TS3274 My ipad stopped charging 2days ago, now the battery has completely run out. when ever i plug it to charge with the mains it shows the "battery and electricity sign" then it comes off the screen again. whatdo i do
My ipad stopped charging 2days ago, now the battery has completely run out. when ever i plug it to the mains using charger provided, it just shows the, 'red batteryand electricity sign' and goes off again. I have previously tried resting and still no change. Help please.
wait for the red battery to turn green... that will take 2 mins.
once battery shows green, wait for another 8 mins to hold charge
>after 10 mins of waiting turn on iPad...
Similar Messages
-
I am in Greece and my iphone has completely blacked out. I have had it on charge in my room but nothing. screen completely blank. any ideas?
See Here for > Frozen or unresponsive iPhone
Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430
More Info here...
https://discussions.apple.com/message/19521062 -
when i turn on my itouch the screen tells me to plug into itunes, i do that and it tells me my ipod is in recovery mode and to restore it, i click ok and click restore then it does it all over again and nothing happens. what do i do?
Hi tgoit2015,
If you are having issues restoring your iPhone, you may find the following article helpful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Regards,
- Brenden -
My iphone 5s fell from my hand and went off, It refused coming up again. I always got the massage when ever i plug it on itune( iphone recorvery mode) Please what can i do?
<E-mail Edited by Host>Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data by resetting.
If this does not help, try to connect in recovery mode, explained here:
iOS: Unable to update or restore
If still no luck, you'll have to contact Apple Support to get it serviced:
iPhone - Contact Support - Apple Support -
HT4623 I updated my ipad a few days ago now it won't connect to safari and won't update any apps
I updated my ipad a few days ago now it won't connect to safari or update apps
I updated my ipad a few days ago now it won't connect to safari or update apps
-
My MacBook Pro starts with a Gray Screen and Apple Logo, a bar comes at the bottom, but after few seconds the machine shuts down. This was bought approx 1 year back. Please help!!
jayanta.ray,
which model MacBook Pro do you have (did you buy it new?), and which version of OS X is installed on it? -
Hi I am new to Apple devices, i got a new Ipad mini and i am trying to download skype from the Istore,it asks me to review my account and if i give all the details and click on next, it come to the same page,please help
Oh thank you very much, i was worried after a whole day's hard work but most important that i had lost my photos, i don't understan the photo,shared and albums? I have a lot of photos in my albums that it didn't let me delete, yet i could delete a lot of others, could you explain this to me please
-
My iPod nano will go into the sleep mode while a song is playing a second after the screen goes blank; the song will stop and I will then have to press the sleep/awake button to pick up where the song left off. How do I fix this?
Your problem is that your iPod is not sensing that your headset is inserted. There is a pin inside the headphone port on the Nano that senses if it is inserted fully. If it does not sense anything, it will pause playback to save battery power when the screen dims. Here are the solutions:
Insert it fully. This will fix it for most of you. Press that thing in there all the way. You should feel and hear a full click when it is fully seated. If you can see ANY silver of the headset jack, it is not fully inserted.
Debris inside the headset port. If you are totally unable to push the headset jack all the way, the most likely problem is that you have crud inside your headphone jack. Try blowing it out or slapping it against your palm with the headset port facing your palm to try and get the stuff out. If you look into he jack with a light, you should be able to see to the bottom. The entire inside of the headset port is white, so if it looks dark at the bottom, that is the crud that is keeping your nano from working.
Headset jack or plug issue. If you cannot solve the problem with 1 or 2, then there is likely something physically wrong with either the headset jack on your headphones or the headset port on the nano.
If none of the above works, you need to take it to the Apple store or wherever you purchased it. I think they are still under warranty.
i -
my iphone 4s is frozen on the lock screen. my lock button doesnt work and i cant slide to power off the phone. It has 100% battery and nothing happens when i plug it into the computer.
My phone screen also is in negative. It is like twitching and ive tried to invert the colors but thats not it. i cant see any apps, pictures , or anything in regular colors. PLEASE HELPPP!You can't. You'll have to wait until the battery runs out and then recharge the phone. It will restart.
Sounds like now's a good time to get the phone fixed. -
Since updating my Iphone to ios 8, my hands free in the car (Radiosat) is not working correctly. The phone pairs ok with car, and my phone is recognised but then it cuts off the radio and says that I'm in a call, I can't cancel the call or do anything. I have taken my car to my local dealer but they say the Radiosat is working ok?
Hello there stidhambr15,
I was researching the issue you are having and recommend a couple of things. First it might be a good idea to reset the device following iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting found here http://support.apple.com/kb/ht1430
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't quite get the device going again, I recommend restoring the device.
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
Might even be a good idea to turn off the phone, reseat the SIM card, and turn it back on.
iPhone and iPad: How to remove the SIM card
http://support.apple.com/kb/ht5163
iPhone 4 (GSM model)
iPhone 4S
Cheers,
Sterling -
I keep trying to download itunes in Safari but get a message that and error has happened 2/3 and check window> activity. Then it shows A sever with the specified host name could not…… and then it cuts off the rest of the message. I have reset Safari and still nothing!!!
Very frustrated!!!It's downloading with Firefox 3.6.27 as I write. It's probably more a Safari problem in your case for which people on the Safari forum could provide suggestions. Or mybe just try again in a while as I suspect everybody is downloading right now.
-
I ordered a battery for my laptop because it said to replace battery soon. How long can I let the new battery sit around as I wait for the old one to run out of more charge? Will the new one become less effective if it sits around too long?
How much capacity is remaining on your current battery?
Check your power status
From the menu: Hold OPTION and click System Information... èHardware è Power
Copy and Paste in your reply.
The new battery will become less effective if you store it in a hot or humid environment. It should be stored at room temperature (22 C).
Long term storage (6 months):
Apple recommends that you store the battery with a 50% charge. If you store a battery when it’s fully discharged, it could fall into a deep discharge state, which renders it incapable of holding any charge. Conversely, if you store it fully charged for an extended period of time, the battery may experience some loss of battery capacity, meaning it will have a shorter life.
http://www.apple.com/batteries/ -
good day please help me, my iphone 5 wont turn on. i have tried the hard reset . but that didnt even work. i plugged it in charger but still no response i connect it in itunes still.dont open. please help. i dont have the warranty anymore, so please help.me.
Please make a Genius Appointment and take it in for service. By now it probably cannot be fixed, but you never know.
-
Need some help in saving video message from viber to my Iphone 5S with new ios 8's program . I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery" thing but it doesn't save in gallery. I tried all, restarting my phone, rebooting then turning on the save automatically thing and when I watch it again, it still wouldn't save.
Probably a good question to ask Viber or look at their support site.
-
My old iPad 2 is updated to ios 7.1.2 but I have a new 4 which is only compatible with 7.0.4 from setup. How can I backup my account to the new iPad with this incompatibility?
What you need to do is temporarily set up your new 4. Just long enough to update the operating system. Then you can erase all content and settings - which puts it back to its out of box state, then set it up again, this time restoring it from the backup of your two.
So, using the same Apple ID on both - just to keep things easy - set up your 4. Just basically choose 'set up as new' to activate it, then immediately update the iOS to 7.1.2.
then erase all content and settings, which puts it back to 'llike new'...but the operating system will not reset, it'll remain 7.1.2
Then set it up again, this time choosing to 'restore from the backup' of your 2 and your 4 will be a near clone of your two.
Maybe you are looking for
-
Shell Script CONCSUB Utility Completion Status
Hi All , I'm trying to call a concurrent program from a shell script using CONCSUB utility. Is there a way to wait for the concurrent program to be completed in the shell script and get the RETCODE value which the concurrent program is returning? My
-
Mavericks doesn't work with eSATA Express Card
This is an Apiotek II 300 Express Adapter. I went out to Apiotek.com and it appears the domain is for sale. Is there any way to get a software update or do I have to buy a new Express Card that allows eSATA drives to work with Mavericks. I did a back
-
I'm trying to send an email with a large PDF document attached. The file in Finder is shown as 31 MB. When I attach it, Mail shows the file as 30 MB. Then, when I hit send, I get a message that says it couldn't be sent because the message size is
-
Network Card XP Driver Configuration
I've installed winxp home in Imac 17'', but it doesn't detect the network card. How can I install the correct drivers? Does anyone know what is the card's label so I can download the drivers.
-
My bookmark toolbar showa two line oc print, how do iI get it to show one line of print
'''bold text'''