TS3274 My ipad 3 takes about 30 seconds to come up.There is an Apple icon on the screen during that time.My friends have Ipads that come on instantly. What gives?

My Ipad 3 takes about 30 seconds for the screen to come on (an Apple icon )is all that is on
for the first 30 seconds or so. However my friend's have Ipad that come on instantly.What gives
with mine?

Are you switching your iPad off completely (i.e. using the 'slide to power off') and are they just putting their's into sleep mode ?

Similar Messages

My iphone 4s wont turn on,it wont even charge,when it does eventually start to charge the apple icon on the screen will appear for a few seconds then itll disappear, i have tried to do the soft/hard reset but nothing happens, can anyone help me please?

My iphone 4s wont turn on,it wont even charge,when it does eventually start to charge the apple icon on the screen will appear for a few seconds then itll disappear, i have tried to do the soft/hard reset but nothing happens, can anyone help me please? do i have a dead iphone on my hands? isit worth me going into the apple store and seeing what they can do or isit pointless? please help!!!

Try to backup and restore you device in itunes...restoring the device is like removing the iOS software off the device and re-add in a newer software, after you have restore you device, MAKE SURE YOU SET UP YOUR DEVICE LIKE A NEW DEVICE, DONT NOT RESTORE FROM BACKUP!!... give the device a chance to use the newer software and see if the issue still persisting, if the issue still on going then its would be a hardware issue.
Call Apple Care and see if your device is still under warranty to get it replace

My ipad 2 turnes to black screen with the apple icon in the middle, it just hanged and i have to restart it?! so why this is happening ?! is there is an error or something i can do to prevent doing this ?!

my new ipad 2 turnes to black screen with the apple icon in the middle while using it or if i just left it locked for a while, it just hanged and i have to restart it?! so why this is happening ?! is there is a productio error or something i can do to prevent doing this ?!
Appreciate responding as soon as possible.

No, it's definitely not normal. Your User's Guide recommends a series of troubleshooting steps to go through when your iPad is misbehaving: As you're already in effect doing the first of the main steps, a Restart of your iPad, and that's not curing it, move on to the next .. a Reset.
To do this, press and hold both the Home and the Sleep/Wake buttons for about 10-12 seconds, until the display blanks and the red Power Off slider appears. Continue holding the buttons until the slider disappears, replaced by the black screen and white Apple logo.
This shows your iPad is starting to reboot. Release the buttons and allow the process to continue until the Lock screen appears again, then slide the slider to complete the process.

Screen auto dims and after about one second, it sleeps. If you try to catch it and undid the screen during this time, it freezes and you have to hard reset.

If you leave the laptop untouched, it will auto dim the screen.
About one second after autodim, the screen will turn off.
If during that one second duration, you try to undim the screen (by touching the touchpad, for example), the laptop will freeze and the only way to turn it back on is by holding the power button.

1. System Preferences > Energy Saver
    Press the "Restore Defaults" button.
2. Reset PRAM. http://support.apple.com/kb/PH4405
3. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

Just installed windows 7 Ultimate using Boot Camp. Problem is when I chose to boot the windows partition, I get the windows icon on the sreen showing that it is starting, but few second after I get a black screen

Just installed windows 7 Ultimate using Boot Camp. Problem is when I choose to boot the windows partition, I get the windows icon on the screen showing that it is starting, but few second after, I get a blank screen. I suspect a driver (screen) issue, since I also installed Parallell using the boot camp partition and that works fine.
Do anybody out there has an ideal of what to do to solve this issue.
Thanks
Pierre317

Hi Pierre,
more tips can be found here ...

I upgragraded my Ipad operating system to ios7. Since then, the key pad has become very lathargic. It takes about 15 seconds to response. Can anyone offer a solution.

I upgraded my operating system of the Ipad to ios7. Since then my keypad has become very lathargic. It takes about 10-15 seconds for any alphabet punched on it to appear on the screen. Very frustating. Can anyone offer a solution?

Reset all settings
Settings>General>Reset>Reset All Settings

When using my ipad air it keeps coming off the page I'm on or app and going back to the home screen. Also when using my ipad the screen will go white with a black apple icon in the middle for about 20 seconds then it makes a ping

When using my ipad air it keeps coming off the page I'm on or app I am using and going back to the home screen. Also when using my ipad the screen will go white with a black apple icon in the middle for about 20 seconds then it makes a ping sound and goes to the home screen. Could anyone help please. Thank you :-)

Read here:
http://help.apple.com/ipad/8/#/iPad9a245e3e

Opening files from a Novell-Share takes about ten seconds

Hi there,
first a few information about our environment:
Windows 7 Enterprise SP1 Clients with Novell Client installed in latest version
Windows Server 2008 R2 DCs
Network-shares based on Novell Netware
When accessing files on Novell-Shares for the first time it takes about 10 seconds to open. Reopening it or any other file at this location again is totally fast. Waiting about 15 minutes after closing the file causes the lag again.
We traced our client-side network traffic and saw many Netbios-queries which failed because our WINS-Servers do not know the Netware-Servers. So first it tried it using every WINS-Server (three in our env.) and then on broadcast in the local subnet three
times. It got no answer and timed out.
So the next step I tried was to disable Netbios-over-TCP/IP with the radio buttons in the Network Adapter settings. After a reboot, the problem reoccured, but there were no more Netbios queries in the trace.
After days of searching for a solution I tried to stop the "TCP/IP-Netbios-Helper"-Windows Service on spec. And suddenly every network share access was totally fast. We tried this with other clients, too. Same behavior! We even did not disable
the NetBios-over-TCP/IP setting. Stopping the service was all we needed to do.
Unfortunately disabling the service causes problems. The Windows-Login fails with a message "No Logon servers available". Using the full qualified user name ("[email protected]") works. But then we saw that policies were not applied.
Any ideas, what could cause the lag? Or is it possible to disable this service without any side-effects?
Bye,
Jürgen

Hi,
What is the result if we access files on other network shares？
I found a thread in novell forum and suggestion is checking the provider order and put Netware first, open network and sharing center, change adapter settings, Select Advanced on the menu> Advanced settings, Click on Provide Order Tab and change order.
And have you contact the novel support team? They're more familiar with this product.
http://forums.novell.com/forum.php
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

Firefox 4.0 takes about 60 seconds to start even after reinstalling.

Firefox 4.0 takes about 60 seconds to start. I have tried reinstalling with no change. It isn't antivirus software, as I turned that off and it was still slow. I run Vista Ultimate. Internet Explorer loads very quickly.

I wish my Firefox would load in 16 seconds!! It takes 3 to 4 mins to load but closes almost instantly.

Background noise removal takes about 3 seconds into each clip in timeline to kick in, so each clip has noise in the first few seconds. How do you get this to remove noise from the very start of the clip?

Background noise removal takes about 3 seconds into each clip in timeline to kick in, so each clip has noise in the first few seconds. How do you get this to remove noise from the very start of the clip?

insert a 5 second gap in the beginning of the timeline.

Sunce i upgraded my MBP Retina, it became slower than before when i shutdown. Now, it take about 25 seconds to go off while before was about 5 or 6 seconds. any suggestion?

Sunce i upgraded my MBP Retina, it became slower than before when i shutdown. Now, it take about 25 seconds to go off while before was about 5 or 6 seconds. any suggestion?

Have a cup of coffee.

When i use google earth or somebody sends me a message or just simply opening a new tab, it crashes and it takes about 30 seconds to start working again, its not my computer as it is new and it has high spec, any help? thanks

When i use google earth or somebody sends me a message or just simply opening a new tab, it crashes and it takes about 30 seconds to start working again, its not my computer as it is new and it has high spec, any help? thanks

I figured it out!
I read a solution for something that sounded similar.
Anyone in similar position:
Open iTunes app on iPhone, and pick an option from bottom, such as music. Then scroll down to bottom of page and where your iTunes ID is, press on it, and pick sign out.
Then return to home screen, and double press home button and press and hold on first icon showing, until a minus symbol appears in the top left of icons present. Press on each minus symbol on each app in turn, until all app icons have disappeared. Then Restart the phone by pressing and hold the home button and the on/off/standby button at top of phone, until the apple symbol appears in centre of blank screen.
Swipe to turn phone fully on and open settings and scroll down to iTunes and apps option and tap that. Pick sign in and put in your apple ID, it will accept it and then return to home screen and open iTunes a you'll find it works fine
Simple really, but some like me won't think f this themselves!
Hope that helps

Activation of Samsung 226BW Monitor takes about 15 seconds

Since I have upgraded Mac OS X to Yosemite (10.10) (currently using 10.10.1) my Samsung SyncMaster monitor (226 BW) on Thunderbold takes about 15 seconds for activation. Before I can see a picture on the monitor there is just a rustle with gray and black. I also know a second case where this problem is absolutely the same.
Has anyone an idea how to solve this? I am using the original Apple Thunderbold to DVI adapter. The problem only occurs if I plugin the thunderbold adapter while my MacBook Pro is already running.

Reset all settings
Settings>General>Reset>Reset All Settings

I have 2 hotmail accounts. They worked fine the first month or so, now about 20 seconds after I sign on, it goes to an send message screen but I cannot send. When I go back to inbox, it resets to the send screen again. HELP.

I have 2 hotmail accounts. They worked fine the first month or so, now about 20 seconds after I sign on, it goes to an send message screen but I cannot send. When I go back to inbox, it resets to the send screen again. HELP.

Here you can see how you can setup your Hotmail accounts in the Mail App on the iPad; http://convert-dvd-ipad.com/dvdipad/setup-hotmail-microsoft-exchange-ipad-2/

About a month ago, I began periodically getting the spinning wheel while trimming, adding titles or transitions, etc. It lasts for about 15 seconds and then goes away. This seems to happen once every minute or two. I have more than enough RAM/Power.

About a month ago, I began periodically getting the spinning wheel while trimming, adding titles or transitions, etc. It lasts for about 15 seconds and then goes away. This seems to happen once every minute or two. I have more than enough RAM/Power, etc. About every other time I use FCPX it will spontaneously close (typically when editing a title). None of these things were happening previously. I have lots of projects that I store on Promise Pegasus drives via Thunderbolt. I only keep a few projects and the associated events open in FCPX at a time, otherwise I use Event Managaer X to keep track of them. Can anybody give me any suggestions as to why this is occurring and what I can do to remedy it? I have the latest version of FCPX as far as I can tell. This is driving me mad and costing me significant time while editing. By the way, I am doing just basic editing. Essentially trimming, cutting and adding some transitions and a few title screens. Thanks in advance for your help.

These apperarances of the spinning wheel tend to be related to some io operation that takes too long. Maybe the finder is trying to reach a network server that became unavailable.
I would try clearing caches and do an overall maintenance with an utility like OnyX.
Also, trashing preferences does no harm and is often the first troubleshooting measure when FCP X misbehaves.

TS3274 My ipad 3 takes about 30 seconds to come up.There is an Apple icon on the screen during that time.My friends have Ipads that come on instantly. What gives?

Similar Messages

Maybe you are looking for