TS3274 My ipad wont turn on. The screen is frozen with the apple icon in the middle.
It is frozen on the screen that shows when you try to turn it back on. Also, my back camera isnt working. Only the front one is working and I havent done anything to the back camera. Please help
Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should re-appear and it will hopefully reboot - you won't lose any content, it's the iPad equivalent of a reboot.
If it does boot up properly and the camera is still not working then try closing the Camera app completely and see if it works properly when you re-open the app : from the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Similar Messages
-
I tried to install the latest update on my iPhone 4s and now it seems to be frozen with an apple icon and a loading bar on the screen. I've tried turning it off, plugging it in to the wall outlet, plugging it into my computer. Nothing works. Any ideas?
connect it with the computer and let it finish or restart the process it takes a very long time
-
TS3274 My iPad wont go through the initial activation
My iPad wont go through the initial activation
In order for someone to help you, you need to provide more information. When you started to set up your new iPad, what did you see on the screen? What have you tried to do that isn't working?
-
Ipad wont turn on justablack screen
I PAD wont turn on had on charge last nite this morning nothing Help!
Have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
No data will be lost. -
TS3274 My iPad goes black in the middle of reading something!
Why does my iPad go black or to a blank screen in the middle of reading or working on something?
This happens to me all the time. It is very frustrating. I tried changing the auto lock to never, no change. I have reset the iPad, restored it to factory settings no change. I am thoroughly frustrated with the iPad and will probably switch to a different brand of tablet. I have a first gen iPad.
-
Please help
Well have you tried holding down on both buttons until the Apple Logo appears on the screen again? Hold both buttons down for about 10 seconds or so and when the Apple logo appears on the screen again, let go of the buttons.
-
My ipad wont turn on. the logo apears then it shuts down and does it again and again
My Ipad 3g when plugged in starts booting with the logo then shuts down and the logo apears again and continues. i tried power and home button but that does not work. any suggestions?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps..
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success -
Help! My ipad wont turn off and wont open a screen. Just blank with the circle going round and around. was I hacked? Should I let the battery die? I am lame at this stuff.
Have you tried holding down the power and the home buttons until the slider bar shows up to shut down the iPad?
-
What do I do if my IPad wont turn on completely and what I mean by that I see the Apple logo and I think that it is turning on and then
after a while i see the loading symbol which means that it isn't frozen and then all of a sudden it shows the apple logo once more and it repeats the aboveTry this first.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that doesn't work, try restoring the iOS software.
iTunes: Restoring iOS software - Support - Apple
If that doesn't work, try this.
iOS: Unable to update or restore - Support - Apple -
my new ipad 2 turnes to black screen with the apple icon in the middle while using it or if i just left it locked for a while, it just hanged and i have to restart it?! so why this is happening ?! is there is a productio error or something i can do to prevent doing this ?!
Appreciate responding as soon as possible.No, it's definitely not normal. Your User's Guide recommends a series of troubleshooting steps to go through when your iPad is misbehaving: As you're already in effect doing the first of the main steps, a Restart of your iPad, and that's not curing it, move on to the next .. a Reset.
To do this, press and hold both the Home and the Sleep/Wake buttons for about 10-12 seconds, until the display blanks and the red Power Off slider appears. Continue holding the buttons until the slider disappears, replaced by the black screen and white Apple logo.
This shows your iPad is starting to reboot. Release the buttons and allow the process to continue until the Lock screen appears again, then slide the slider to complete the process. -
my iphone wont turn on. the screen is just barely lit and has a greyish appearance; plus when i plug in my iphone to my macbook pro it doesnt show up in my itunes. what do i do?
http://support.apple.com/kb/ht1808
-
Ipad wont turn on? It is brand new out of the box!
ipad wont turn on? It is brand new out of the box! What should i do?
You are holding down on the sleep button at the top of the iPad in the upper right corner - and waiting until the Apple logo appears?
You could try charging the iPad as well. -
My ipad wont turn on it stops at the apple logo and i get little white wording that says this device is not using requires_boot_connect_on_reset. Not sure what is going on. also says appleBCMWLANBusInterfaceHTSIC reset chip
Try the following:
1. Reset
Hold the Sleep and Home button down until you see the Apple logo
2. Restore:
http://support.apple.com/kb/HT1414
3. Recovery:
http://support.apple.com/kb/HT1808 -
My ipod touch wont turn on, The screen is black and i tried to plug it inot my computer and it still wont turn on.. Can someone help me ?.
After charging for at least an hour I would try in order:
- Resetting the iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next try restoring the iPod via iTunes. You may have to place the iPod in recovery mode for iTunes to see the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- Making an appointment at the Genius Bar of an Apple store -
My ipod 5 wont turn on the screen will dim and then it reboots but it keeps happening again
my ipod 5 wont turn on the screen will dim and then it reboots but it keeps happening again
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
How do I use daqmx to get encoder direction/count on E-series board?
Hardware: PCI-6014 Labview 7.1 I have a linear actuator and wish to get distance/direction. The motor has a quad encoder with phase A and B only. I connected the lines according the the E-series, PFI-8 and PFI-6, and ground to digital ground. I the
-
Error when calling a web service in PLSQL, "the page could not be displayed
Hi, I have a simple web service based on a function returning the name of the employee, I tested it against the standalone oc4j instance and it's working fine, but when I try to call it from PLSQL the error "the page could not be displayed" appears.
-
Problems Calling Graphics by Forms on the Web
Hi! I'm not able to call a graphic on the web using Forms6i (Version 6.0.8.8.0 (Production)) and Graphics (Version 6.0.5.33.0). I made a call to a graphic using the RUN_PRODUCT built-in. On a client-server connection the call has no problem. On the W
-
Can´t share my photo
I tried to share photo between iPad 2 and iPhone 4 but I can´t. I have a ID Apple but doesn´t work fromn my iPad and my iPhone. For example: I can´t open www.icloud.com from both device, only I access from my Macbook Pro. I synchronize all device.
-
I CAN'T USE NOKIA MESSAGING SINCE TWO WEEKS ---- H...
I have a Nokia N900 and have used Nokia Messaging a long time (years) without any problems. But since two weeks ago it stop working, I have talked with Nokia Care about many times and they only told me to I should delete my account on my phone and r