TS3274 My IPad button disappears in Itunes (updated) when I click on it, now I cannot do anything.
My IPad button disappears in Itunes (updated) when I click on it, now I cannot do anything.
Bingo! Thank you so much for your help, I was ready to give this thing to my wife and buy an Android unit...
Similar Messages
-
My 'clear history button is not working. When I click on it it doesn't do anything and the letters are gray instead of blue like usual. I've gone to every type of settings I can think of but I don't know how to fix it. Please help .
T
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device. -
Having Problems Updating iTunes 10.6.3, it wont update when I click the download button to update the itunes. What should I do to fix the issue? And does Anyone esle have this problem?
Just want to update the problem everybody is having downloading the new update. If you waited, and didn't try to reinstall or anything, it looks like a "fix" is coming to you. My previous ITunes was working fine so I decided to just wait it out and see if Apple would fix it. Knew it wasn't my computer because of all the same questions in this forum. And I want to let all to know that when I signed on to my computer today an Apple Software Update window popped up on my desktop. (Not the little one we've all been clicking on from the ITunes screen.). This came up right on my desktop. I clicked on it to download and it worked like a charm. After it was done downloading I pulled up ITunes and all looked great, all my purchases, songs were still there. I then plugged in my IPod and then my IPad and they both synced, etc., ....all is well again! So it you didn't try to re-install or anything, and have just been waiting and using your current version of ITunes, be patient. Looks like the fix will be coming to you, too.
-
Windows 7PC no longer detects iPad 3 after latest itunes update. Why?,
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
Cheers, Tom -
I bought my iPad from a friend and updated to iOS 7.1. Now in order to activate it I need to sign in using the original iTunes account but I can't contact the owner. Is there a way to get past this or should I toss my iPad into the garbage?
Ask previous owner to remove his device from account
http://support.apple.com/kb/TS4515 -
My iPad 2 has no " software update " when I go to settings/general. How can I get iOS 5 in this case ? Thank you.
<E-mail Edited by Host>The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623 -
Ok so i have this iPod touch (3rd gen) and i'm trying to update it through iTunes and when i click check for update it keeps saying this version of iPod software (2.2.1) is your current version. what do i do? how do i update it?
You have a 1st generation iPod Touch. It can not be upgraded beyond iOS 3.1.3, it is available at the link below.
http://support.apple.com/kb/HT2052 -
My iTunes won't update on my computer. I have windows vista. I can open up itunes and when I click on "check for updates" it asks if I want to download iTunes version 11.1.5 and I click "Download iTunes" but then nothing happens. Sometimes uptop the loading bar will appear but for only a split second. I have tried restarting, shutting down, I cannot figure out why it won't download. What's happening and how do I fix it?
Try updating using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/ -
I installed the latest itunes update, 11.4.0.18. Now itunes crashes every time I try to open it.
I installed the latest itunes update, 11.4.0.18. Now itunes crashes every time I try to open it.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
You could also try working through
TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
tt2 -
Trying to download from iTunes and when I clicked on the Sync button, it indicates that it is waiting to sync. Then it comes back saying sync failed. What is the problem ?
Few questions..
are you using windows or mac?
what version of itunes are you using?
have you EVER been able to successfully sync with itunes?
what iOS version are you running on your phone?
This is a great article for syncing with itunes. Good Luck
http://support.apple.com/kb/HT1386?viewlocale=en_US -
After downloading the latest iTunes update, when I open Outlook on my pc, I am getting an error message that MobileMe has encountered a problem and needs to close. What's up with this?
You're welcome.
tt2 -
I have an Iphone 4s 32gb and i'm trying to update it to ios 5.1. i've downloaded the software from itunes but when i click on it to install it to my actual phone it says: "There was a problem downloading the software for Iphone 'Donnbjj1's Iphone' . An unknown error occurred (1480)."
iOS: Resolving update and restore alert messages
For error -50: See error 13 and 14:
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network. -
have purchased ringtone on iphone 4 not in my itunes library when i click devices, transfer purchases from, it appears in tones in my library but in a paler shade of print with a dotted circle to the left of it, if i try to click on it or take any other action it disappears and leave a blank space i have tried this several time i want to transfer library to my new iphone 5 but i will loose the ringtone
I had the exact same issue!! Seriously p*ssed me off when I checked out my ITunes purchased items (via my computer) and noticed that most of the additional tracks listed on my IPhone playlist was listed there too. However, I never authorized any purchases!! (I have actually written Apple Support asking for a full refund of all tracks listed on my purchased list)
Be careful when you swipe your finger to the left/right on those "additional" tracks on your IPhone playlist... I'm pretty sure that the cloud symbol is an option to download or automatically buy those tracks.
Solution for the problem:
1 - go to your IPhone settings
2 - choose "iTunes & App Store"
3 - go to "Show All" & "Music"
4 - turn off "Music" by moving the bar to the left (it should be a white color once you turn it off)
Should solve your problem :~) -
I tried to install an update on my phone and it went a screen that that said I had to connect to itunes, but when idid nothing happened and now I tried to restore my phone and it wont' activate
Hi
You could order the Full Retail Version of OS X (Black DVD with a silver X on it). Regarding always starting up in Open Firmware, in this thread a bloke had the same problem until he disconnected his peripherals before restarting. See if the entire thread helps:
http://www.macworld.com/forums/ubbthreads/showflat.php?Cat=&Board=UBB13&Number=2 43591&Main=243591
Steve -
Installed itunes update 10.5.0.142 and now get the error message "Disc Burner or Software Not Found" when trying to burn playlist to disc. Windows 7
Hello queenabs,
It sounds like you are trying to burn a playlist to a disc in iTunes, but you are getting the error, "disc burner or software not found." I found a couple of resources that I think might help with an error like this.
I recommend starting with the steps in this article:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
http://support.apple.com/kb/TS2308
If you are still having trouble with burning a disc after following the steps in that article, I recommend following the steps in this article:
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Thank you for using Apple Support Communities.
Best,
Sheila M.
Maybe you are looking for
-
Replacement iMac A1058 17" Hard-Drive
Hi guys. About 2 years ago my iMac began malfunctioning on start-up; A few clicking noises, and then to a folder with a flashing question mark. I was going away for uni at the time, so didn't do anything about it, leaving the problem until I got home
-
Yosemite, Security Settings Does Not Unlock
Hi, I am trying to change my security settings so unapproved software can be also installed. However, when I click on the lock, it does not unlock after I type in my credentials and I am an admin on my computer. Can anyone help with this? By the way,
-
Invoice date always use todays date
Hello! Is there a user exit we can use to always set invoice date = today? In VF01 or VF04 is it also possible to set system to always use todays date? Regards
-
No marker on JFreeChart into Pdf file by IText, why?
Hello everyone, I have a question which has wasted my few days. I created a web report with JFreechart and Table on Panel. There is a Value Marker (vertical line ) on the line chart which created by JFreeChart. They all work fine on the website. Then
-
Refresh Metadata in Aperture from Master
Guys, I use gpsPhoto.pl to geotag my photos. The script works directly on the NEF. Unfortunately, Aperture doesn't seem to recognise changes on the Metadata in the Master. So, what do I have to do to make Aperture acquainted with these Tags? And no,