TS3274 my ipad doesn't rotate correctly when I turn it.  what do i do?

All of sudden my ipad doesn't rotate when I turn it no matter what buttons i push in settings.  Has anyone else had this problem & have an answer?

Try rebooting the iPad and see if that helps.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up

Similar Messages

  • TS3274 My ipad deletes pictures from gallery when i turn it off

    im running 5.1.1 on my ipad 2. please help

    Try rebooting the iPad and see if that helps.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up

  • IPad doesn't rotate anymore

    I don't know how we did it but our iPad used to rotate and when we using the map to navigate in Perth, we changed it to stop rotating but cannot remember how we did it to allow rotating again

    Depending on how you've got Settings > General > Use Side Switch To set, it can either be turned off via the switch on the right-hand side of the iPad, or via the taskbar (double-click the home button, slide the taskbar to the right, and it's the icon far left) - the function that the switch isn't set to is controlled via the taskbar. More info on the side switch/taskbar here http://support.apple.com/kb/HT4085

  • My ipad doesn't rotate to portrait mode when reading email why?

    I have set up my mail but my ipad does not rotate to portrait

    My ipad rotates everywhere else but when mail mode.  I can only view mail on landscape, two columns, mail boxes to the left and mail content to the right.  When I flip the pad to portrait it remains the same way and it does not flip as it is supposed to.  No, I do not have the lock button set to lock screen but to mute.  Any ideas?

  • TS3274 My iPad doesn't respond to home button prompting and locks on a screen.

    My iPad doesn't respond to home button prompting and locks on a screen.

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Can't get a 1st generation ipad past the itune icon when i turn it on.  just bought it and need to run setup

    I have bought a supposedly new 1st generation ipad.  arrived by mail today.  when i turn it on, i can only get the itunes icon to come up.  can't get into the setup.  Recommendations?  [email protected]

    Turn off your iPad and put it in recovery mode. Try to restore it via iTunes.
    http://support.apple.com/kb/HT1808

  • When I turn my iPod. 16GB Apple iTouch Black 4th Generation - ME178BT/A off half way through a track, why doesn't it resume when I turn it back on from where I left it????

    I have just recently been bought an ipod touch 4th gen 16gb as a gift, I have uploaded all my music on to it and have been using it but every time I turn it off when half way through a track when I turn it back on to carry on listening to the track where i'd left it it doesn't resume play!!!
    Can somebody please tell me why this is the case? as this is very annoying!!!!!
    Thank you for your time and cooperation.
    Kind regards
    Jamie

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             

  • TS3274 I iPad 2 went black while I was on it what should I do?

    My iPad 2 went black while I was on it what should I do

    Did it go to sleep? Try tapping the home button once.
    Did you exhaust the battery? The iPad only stays powered for 8-10 hours.
    Have you plugged the charging cable into the iPad and it's charger and plug the charger into wall power to charge the iPad?

  • IPad doesn't display correct album art

    I could really use some help here, I am at the end of my rope.  I have HomeSharing on so that my iPads and iPhones will play music and movies from our iTunes library.  I have an iPhone 5, an iPhone 4S, an iPad 4 and (2) iPad 2 models.  Both iPhones and the iPad 4 will display the correct album art in the movies but the iPad 2's scramble up the album art.  For instance on the iPad 4 shows the Aladdin album art where it says Aladdin is but on the iPad 2 (both of them) it will display random album art.  So you'll be looking at a picture of Bug's Life but the line states that the movie is Aladdin.  Now when you select that movie and it enters the info page where the play button is, the album art comes up correctly.  It's just in the title screen or selection screen this happens.  Then to add to that, the music and music videos all displays fine, the correct album art every time.  For some reason, this is only happening in the movies.  And again, only happening on the iPad 2's.  There is no issue with the newer iPad or the iPhones.  So is this a setting that is goofed?  A software issue that I can't resolve?  I would appreciate any input you can provide, especially if you can help me fix this!! 
    FYI, the iPad 2's are my daughter's so I have the PG restriction on making sure that they can't watch anything PG-13 or over.  Although it won't display a PG-13 or over movie, it will display the album art (for instance it will show Hills Have Eyes instead of Aladdin although the text shows Aladdin and again, if you click on it the correct album art shows Aladdin in the info screen).  I thought maybe the restrictions were the problem so I shut them off but that didn't resolve the issue.

    Me Too. Glad to hear I'm not alone in this...
    I can't explain it. All my songs show the correct art in iTunes but it's often mismatched on the Nano. I've noticed that selecting a problem track in iTunes, get info and clicking "ok" on the already correct art, sometimes corrects the issue (for that one track) on the Nano after the next sync.. but not always.
    p.s. Other posts say "restore" is the answer. I'll try that tonight.

  • Iphone 4s Photos not rotating correctly when transferred to computer.

    When transfering a photo or video from an iphone to a computer the pictures and videos are all updside down.  I have an iphone 4s and was wondering if this is a bug or if there is a way to fix this?  thanks
    Additional note - i use a windows 7 pc

    I am having the exact same problem. I am transferring photos via icloud to my windows 7 PC, some pictures I can rotate and others I can't. I get an error about file properties, even though the file properties are the same as the photos I can rotate. This is definitely some kind of bug.

  • Muse phone site doesn't display correctly when viewed on mobile device, any advice to fix this?

    You can view the website at www.conceptfizz.co.uk , desktop works fine, but phone version doesn't load full screen, only on the left hand side. Thanks

    It's definitely loading the mobile version. select everything on the page to check that you haven't left any objects on the right hand side of the page, or that any widgets' bounding areas haven't expanded out too far - this often happens when you move components around.
    David

  • ICal doesn't install correctly when reinstalling Mac Tiger OS X

    I have been trying to help my dad with his Mac. This weekend we went ahead and wiped out the hard drive and reinstalled Mac Tiger OS X. When it came to installing Disk 2 (he doesn't have a DVD) it said error installing iCal, and we had to restart and install Disk 2 again. This happened about 7 times and we gave up. In the Log Viewer Mac say the iCal files are too big, and the second line mentions that some iCal file are written incorrectly.
    I was wondering if we can start all over again and begin with Disk 1 or skip installing iCal.
    Can someone help us please?!?
    Thanks!
    Bernie

    If the computer isn't connected to the Internet, download the Pacifist dmg file on another machine and then transport it to the computer where you are trying to install iCal to. If you download it on a PC, don't attempt to open the downloaded file on the PC.
    (14604)

  • HP monitor doesn't rotate display when monitor rotated

    I am using a new (to me) HP Optiplex with  windows 7 professional installed.  I installed the drivers for the existing HP w2408h 24" Monitor from the HP website.  It is supposed to rotate the display to the vertical position when the monitor is rotated, as it used to do with the HP computer it was previously attached to.  An attempt to reinstall the drivers resulted in a message that the reinstallation is denied.  Has an one else had this problem?

    Hello Adirondaker,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that you are having some issues with the rotation of the display on your monitor, and I would be happy to assist you! 
    Since you are getting an error message that states "reinstallation is denied", this may indicate that you do not have adminstrative rights on your computer. And because your Optiplex desktop is a Dell Computer, you will need to speak with their tech support in order to further troubleshoot the issue on your computer.
    In regards to the software needed for your monitor, you can get your issue more exposure by posting it in the commercial forums, since this is a commercial product. You can do this at: 
    http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/bd-p/bsc-271
    I hope this helps!
    Regards 
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • [solved] texlive doesn't work correctly, when lmodern is used

    Hi!
    I've got a problem with texlive: When I use the package lmodern and my document contains mathematical symbols like integrals or sums or special chars like german umlauts, dvips and pdftex give me error messages and the symbols are not displayed correctly in the resulting document.
    Here an example .tex-file:
    \documentclass{scrartcl}
    \usepackage{amsmath}
    \usepackage{lmodern}
    \begin{document}
    $$\int_0^r e^{-x} \sin(x)\,\mathrm dx$$
    \end{document}
    dvips gives the following output:
    kpathsea: Running mktexpk --mfmode ljfour --bdpi 600 --mag 1+0/600 --dpi 600 lmex10
    mktexpk: don't know how to create bitmap font for lmex10.
    kpathsea: Appending font creation commands to missfont.log.
    dvips: Font lmex10 not found, using cmr10 instead.
    </usr/share/texmf-dist/fonts/pk/ljfour/public/cm/dpi600/cmr10.pk>
    dvips: Checksum mismatch in font lmex10
    kpathsea: Running mktexpk --mfmode ljfour --bdpi 600 --mag 1+0/600 --dpi 600 lmmi8
    mktexpk: don't know how to create bitmap font for lmmi8.
    dvips: Font lmmi8 not found, using cmr10 instead.
    </usr/share/texmf-dist/fonts/pk/ljfour/public/cm/dpi600/cmr10.pk>
    dvips: Design size mismatch in font lmmi8
    dvips: Checksum mismatch in font lmmi8
    kpathsea: Running mktexpk --mfmode ljfour --bdpi 600 --mag 1+0/600 --dpi 600 rm-lmr8
    mktexpk: don't know how to create bitmap font for rm-lmr8.
    dvips: Font rm-lmr8 not found, using cmr10 instead.
    </usr/share/texmf-dist/fonts/pk/ljfour/public/cm/dpi600/cmr10.pk>
    dvips: Design size mismatch in font rm-lmr8
    dvips: Checksum mismatch in font rm-lmr8
    kpathsea: Running mktexpk --mfmode ljfour --bdpi 600 --mag 1+57/600 --dpi 657 lmmi10
    mktexpk: don't know how to create bitmap font for lmmi10.
    dvips: Font lmmi10 not found, using cmr10 instead.
    </usr/share/texmf-dist/fonts/pk/ljfour/public/cm/dpi600/cmr10.pk>
    dvips: Checksum mismatch in font lmmi10
    kpathsea: Running mktexpk --mfmode ljfour --bdpi 600 --mag 1+0/600 --dpi 600 lmsy8
    mktexpk: don't know how to create bitmap font for lmsy8.
    dvips: Font lmsy8 not found, using cmr10 instead.
    </usr/share/texmf-dist/fonts/pk/ljfour/public/cm/dpi600/cmr10.pk>
    dvips: Design size mismatch in font lmsy8
    dvips: Checksum mismatch in font lmsy8
    kpathsea: Running mktexpk --mfmode ljfour --bdpi 600 --mag 1+57/600 --dpi 657 rm-lmr10
    mktexpk: don't know how to create bitmap font for rm-lmr10.
    dvips: Font rm-lmr10 not found, using cmr10 instead.
    </usr/share/texmf-dist/fonts/pk/ljfour/public/cm/dpi600/cmr10.pk>
    dvips: Checksum mismatch in font rm-lmr10
    </usr/share/texmf/dvips/base/tex.pro>. [1]
    Also, a file named missfont.log is created and contains the following:
    mktexpk --mfmode ljfour --bdpi 600 --mag 1+0/600 --dpi 600 lmex10
    mktexpk --mfmode ljfour --bdpi 600 --mag 1+0/600 --dpi 600 lmmi8
    mktexpk --mfmode ljfour --bdpi 600 --mag 1+0/600 --dpi 600 rm-lmr8
    mktexpk --mfmode ljfour --bdpi 600 --mag 1+57/600 --dpi 657 lmmi10
    mktexpk --mfmode ljfour --bdpi 600 --mag 1+0/600 --dpi 600 lmsy8
    mktexpk --mfmode ljfour --bdpi 600 --mag 1+57/600 --dpi 657 rm-lmr10
    I used lmodern several times in the past and it worked correctly. Maybe some update lead to this...
    Can anyone confirm this problem or give some hints, how to solve this problem? I tried reinstalling all texlive packages, updmap, fmtutil...
    Thanks for help!
    Michael
    EDIT:
    Reinstalling all texlive packages didn't help. But uninstalling them, deleting all files in /usr/share/texmf* and reinstalling them did help. I don't know why, but the problem is solved. Sorry for the inconvenience.
    Last edited by Bevan (2010-02-20 23:51:43)

    The way some TeX-related font packages use updmap-sys to update TeX's font database (/etc/texmf/web2c/updmap.cfg) may cause this problem. For me, minionpro started to give similar 'missfont' errors when I upgraded texlive-latexextra.
    I don't know the right/best way to handle TeX fonts and use updmap-sys in install files, however installing *.maps files into the /var/lib/texmf/arch/installedpkgs/ directory seems to be a more robust solution than calling updmap-sys with '--enable Map' or '--enable MixedMap' options. Adapting the code used in the build files of texlive-latexextra for minionpro solved the problem for me.
    The steps I did:
    Create *.maps file (minionpro.maps).
    Modify  the PKGBUILD (modified minionpro PKGBUILD):
    Add '$pkgname.maps' to the 'source' variable.
    Add these lines to the top of the build() function:
    install -m755 -d $pkgdir/var/lib/texmf/arch/installedpkgs
    install -m644 $pkgname.maps $pkgdir/var/lib/texmf/arch/installedpkgs/
    Update the 'md5sums' variable.
    Modify  the install file to use the *.maps file when updating TeX's font database (modified minionpro.install).
    I hope this helps to solve problems related to other TeX fonts as well.

  • TS3274 Screen image doesn't rotate

    Screen image does not rotate with iPad position

    Is there a lock symbol at the top of the screen next to the battery indicator ? If so, then depending on what you've got Settings > General > Use Side Switch To set to (rotation lock or mute notifications), then you can lock/unlock the rotation by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
    If there isn't a lock symbol then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Maybe you are looking for