TS3274 My Ipad 2 screen stopped working his morning. I've rebooted it. No joy. I've restored it. No better. What next? Who do I take it to?

My Ipad 2 screen stopped working his morning. I've rebooted it. No joy. I've restored it. No better. What next? Who do I take it to or what else can anyone suggest please......

If you have reset to Factory Default and it still doesn't work; bring it to an authorized Apple Sevice Center.

Similar Messages

  • TS3274 My ipad has stopped working, I cannot turn it off as the screen does not appear to be working

    Help. 
    My Ipad will not respond, the screen has stopped working and I cannot turn it off

    My ipad mini just lost screen. I tried the hold both buttons down and i did see the apple logo, but didnt fix it. i know its alive, because it beeps when i connect it to power or computer.  Are there any other fixes?  I received this as a door prizeon black friday and have no receipt?? but i did register it. what should i do?

  • A magazine's app on my iPad has stopped working.  When I open the Newsstand folder and click on the app, the screen dims briefly, then returns to the Newsstand folder. The other app in my Newsstand folder (Wall Street Journal) opens without any problem.

    A magazine's app on my iPad has stopped working.  When I open the Newsstand folder and click on the app, the screen dims briefly, then returns to the Newsstand folder. The other app in my Newsstand folder (Wall Street Journal) opens without any problem, and this magazine's app opens just fine on my wife's iPad.
    I have deleted the app and reinstalled it from the Apple store and that makes no difference.  I have also done a hard reboot on my iPad with no result.
    Any thoughts about what might be wrong? 

    Hey everyone in Apple world!
    I figured out how to fix the flashing yellow screen problem that I've been having on my MBP!  Yessssss!!!
    I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
    I followed the instructions on this page and here's what I did:
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process.  Since I did that, my MBP boots up just like normal.  No flashing yellow screen anymore!!   
    (Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
    Let me know if this works for you!
    Elaine

  • My iPad 2'screen stopped working!!!!!

    HI,
    My iPad 2' screen stopped working.it's under manufacturing warranty.Am i eligible for a replacement?
    By the way I dont have the bill with me ,will the serial number be enough?
    Oxana

    I just ran into the same thing. Screen just stopped accepting any kind of tap or slide input upon taking it out of the case.  I even tried staring at it really hard. 
    This happens to be on an iPad 2 that was already replaced once -- because it just stopped working at all.
    Note: I BABY my iPad.  It has NOT come into contact with water.  It has NOT been dropped.  It has NOT been through extreme temperature changes.
    So.   While I did the reset thing even before coming to this post, and that worked fine, it doesn't instill me with confidence.   And it doesn't answer the question:  "WHY?"   Windows PC users are used to doing the three-finger-salute. I was used to removing the battery from my BlackBerry once a day.  I'm not in the habit of any such thing with an Apple product -- particularly a brand new one.
    What gives, Apple?
    Mike

  • While updating software of Ipad, it stop working and only shows the Apple on screen. How can I recover?

    While I was updating the software of my IPad, it stopped working and only shows the apple logo. How can I recover my IPad?

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • My iPod touch screen stopped working, how do i fix it?

    My iPod(4th generation) touch screen stopped working. Okay so it was fine earlier, my home button does not work so i have been using the assistive button for months, and until earlier today it got stuck, i tried to power it off but it doesn't let me slide to power it off, and it doesn't let me press anything on the assistive menu either, and i'm currently waiting for my ipod to die but it's taking forever since it's battery lasts forever! is there any other solutions you can give me?
    and i was wondering if my ipod has life insurance with apple so if something is wrong with the screen, can i take it for a new one? (my ipod is in very good conditions, not cracked or scratched, just the home button is an issue)
    thanks!

    Try restoring via iTunes. If necessary. try placing the iPod in recovery mode using one of these programs and then restore:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single ClickFor MAC or PC           
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too

  • My iPad 1 has stopped working after trying to instal iOS 5. Can you help restore?

    My iPad has stopped working after trying unsuccessfully to instal iOS5. All that's currently showing on the iPad screen is a white USB cable with a thick arrow pointing towards the iTunes logo (black double note within a white rimmed circle and a blue background).I cannot switch it off and have seemingly lost everything that was on it.
    Please help!

    That means you have to restore the device with iTunes now. So connect the iPad to your computer's iTunes and restore the iPad.
    iTunes: Restoring iOS software

  • Touch screen stopped working on iPhone 5

    Hi guys,
    My brother is using iPhone 5 in iOS 8.0.2 v and suddenly his phone start searching for the antenna and the touch screen stopped working (I can't even side to unlock )!! The screen will be on still the phone reset automatically and when is up it will search again for the antenna and every steps repeat all overThe screen Really got confused what had happened to phone. Even I try to reset it by holding Power bottom and Home bottom after resetting nothing has changed. Also the bottoms stopped working while the screen is on (when I'm holding the Power bottom it won't show me to side for power off )
    Every time I had a problem I posted my problem here, but i got nothing from anyone, if is it for my bad English I'm sorry but I really need some help here.
    What can I do!?
    Thanks

    First, try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. If this does not work, set it up as new device without using the backup, in case it contains corrupt data causing this problem.
    How to back up your data and set up as a new device
    If still no luck, get it serviced by Apple:
    Apple - Support - Service Answer Center

  • After installing ios7, my ipad buttons stopped working, I can't even turn off the ipad. Please help me. I don't know what to do.

    After installing ios7, my ipad buttons stopped working, I can't even turn off the ipad. Please help me. I don't know what to do.

    Try to reset the device:
    Device Reset (won't affect settings/data/music/apps/etc)
    1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
    2. Continue to hold BOTH (ignoring any other messages that may show) until you see the
    Apple logo on the screen.
    3. Release BOTH buttons when you see the Apple logo and allow the device to boot
    normally.

  • Why did my brand new Ipod 5g 32gb touch screen stop working?

    So I got this ipod from the Genius Shop for about a month. A few days ago when IOS 7.1 came out, I updated it. However, the ipod seems to lag a little. Today, I was charging my ipod and for some reason, when I turn it on, the touch screen stop working (the ipod is in perfect condition). The home button, volume button and the on/off button all works fine except for the touch screen. I want to restore everything on my computer, but I can't get pass the lock screen (the touch screen seems to stop working). I just can't do anything on this ipod anymore beside turning it on and off. I can't even power it off because the touch screen is no longer touchable. So how can I restore everything, or do something about this ipod to work again. Can I still take this back to the Genius Shop and get another one without additonal charge?  

    If the reset does not work try the remaining items of:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • HT201412 Iphone 4S screen stops working from time to time

    Iphone 4S screen stops working from time to time.
    sometimes for a few seconds, or sometimes many hours.
    I've resetted it when this happens, with no luck.
    I've restored it from back up, and the problem still persists.
    What can i do?

    Hello,
    I had that problem as well and the apple support suggested to turn off the LTE-mode to have a running system and try to exchange the micro-sim by my provider.
    THAT was not an option!
    BUT it seems to solve my problem in the following way after trying a lot of possibilties:
    In the menue properties/help (don't know the exact english word, because I run my phone in german)
    I switched on the nice feature 'flash LED' by incomming calls, msgs, and push infos.
    Today the flash feature was responding to different push notes very slowly.
    By switching this feature off the LTE-mode-tochscreen-not-responding-problem disappeared.
    We tried this on a other iphone, not having the metioned problem, and switched the LED-flash:
    the problem appeared. Switching the LED-flash off: problem disappeared!
    It seems to be a bug that the LED will hint Calls and MSGs in combination with the LTE mode!
    treated my phone very hard today to double check, but its still ok.
    @Apple:
    Please fix that issue in the next update.
    Hope, this helps you guys as well.

  • My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

    my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
    thanks!

    The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

  • My touch screen stopped working...on my brand new replacement iPod touch.

    I recieved my replacement while on vacation in Vegas, about five days ago. My new iPod has been kept nice and safe in it's case without any bumps that could damage it. Today, May 4th, I go to school with a perfectly working iPod. On my way home, kept safe in my pocket all day, the touch screen stopped working, and restarting it didn't fix it. It's brand new, so whats wrong and how can I fix it PLEASE!

    yes i have the same problem. But also other then the fact that the touch screen doesnt register it is really dark, like there is no light bulb

  • Why did my touch screen stop working?

    Very upset my touch screen stopped working on phone new years eve.  What could be wrong??

        flakris,
    Oh no! This is not what we like to hear. I want to make sure that we are able to get your phone back up and running. Is there any kind of physical or liquid damage to the device? Can you try to press and hold the Power and Volume Down buttons until the device powers off then release (approximately 10 seconds). Please keep us posted.
    KevinR_VZW
    Follow us on Twitter @VZWSupport

  • Yoga 13 touch screen stopped working after update KB3000850, please help!

    Hi, my Yoga 13 touch screen has been working fine until yesterday. The laptop came with Windows 8, and last year I upgraded to Windows 8.1 without issue. Yesterday, I installed optional update KB3000850 from Windows Update, and immediately the touch screen stopped working. I have tried the following methods, all without success:
    * Uninstall KB3000850 from Windows Update
    * Use Windows Restore to restore to the point before yesterday
    * Re-install Intel Chipset Driver from Lenovo official driver page
    * In Device Manager, uncheck all the "allow system to turn off to save power" options for the USB input devices under Human Interface Devices then restart
    * Two-button shutdown and restart
    * Install Lenovo Driver Manager and let it check for new drivers
    * Download Cando multi touch panel driver (Note: I could not install the driver because all I got was a .cab file which does not allow me to install)
    As of now my touch screen is still not working. Computer Information page from Settings shows that there is no touch or pen device for my screen.
    Can anybody help me with this? Thanks!

    Very true, this has been a known problem since the first day Lenovo released the Yoga 13.
    I need to send Lenovo a bill for my time spent rebooting.  So far i am on my 8th reboot.  In the past, around 5 reboots after winddows update would work.  This time... who knows.
    Of course it always happens when you have a deadline.
    Please post back if you have found a better soultion than system restore.
    Thanks for posting this issue.  More users need to bring this to Lenovo's attention.

Maybe you are looking for

  • JDBC BATCH Insert in SAP  XI

    Hi Everyone First of all, Thank you all for such a nice contribution on the forum.  I have few questions I have with SAP and JDBC adaptor.  I was wondering if we could do batch update/insert in XI. let us say I received 10 different records from IDOC

  • Limit size of tables in excel

    Hi everyone, i'm trying to export a table to excel and I'm having some trouble. First, I used "Write To Spreadsheet File.vi" to create a .xls file, and that worked perfectly, but now I need to export another table to a different sheet of the same xls

  • Cant install pse8 on my mac

    i just tried to install the 30 day free trial on my macbook 10.5.8,ive plenty of memory etc bt just at the last minute i get installation failed one or more required components of adobe photoshop elements 8 failed to install correctly any ideas what

  • Service Manager is Dissable?

    Hi Experts, Install SAP B1 8.8 PL10 in Windows 7 SQL Server 2008 R2 Everything Install with Run as Administrator Everything working fine but Service Manager is Disabled. Any idea about this. Thanks, Srujal Patel

  • JDev 11.1.1.2.0: List of fixes?

    Can we get a list of bugfixes? Thanks! Sascha