TS3274 My iPad has stopped finding any wifi networks

My iPad has stopped finding wifi networks

Check to see that you are using the cable and charger that came with the iPad, especially the charger itself. If you are trying to charge using the PC, it's USB ports are likely not capable of delivering enough current to properly charge the iPad.

Similar Messages

  • IPad can't find ANY wifi networks or personal hotspot each time I return to my home network

    I have an iPad 2 as well as iPad 4, iPhone 4 and Macbook Pro. Each of these connect fine to my home network, however my iPad 2 suddenly couldn't find any networks or my iPhone 4 personal hotspot, bluetooth or wifi.
    I went to Singapore and hey presto, it could find and connect to wifi networks with ease.
    Then I came home to Australia, couldn't find any networks or personal hotspots again. Went to work, same issue, couldn't find the network at work. So took it to the Apple Genius Bar and it worked automatically again without changing any settings. Reset to factory settings just incase this somehow helped getting it home.
    Took it home, worked fine. Recovered from a previous backup and still worked fine.
    Brought my ipad into work yesterday, couldn't find my personal hotspot or wifi networks. Took it home, can't find any networks. Reset my modem and it still can't find any networks (or my personal hotspot) even though all other devices automatically connect.
    Any suggestions? I suspect when I take it to Japan next week it will probably work fine, then I'll come home and it probably won't. Is it some sort of software issue? Why would it stop working every time I take it out of my home network and bring it back?
    I have all the latest updates.
    Thanks in advance and reading through!

    Does the ipad have any management software put on by your workplace ? If so this my be somehow disabling your wifi. The other thing it may be is the wifi channel your wifi is broadcast on but as it happening to you with a lot of access points it prob isn't this it may be a hardware issue, you could take it To an apple store and if it works there try connecting it to your phone. You could also try this, go to general > one of the last options (between VPN and reset) is profiles (This only shows up if u have profiles installed) if you have profiles go into it and delete the profiles then restart. this may help. Good luck

  • TS1398 imac connects to internet for a few mins then stops and cannot find any wifi network-other devices are connecting without problems

    My imac has suddenly stopped connecting to the internet through my wifi network if I restart the machine it finds the network for a minute or 2 and then stops working and cant find any wifi networks, other devices are connecting with no problems. Any suggestions please

    Try posting in the iMac forum. This is the iPod touch forum.

  • My ipad has stopped connecting to wifi, a reset hasn't worked, what else can I try? (the wifi is fine as other apple products connect ok)

    My ipad has stopped connecting to wifi, a reset hasn't worked, what else can I try? (the wifi is fine as other apple products connect ok)

    Have you tried a 'hard reset'. You do not lose any of your data on the iPad.
    Here are the steps:
        Press the Power Buton and the Home button simultaneously.
        Continue to hold down both buttons until the iPad shuts off
        Release the buttons when the Apple Logo appears.
    Also, make sure your iPad is not in airplane mode. Settings, Airplane mode is the first option under settings,
    Hope this helps.

  • TS1398 My phone is not able to find any wifi networks.

    My phone is not able to find any wifi networks.
    I have another i phone and it is connected just fine, my ipad and computers are conneted just fine.
    I followed apples directions but still not working.
    It stopped working around december 5th.

    Thats odd unless its a Windows 9x system lol. You shouldn't need drivers for USB storage devices. They are designed to identify themselves as Mass Storage class devices which will run with the built in drivers after Windows 98.  Occasionally you will get a device that have deliberately been designed to not meet the standards (for extra features) but you saying this happens with other USB devices says this isn't the case.
    Does it only happen with storage devices? Like hard drives, flash drives etc?
    The model and windows version shouldn't make much of a difference in this case but it doesn't hurt to know what kind of system you are using.
    Look up the USB controller in your system, if there are drivers for that, download them. If it's an already Windows supported device there is no need to download anything for it (have your Windows disc handy if you use XP) then uninstall the USB controller from the Windows Device Manager using the option to remove the drivers as well if the option is there.  Restart and let Windows find the USB controller and install it (and any other devices attached to the USB bus). You may find your keyboard, mouse and any other USB devices won't work until Windows has finished installing them.  Just give it some time, Windows will get there.

  • After I connect with my iPhone (3GS 5.0.1) to any Ad-hoc wireless Network then walk away out of the reach of my wifi network, my iPhone can't find any wifi Network afterwards, only by turning off the iPhone completely and turning on again.

    After I connect my iPhone (3GS 5.0.1) to any Ad-hoc wireless Network then walk away out of the reach of my wifi network, my iPhone can't find any wifi Network afterwards, only by turning off the iPhone completely and turning on again.
    switching off wifi and on again or going into airplane mode did't help!
    This problem happens only with ad-hoc wifi networks not with normal ones.
    (Ad-Hoc network was created on XP Computer)

    Welcome to Apple Discussions
    Sorry, but the 169.x.x.x IP address is internally generated by the iPod (and iPhone) and indicates that a network has been detected but no IP address has been issued. Your friends iPhone was not connected to your ad hoc network either - it connected to the internet through the 3G network.
    You should read through the Vista help screens on ad hoc networking for some insight how this works. You should be able to get some ideas there.
    In the mean time, $40 or less will buy you a very capable wireless router with four Ethernet ports and will simplify your network tremendously. Having used Windows ICS for a long time, the addition of a router and a real network simplified things so much.

  • HT1695 Can't Find any wifi Networks after updragding to 6.0.1

    My iPhone 4 can't find any wifi networks after upgrading to iOS 6.0.1 and i can't downgrade what should i do ?
    I swtiched off  the connection from mobile and restared the router and nothing changed!
    Note: My laptop found about 7 Networks my iphone finds nothing

    I have the exact same problem.
    It popped up on my 8gb iPhone (2.0.1) first time when i just purchased it. The Wheel spins as if it's searching for hotspots (and there are a lot of hotspots where i live). My MacbookPro finds them without any problems.
    Second time i experienced these problems, it was after i didn't have a chance to charge the phone, and i figured it was a "Low battery, disable wifi" thing. But even though i charged it fully, it still can't scan networks.
    I managed to discharge the battery, until the 10% warning popped up. I connected the charger, and sure enough, it was able to scan networks. Then when i tried to join a network, it stopped working again, and since then i've been unable to scan wifi. Now 3 resets, and a lot of fiddling later, i'm no further than i was before.
    The fact that it was able to scan momentarily points me in the direction of the software, but i'm not so sure anymore.
    Hope someone can shed some light on this.

  • My ipad has stopped receiving any texts

    Why might my ipad have stopped receiving any texts.  I am still getting them on my Iphone, and up until a few days ago, everything was syncing nicely.

    Go to Settings>Messages>Sned and Receive at>You can be reached by iMessages at. Make sure that your iPhone number is still selected as the contact number and if it has gone missing you will need to add it back to the iPad in this setting.
    The best way to do that is to sign out of Messages on your Phone and your iPad, then sign in again on the phone first and the number should be available as a choice in the "you can be reached by iMessages at" setting.
    Read this. It might be of some help.
    http://support.apple.com/kb/HT5538

  • TS3274 My ipad has stopped responding but the screen is still on. So i cant turn it off because i cant slide the red slider because of the screen not responding. Anysolution on this problem?

    My ipad has stopped responding but the screen is still on. So i cant turn it off because i cant slide the red slider because of the screen not responding. Anysolution on this problem?

    Try a reset:
    Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

  • Macbook PRO can't find ANY Wifi network - only at home

    Hi, i have a very strange problem with my *Macbook Pro*. I have 3 apple computers at home and one pc. On all machines Wifi works fine, except my new alu Macbook Pro. Important note is, when im with my macbook on other place, office, caffe, *Wifi works fine. But when im at home, this macbook simply can't find ANY network, it's blind.* Interesting thing is, all other computers are several years old and WiFi works fine on them. My friend also bought a brand new macbook pro, and this machine also couldn't fine any network at my home, or in other case when it found networks, it couldn't connect and recieve error message "Connection timed out". I noticed there is new Wifi network in our range, is it possible that this network can cause "blindness" on new macbooks?

    *I have to say, I'm really glad you are trying to help guys.*
    Well, router is almost on default settings, SSID is brodcasted and i'm not filtering MAC adresses. I tried changed channels, diffrent types of security or no security, no luck.
    Guys, maybe i wrote it wrong, but this MacBook can't see ANY network. Around me there are 4-6 other networks which I'm able to see from other machines. So *problem is, this Macbook can't seen ANY network - not just mine.* BUT when i'm with this Macbook in office for example, or any other location, Wifi works....
    And one more important thing, this happened suddenly. I was able few months ago to find any WiFi around me with this Macbook. No changes to router, no changes to mac. Problem is somwhere in the middle...try to focus on this: why i'm not able to see any of those cca 6 networks around me. I really think it has to do something with distorted signal and Wifi card used in new macbooks. It's really sick, because all other machines works perfectly (MB 07, MBP 06, PC, iPhone 3g)
    I found a log on the router, and it's happening all the time:
    +Sunday February 28, 2010 12:52:29 Unrecognized attempt blocked from 77.49.167.124:10179 to 82.119.105.172 UDP:51413+
    +Sunday February 28, 2010 12:52:39 Unrecognized attempt blocked from 84.74.154.198:51104 to 82.119.105.172 UDP:51413+
    +Sunday February 28, 2010 12:52:41 Unrecognized attempt blocked from 85.228.116.143:30977 to 82.119.105.172 UDP:51413+
    +Sunday February 28, 2010 12:52:45 Unrecognized attempt blocked from 82.19.214.16:49713 to 82.119.105.172 UDP:51413+
    +Sunday February 28, 2010 12:52:51 Unrecognized attempt blocked from 79.5.189.206:42386 to 82.119.105.172 UDP:51413+
    +Sunday February 28, 2010 12:53:01 Unrecognized attempt blocked from 82.231.42.177:48944 to 82.119.105.172 UDP:51413+
    +Sunday February 28, 2010 12:53:03 Unrecognized attempt blocked from 150.65.37.20:35339 to 82.119.105.172 UDP:51413+
    +Sunday February 28, 2010 12:53:08 Unrecognized attempt blocked from 83.34.238.95:27314 to 82.119.105.172 TCP:38481+
    +Sunday February 28, 2010 12:53:09 Unrecognized attempt blocked from 83.34.238.95:27314 to 82.119.105.172 TCP:38481+
    +Sunday February 28, 2010 12:53:09 Unrecognized attempt blocked from 89.135.92.244:22231 to 82.119.105.172 UDP:51413+

  • TS3274 My ipad has stopped working, I cannot turn it off as the screen does not appear to be working

    Help. 
    My Ipad will not respond, the screen has stopped working and I cannot turn it off

    My ipad mini just lost screen. I tried the hold both buttons down and i did see the apple logo, but didnt fix it. i know its alive, because it beeps when i connect it to power or computer.  Are there any other fixes?  I received this as a door prizeon black friday and have no receipt?? but i did register it. what should i do?

  • TS1398 my ipad has stopped connecting ti wifi my lap top is fine so why is this happening

    My ipad 4 retina  has stooped connecting to wifi i have reset it but still wont work.my lap top is fine on the same server.what can i do to rectify this.

    Try rebooting the router.  disconnect it from power for 20 seconds and reconnect.  That may fix things.

  • IPhone 4S iOS 6.1.3 will not connect to or even find any wifi networks, any ideas?

    I updated my iPhone 4S to iOS 6.1.3 and therein started my wifi problems. At first the signal was just dropping out and I kept getting the "Unable to join..." message, which was annoying but it had periods of time where it worked fine and gave me some hope. Since yesterday my phone has not actually identified any of the available wifi signals (not just my router, but also any other networks when I've been out and about) and so I am unable to join any as I cannot even see them to select them.
    I have tried:
    - changing the channel on my router
    - turning my router off and on again
    - turning my phone off and on again
    - plugging my phone into the computer and making sure it was updated (I did this yesterday which may have made it worse as that's when the problem intensified?)
    - resetting my phone by holding down the home and power button
    - resetting the settings on my phone (numerous times)
    - changing the WPA2 settings on the router
    - checking that I have got the wifi turned on
    - setting my iPhone to "ask to join" wireless networks
    I would suspect something fishy with the router, except that my husbands iPhone is still working fine (he has not yet updated his iOS), my MacBook and his laptop are still connecting fine, as is the PS3 and the wireless printer. I went out today to a place with an open wifi network and my friend with an iPhone 4S (*not* updated to iOS 6.1.3) could see it and connect to it, but my phone didn't even pick it up and we were sitting right next to each other. There are 10 wifi networks in the vacinity of my house which my MacBook and husbands iPhone can see but my phone is now not seeing any of them. This HAS to be something on my phone, but I can't ruddy well work out what it is and meanwhile I am going to get charged loads for using up my data allowance. The only good thing so far about having all this faff is that when I updated to 6.1.3 my phone wouldn't send any photos to anyone unless it was via iMessage and since I've been changing all the settings I found one that works, so I have been able to send my mother in law some pictures of her granddaughter. My own parents will be getting upset by the lack of wifi though as I don't want to FaceTime them using my 3G.
    Any help would be most appreciated.

    Hi JimHdk,
    I have also upgraded to ios6.1.3, and facing same wifi connecting problem, after upgrade my iphone3gs is not connecting to my laptop shared wifi, which was working perfect with ios6.1.2,
    and its not an hardware error, its software error, crippy apple does not test their releases which causes problem to users.
    Updates:
    Earlier wifi connection which i was using on my Iphone 3gs, was WPA2, which was shared from my laptop via "Microsoft virtual WiFi Miniport Adapter", was working perfectly till ios6.1.2, but when i have upgraded my iphone 3gs to ios6.1.3, my iphone 3gs became unable to join wifi,
    Today I have created "adhoc network"  on my laptop using "Broadcom 4313 802.11b/g/n"(default wifi adapter of my laptop), and kept security type "WEP", and found my wifi working fine with my iphone 3gs,
    So if someone using LAN internet on their laptop, they can share their LAN internet to use on their ios devices, via creating an 'adhoc network',
    How to create an 'Adhoc Network',
    choose Security Type : WEP (compatible with ios6.1.3)
    http://www.youneedabudget.com/support/article/create-an-ad-hoc-network-in-window s
    Vinay Rajput

  • My iPhone 4 with ios7 wont find any wifi network any solution?

    I recently changed my screen and after that my iPhone stoped finding WIFI networks I tried reseting it, puting it in the freezer reseting network settings and still nothing. Any other solution you may have?

    If you had Apple replace the battery, then you can take it back to have it checked. If you opened the device yourself, then all bets are off. Cannot get help here.

  • IPhone can't find any wifi networks

    I have an original iPhone. It originally ran on wifi networks and Edge, but for a while it has only worked on Edge. When I look under settings - Wi-Fi it says "Not Connected" and lists no networks. My MacBook is connected wirelessly via an AirPort and the wireless info on it lists at least 5 active networks in the area. I have tried toggling between Airplane Mode and not, turning off everything (including cable modem and AirPort) and then resetting network settings, resetting all settings, and erasing all content and settings. I have also tried "Other" under Wi-Fi Networks, but it can't find my home network.
    Is there just something wrong with the device?

    I have the same problem you did. Was your phone still under warranty or covered under Apple Care? My phone isn't under warranty anymore, so I'm just hoping that I'm not out of luck.

Maybe you are looking for

  • Peep sounds when working from battery power

    Hello I bought a new HP DV6-1340 laptop I hear some strange peep sound from the notebook hardware when its working from battery power. When working from outlet power there is no peep sound from the hardware. Maybe its because the battery is new or so

  • F110 for Accounts receivable

    Points available. <b>Is the F110 payment only used for outgoing payments? Can it  be used to process incoming payments from customers? If yes, how do we go about setting the config? Is it similar to the config used in FBZP?</b> Thanks in advance!

  • Regarding deletion of objects under one package

    Hi All, I have an obselete Z package under which there are more than 15 objects( 10 tables, views, FM). Please suggest is there any method in which i can delete all objects in one go. Thanks, Shobhit

  • Aperture 3.3 upgrade constantly crashing

    I've opdated my Aperture from prior version to latest, 3.3 - but when the automatic upgradering of the data is running, it constantly crashes at sted 4 or 5. I get this, but don't know a) what to do about it and b) what to use this info for: Process:

  • IDSM-2 upgrade process questions.

    Hello, I started a new job and have been tasked with looking into what we can do with the IDSM-2 module we have in our 6509. The company has not been using the module so it hasn't been updating in a few years. I do not have a current license so I kno