TS3274 My volume control toggle switch reads "volume effects", I can't get volume and I have tried in my setting, need direction to revert back to volume
My volume control toggle switch is not working because it reads "sound effects", how do I revert to volume?
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
Cheers, Tom
Similar Messages
-
Strongly recommended: ios7 control center switches to user-defined, you can add the cellular and 3G switch.
You can use this Link to send your request to Apple
http://www.apple.com/feedback/ -
I have an iPad2 that has recently been updated with 7.0.4. After turning off my iPad, I lost all audio from the iPad. Speakers work because when in Setting>Sounds> the ringer options work. YES, I have tried using the volume controls. But now the volume controls only control the ringer options.
I have changed the option under settings for the lock out to mute and back to lock out.
I have reset all setting
I have turned off and on
I have done are hard reset (holding the 2 buttons down).
I have erased everything and started all over reset.
I still have now sound from my iPad. Again the speakers work, when I go to sound under setting and play with the volume of the ringer it plays the sound.
Why is my controls now only for a ringer after the UPDATE. Is my iPad2 a paper weight?Alright I have made some progress. I used compressed air and then rubbing alcohol to clean contacts. I first powered off the iPad2 and cleaned with air. Then I used the new toothbrush and rubbing alcohol to clean the contacts (really not sure how that works, but I will try anything at this point). Twice the ipad turned on when cleaning contacts.
Outcome I now get sound from typing on the ipad like the typewriter sound. I did not have that before, but still no audio from apps or youtube, or anything else. -
I am using Photoshop CS5 on a new iMac with a wireless keyboard. I used to be able to hit F11 to perform a custom sharpening action but now the F11 key is the volume control key and I have tried everything to disable or switch the volume key. I have also tried assigning other function keys to initiate the action. Is there a simple solution to this? What am I missing?
Try unmounting the volume on your iMac using Disk Utility. Then mount it again. You may need to reboot the laptop or relaunch its Finder process (using the Force Quit window) after remounting the drive on your iMac. Remember that no process may be accessing any files on the drive you plan to unmount, or the unmount will fail. Unmounting and remounting an external drive on my iMac made it become visible on my MacBook Pro after it had disappeared.
-
my Ipad 3.6 is reading with syntetic voice all the botton i select, i can't slide pages and i have to tap 2 times on the srcreentoexecute the selected botton what should i do to go back to normal
Turn off VoiceOver
1. Press the Home button
2. Tap Settings.
3. Then double-tap Settings.
4. Tap General.
5. Then double-tap General.
6. Use three fingers on the screen to scroll to Accessibility
7. Tap Accessibility.
8. Then double-tap Accessibility
9. Tap VoiceOver
10. Then double-tap VoiceOver.
11. Tap "On" next to VoiceOver
12. Then double-tap "On" to turn it off. -
I am trying to use powerpoint but when I open a document I want to work on it does not open on my desktop. It appears as open on mission control but it disappears offscreen. How can I get it to open where i need it and can work on it?
It's almost certainly too late.
The time to create a backup is before a catastrophe. After a catastrophe, it's too late. -
I've been having an issue of connecting to wifi. I have restored and set up my phone as a new one and i still can't connect. Also i have restored my network setting also. The wifi button is still grey and i cant switch it on or off.
Hi _Pchay,
Accordign to the artcle below, it looks like you have done all the troubleshooting steps and your next step may be to contact Apple Support.
iOS: Wi-Fi settings grayed out or dim
-Griff W. -
my iphone 4s has switched to the US app store and i have tried to switch back to the UK app store with itunes but it keeps saying i need to spend all of my store credit first is there any way around this
Go here:
https://expresslane.apple.com/Issues.action
Ask for assistance. -
When I try to install Itunes, I get this error: (translated from Norwegian) There was a network error while trying to read from the file: C: \ windows \ installer \ iTunes.msi I have tried many times to reinstall, but nothing helps, please help me.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
My iTunes is not showing my iPhone but my computer is reading it. How can I get iTunes to realize my phone is there to sync music onto it?
Device not detected in iTunes for Windows
-
I have an imac 2009 the disk drive is damaged and I have lost the passwords I need to reset passwords I tried booting with a macosx disk from an external hard drive but did not read the drive how else can I reset password ?
I have a 2012 mac book pro can I use that to connect with firewire and load osx that way? and how woudl I do that?
Thanks so much!To what password are you referring? Do you mean your user account's admin password? Or do you mean the master password for File Vault or do you mean a Firmware Password?
For an admin password:
Forgot Your Account Password
For Snow Leopard and earlier
Mac OS X 10.6- If you forget your administrator password
For Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu.
Enter resetpassword at the prompt and press RETURN. Follow
instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password and
OS X Lion- Apple ID can be used to reset your user account password.
If you cannot do the above then try this:
1. Boot to Safe Mode by restarting and after the chime press and hold down the COMMAND-S keys until a black screen with white type appears.
2. At the prompt, type the following commands pressing return after each command line:
/sbin/fsck -yf
If you do not receive a "Filesystem OK" message then repeat this command until
you do. If after seven tries you still do not receive a "Filesystem OK" message,
then the system is corrupted and needs to be reinstalled.
mount -uw /
cd /private/var/db/netinfo
mv local.nidb local.old
rm ../.AppleSetupDone
shutdown -r now
The second-to-last command above will cause OS X to think that the operating system is newly installed, and when the new owner starts up the computer it will send him/her to the startup wizard where he/she can start a new user without reinstalling.
This last method does not actually change a password. It simply removes the user accounts and lets you create an initial admin account as if the computer were new out of the box.
How to reset the OS X password without a startup CD:
Reboot into Single-user Mode. Enter the following and press RETURN after each command line
1. Type fsck -fy
2. Type mount -uw /
3. Type passwd <username>
I have never tried this method myself. -
I have a CS3 for windows and I switched to a mac. Can I get a mac version without having to pay for the suite again?
No.
Adobe only offers a Platform Swap on current software: Order product | Platform, language swap
CS3 is also too old to have an "upgrade path" and is no longer sold or supported by Adobe.
You do, as a CS3 owner, qualify for a 40% discount on your first year of a Creative Cloud Subscription though: Creative Cloud pricing and membership plans | Adobe Creative Cloud
If you don't want to go with the subscription service, Adobe does still offer CS6 (4 versions away from current & no longer receiving updates) as a "one time payment/download" perpetual license: Creative Suite 6 -
I have a Macbook Pro early 2011. i don't have AirPlay on my computer. How can I get it. I have read that early 2011 should have the AirPlay option. Any ideas please.
Hi All,
I need your expert advice to proceed. I bought apple TV and it works fine with my iPad and iPhones also fine with itune of my Mac Book Pro BUT I am not seeing setting which says "Airplay Mirroring" in system preference -> Display at all.
I checked my mac serial number and it shows the model as below. As far as I understood this feature should be there from 2011 onwards.
MacBook Pro (13-inch, Late 2011)
Software Mac OS X Lion 10.7.5 (11G63b)
Please suggest!!
Thanks and Regards -
The new ibook app and ibook update is designed for iPhone 5 operating system. When my iPhone4 recently updated the ibook app, it created many problems using the ibook to download and read my books. Can I get the previous ibook app back on my phone.
Check your trash can on the desktop. The old version is automatically moved to the trashcan. You should be able to move it from the trashcan back to the Apps folder within the iTunes folder. The update that was pushed out was for iBooks to work with iOS 7 not iPhone 5. iOS 7 was released today.
-
Apple iphone 4 no ringer, mute switch is off, no volume indicator on screen. tried hard restart and reconfigured via itunes, have IOs 6.1.2, no jailbreak. Can hear ringer with earphone- Have tried almost everything, buit nothing happens. Any suggestions?
My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!
Maybe you are looking for
-
How to add media in the album order?
I spent some time to organize the media in Organizer album, but when I open the album to add my media, it appears to be mixed. Is there the way to keep it in the album order?
-
Display Invoice Details in 3 pages only, as per the tags, data is overflown
Hi, I have a requirement to display invoice details in pdf output from XML Source using rtf template. The PDF output will display invoice details for One address number per page. When I execute the report in JDE standard version I get the pdf output
-
How to setup Cintiq 12wx along with dual monitors (3 displays total)
I'm considering purchasing a Wacom Cintiq 12wx. I currently run the latest LR and Photoshop CS5 with two NEC P221W monitors (which I keep color-calibrated) on Windows 7, set up with my desktop extended across both displays. They are both running at
-
How can I convert a String into boolean?
I am facing difficulty in converting String into boolean. For example, I have a few variable which i need user to input yes or no as the answer. But I uses string instead. Is there a way which i can ask them to input boolean directly? Please advise..
-
Movieclip button in movieclip?
i have put the attached code in a frame, that's in a movieclip. gotei13_thumbnail is a movieclip, that's in the same movieclip as the script. why does this not work? if i copy the script to a frame on the main timeline, and copy gotei13_thumbnail to