TS3274 My screen appears to be frozen I cannot turn it to portrait can anyone help please????

My screen appears to be frozen in as much as I cannot turn to portrait screen, anyone help ????

If you see a lock icon in the upper right corner of the screen - then the screen orientation is locked.
Try the side switch above the volume rocker first and see if that unlocks the screen. If that doesn't do it, swipe up from the bottom to get to the control center. The lock icon will be in the row at the top on the right
If the screen is unlocked but still will not rotate, reset the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the button

Similar Messages

  • My MacBook pro retina display 15 inch (2013) doesn't start. After I press the start button there is only a beep sound at regular interval. The screen remains blank and the keys don,t light up. Can anyone help please?

    My MacBook pro retina display 15 inch (2013) doesn't start. After I press the start button there is only a beep sound at regular interval. The screen remains blank and the keys don,t light up. Can anyone help please?

    If your MBP is under warranty, bring it to an Apple store and have the technicians fix it.  If not, try the steps in this support article:
    http://support.apple.com/kb/ts2570
    Ciao.

  • Can anyone help please. how do i get the home button to appear on the touch screen my home button has stopped working?

    can anyone help please. how do i get the home button to appear on the touch screen my home button has stopped working?

    I have same problem.
    However, I am unable to turn on Assistive Touch.
    At one time I was able to activate it, but it went away and now I cant reactivate.
    What is the solution?

  • My itouch screen is frozen, wont slide to unlock. have done what adviced with buttons...can anyone help please?

    my itouch scrren is frozen, it wont slide to unlock..i have done all that was adviced with the buttons but that didnt work..can anyone help please?

    Force iPad into Recovery Mode
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times.

  • Can't log in with valid password, can't boot from disk, can't access disk utility, in single user mode can't reset password as appears locked in caps mode with '?' for forward slash, can anyone help?

    Can't log in with valid password, can't boot from disk, can't access disk utility, in single user mode can't reset password as appears locked in caps mode with '?' for forward slash, can anyone help?

    Which keyboard layout you were using? German, French ... I suppose your layout is reset to the default: US and you are unable to find the "?" or "/" ...
    Please have a look into the keyboard viewer, to see how the layout of your keyboard is actually.
    marek

  • I have a mac OSX desktop version 10.6.8 and all of a sudden I can't get a full screen view in Safari when I ask for help the response is use the arrows on the top right of the screen ... I don't have them  ... can anyone help?

    I have a mac OSX desktop version 10.6.8 and all of a sudden I can't get a full screen view in Safari when I ask for help the response is use the arrows on the top right of the screen ... I don't have them  ... can anyone help?

    Hi Mary,
    I don't remember those arrows in 10.6, only 10.7 & up!?
    I have 10.6.8, as you do. To make your Safari full screen, make sure you have the left hand side of your safari page moved  all the way to the left.  Then move your cursor to the BOTTOM RIGHT CORNER of the safari page, and simply drag your page towards the lower right hand corner of the screen. NOTE: you will see a series of lines on the bottom right corner of the page, indicating where to place you cursor arrow.
    By wuzradioman here...
    https://discussions.apple.com/thread/4218928?start=0&tstart=0

  • Black margins down each side of my screen, so reduced screen size, can anyone help please?

    I have 2 black margins down each side of the viewable sceen, I've tried going in to 'full screen mode' but all tha happens is that I lose my footers and headers, the screen view still remains long and narrow rather that filling the screen top to bottom and sise to side. Can anyone help please?

    I think the reason your screen looks like this is because the screen was somehow scaled differently in System Preferences. To fix this open up the System Preferences app and click on "Displays". Next click on "Scaled" and make sure it says "1280 x 800" or the top one in the list so it should look like this:
    Then that's it.
    If this doesn't work try restarting your MacBook Pro or resetting the SMC or PRAM.
    Hope this helps,
    - Daniel 

  • No audio for full screen on iTunes 11.1.1. can anyone help please?

    just updated to i tunes 11.1.1. the design was a bad enough of a surprise. but more importantly, if i try to play videos in full screen,the audio vanishes.
    can anyone help please? anyone having the same problem? cheers

    That was an issue that lots of people were having with 11.1 (including myself). I thought this update would fix that, but alas, no.
    Although I did discover that the Surround channel (if a movie has it) DOES work in full screen... just not the regular Stereo audio.

  • My iphone 4's screen has gone black, like it would if i had turned it off except i have not turned it off and it wont turn back on either. can anyone help?

    my iphone 4's screen has gone black, like it would if i had turned it off except i have'nt turned it off and i cant turn it on or anything. can anyone help?

    Try a reset. Hold down the Sleep/Wake button + Home button for around 10 seconds until the Apple logo appears.
    Let me know if this helps.
    - Greg

  • Mac book pro start up, white screen pops up and it don't process any further! Can anyone help?

    When my laptop was updating the software it was stuck on installing the updates. I held the power button then turned the laptop back on! It makes the on sound but stay on the white screen! Can anyone help?

    Hey Antonioaok,
    Welcome to the Apple Support Communities. If you are getting the white screen when you start up, there are a few steps that can be done. The first one would be resetting your NVRAM
    About NVRAM and PRAM
    http://support.apple.com/kb/HT1379
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    The next step, if it does not boot to your operating system would be to attempt to boot into safe mode. These steps are also based on the fact that your profile states you are running Snow Leopard.
    Mac OS X 10.6: Starting up in safe mode
    http://support.apple.com/kb/PH6455
    To start up in safe mode:
    Shut down your computer and wait 10 seconds.
    Press the power button.
    Immediately after you hear the startup tone, hold down the Shift key.
You should press the Shift key as soon as possible after you hear the startup tone, but not before.
    Release the Shift key when you see the gray Apple logo and progress indicator (spinning gear).
    To leave safe mode, restart the computer normally without holding down any keys during startup.
    If after that, you were still not able to get into your operating system, the last step would be trying to reinstall the operating system.
    Mac OS X 10.6: Reinstalling Mac OS X
    http://support.apple.com/kb/PH6606
    Regards,
    -Norm G.

  • PB suddenly crashes! Black screen. Wont turn back on. Can anyone HELP ???

    Hello everyone!
    My 16months old 12" PowerBook suddenly crashed last time when I was working with it. I didnt do anything particularly challenging. The PB didn't get extremely slow or anything. All of a sudden it just turned down within a second. and the display went black. By the way, it was not running on battery but over power cord.
    Then right away after crashing there was this weird high-pitched sound coming from the backside of the PB. When I tried to turn it back on the sound muted, still the PB wouldn't go back on.
    It felt as if it wast all the way shut down, and not really on either.
    I tried the key combination shiftoption+applepower button (or whatever it was) to restart it, but it didnt work.
    so I took off the power adapter cord, and took out the battery.
    After putting the battery back in i was able to turn the PB back on.
    All this happened 3 times now.
    very weird and very frightening!! Does anyone have a clue?? Can anyone help???
    PLEEEASE!!
    thanx.
    PowerBook G4   Mac OS X (10.4.4)   1.33 GHz, 512 MB, Mini-DVI

    That's not much to go on, but here are a couple of guesses that may lead you in the right direction:
    1) The high pitched noise could have been a fan dying, followed by the CPU overheating and the system shutting itself off to prevent damage. If you left it sitting for a couple of hours and it rebooted okay (or started to), and then crashed again shortly thereafter then it's probably a fan.
    2) If now the system sounds and feels like it's booting up normally, but with nothing on the screen at all, the lamp (not sure what the technical term is) for the LCD could have gone bad. This happened to me a while back. If you have an external monitor available, try plugging it in and see if the machine comes up on that display.
    Either way you're almost certainly going to want to take it in to be serviced. Best of luck!

  • I have just bought a Humax PVR and Humax W-Lan dongle to connect to my Airport Extreme. I have put the mac address into the AE. The installation screen is picking up my network name no problem but it won't connect to the internet. Can anyone help please?

    I have just bought a Humax 7500T PVR and a Humax W-Lan dongle to connect to my Airport Extreme.
    I have put the mac address into the AE. The installation screen on my TV is picking up the network name but once appied it won't connect to the internet.
    I've a few other things connected to the AE such as computers, ipad, itouch, etc, and have never had a problem connecting these once I've entered the mac address into the AE. Can anyone help me with this please?

    have you made sure that the network setting in the system preferences is set up to use dhcp? if not i would try changing it so that it shows that it is getting its address by dhcp

  • Despite it is claimed in Adobe forum that Lightroom is fully compatible with OS Maverics on my MacBook Air IT IS NOT. A message "an error occurred while attempting to change modules" appears and I cannot go any further. Can anyone help?

    Despite it is claimed in Adobe forum that Lightroom is fully compatible with OS Maverics on my MacBook Air IT IS NOT. A message "an error occurred while attempting to change modules" appears every time I try to open Lightroom. This happened immediately after upgrading to Mavericks. On my doughter's same machine Lightroom works perfectly. Can anyone help?

    Surely the Adobe forums are the place for help with Adobe applications. The fact that the problem doesn't occur on your daughter's machine suggests that it's not an issue with Mavericks but a local problem on your own machine.

  • HT201210 once again my iphone not working. i have a usb sign pointing to an itune icon on the screen. this is been on for over 24 hours. tried to restore but keeps coming up with era can anyone help please

    once again my iphone not working. i have a usb sign pointing to an itune icon on the screen. this is been on for over 24 hours. tried to restore but keeps coming up with era can anyone help please

    What is the error that is occurring?  We are not mind readers.

  • My ipod has a blank white screen. I have tried pressing home and power button at same time and a restore and its still the same. Can anyone help please

    Can anyone help me please? My ipod has a white screen that i cant get rid off. I have tried pressing home and power button at same time. I have tried a restore from itunes and its still the same. I cant even turn it off. Please someone help me.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

Maybe you are looking for

  • HP Printers - 8000 Pro and Pro 8500A Plus all in one wireless setups

    First, six weeks of customer support has not been able to get my 8500A Plus all-in-one install on my XP Pro SP3 laptop.  I've uninstalled the printer using HP's utility, the Control Panel and still can't install it wireless to this laptop. I am about

  • Creation of extra field in customer master.

    Hi All, I have a requirement where i need to create one extra field. We intend to capture taluka for each distributor. This will give us micro level detail. We can start analyzing sale at taluka level.Therefore we believe this additional field will b

  • Limit to Single Line Not Working

    I am using LV 6.0. It appears that the String Control property "Limit to Single Line" does not prevent multiple line in the string. What's up?

  • ORA-22636

    I am setting up streams between Enterprise 11.2.0.3 and Standard 11.2.0.3, using the document Oracle 2Day + Data Replication. Oracle Enterprise Manager shows the Propagation has some errors, and below is the alert log Sat Dec 15 00:05:18 2012 Propaga

  • Notification center doesnt come down in landscape mode

    I'v recently updated my ipad 2 to ios 5 and the notification center doesnt cme down when the ipad in landscape mode. And it appears to be missing the email notifications.  Can you help me?