TS3274 red slider does not appear on ipad when i press and hold
how do i get my ipad out of recovery mode
You must restore your iPad once it is in Recovery Mode.
Backup & Restore
Recovery Mode Restore
Restore iOS
Similar Messages
-
My iPad Wi-Fi cellular 16 GB 4G switched off suddenly, even when the battery was 40% available. It is not switching on again, i have tried restarting by using sleep/wake button, but red slider does not appear. I kept it off like it was overnight, in the morning agin recharged it, but still it is not switching on. it is not responding, except when i connect the charger, it gives a blink noise that recharge has started. I removed the SIM and tried restart it but no response, What should i do to restart it please?
Seems to be working again, I haven't done anything though. And the "wifi" led on my laptop is off, which should mean that the interface is down.
This is driving me crazy I don't understand how the all thing works, if anyone has any tips that would be very nice.
Thanks! -
When trying to turn off iPad3 the red slide does not appear
When trying to turn off the ipad3 the red slide bar never appears when holding the home button down
That's because you DON'T hold the home button to power iPad down. You press and hold the power button on the upper right hand corner of the top of your iPad.
-
It is a simple thing to turn off the iphone witht the slider. But my slleep button is not working and I am not at home to take it in. I did take it to a local phone shop out of the U.S. and I was shown a different screen to customize movements that I could use and a number of other personalizations that i had never used before. He showed me how to bring up the red slider without usint the sleep button, but it was fast and I now cannot find out how he did it. It looked real easy but there are so many differnt things that one can do to adjust the phone to your own liking. Has anyone come across this before? This would be for someone who knows how to use an iPhone 3S that has been fine-until now! Thanks.
No.
As provided, you will get the exact same model, storage, color, etc -
My Ipad has a message on the screenthat indicates that the unit has not been backed up for two weeks. When I press the OK icon nothing happens. I tried to shut the unit down and the red slider does not function.
A reset should help. Tap and hold the Home button and the On/Off button at the same time for approximately 10-15 seconds, until the Apple logo reappears. When the logo reappears, release both buttons and await restart.
-
unable to restore/reset/connect to iTunes. Apple logo/low battery, slider does not appear....HELP!!!!!!!!!!!!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
my ipad 2 is "stuck" with a connect to itunes on the screen ... and itunes says it could not restore the os ... so now itunes does not recognize the ipad when connected to the pc ...i have updates all the software on the pc and disabled Norton as the troubleshoot instructions suggested; however itunes still does not recognize the ipad .... help!
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
Cheers, Tom -
Itunes store does not show on ipad when i launch app its pages are blank
itunes store does not show on ipad when i launch app its pages are blank
This indicates there might be an issue with the time configuration on the device.
Go to Settings > General > Date and time. See if Set automatically is switched to on. If so, switch to off and ensure you set date, time and time zone manually and correctly.
Power off the device (hold sleep button for four seconds, then slide to power off), then power back on.
If issue persists, switch Set automatically back to on, and if not resolved then restore the device. -
My iPhone 4s does not appear on devices when connected to iTunes in my Mac
My iPhone 4s does not appear on devices when connected to iTunes in my Mac
Check to make sure you have enough free space to include the videos.
-
My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset using the two button method, and ipod does not appear on itunes when I plug it into the computer - and nothing else happens either. This happened after I agreed to a software update which failed. How can I get it going again?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
my ipad mini does not restart when i press and hold the home and power buttons for a minute or more. what do i do? i really need to access some information on it. please help.
You need to connect to iTunes and restore.
iOS: Not responding or does not turn on
You may need to put the device into recovery mode, this is covered in the link on this page.
Did you back up the device? -
Under bookmarks the Organize bookmark option does not appear, new computer Firefox 4.0, and Windows 7, how to make it appear, thanks
"Organize Bookmarks" has been renamed to "Show All Bookmarks" in the bookmarks menu.
-
Ever since my last update I have been unable to add songs from my i tunes library onto my i phone. The "add to" button does not appear for me when I connect my i phone. Can anyone shed some light on this for me?
Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
Thanks again, Sandra2474. -
My itunes on windows7 pc does not recognize new ipad. using same cable and usb port that works for my ipod. what to do?
ThanksHave you updated iTunes with the absolute latest software? If you have not in a long time, your iPad won't be recognized.
-
When I insert a disk, a disk icon does not appear on my desktop, nothing happens and there is no option to eject. I have to restart in order to eject the disk. Any ideas on how to fix this problem?
Maybe you are looking for
-
ABAP WD, Read the source code of a html page
Hi all, I have the URL link of .jsp page and I want to get the source code generated by this page to extract some data for my web dynpro. How do i solve this? Thanks
-
U330 + Windows 7 Drivers Problem & Solutions
U330 Windows 7 Drivers http://consumersupport.lenovo.com/en/DriversDownloads/drivers_list.aspx?CategoryID=16 News Updates 11.4.09 - BIOS Release Fix Switchable Graphics and More The new bios version 67 fixes switchable graphics issues from before and
-
Tables that I need to check after the installation of OIM11G server
Hi All, I just wanted to know what are all the tables that I have to check if my database is correctly configured for OIM11G or not. I configured my design console to the server that was installed at client environment. Everything looks fine except s
-
Access to the head tag in a portal generated page
We have a situation where we need to put some javascript in the <head> tag of a page so that it can be accessed by a javascript portlet. Any ideas? -Rob
-
Western Digital Diagnostics with Vista
Hi, Does anyone know how to get the Western Digital diagnostics software for my N200 hard drive working? They don't provide a Windows Vista version and the DOS CD ISO seems to think it's really a floppy and will only run from drive A:. http://support