TS3274 went to turn on my iPad, the screen is frozen? What do I do?
I went to turn on my iPad, the screen froze, will not turn off or do anything! What do I do?
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Cheers, Tom
Similar Messages
-
When I turned on my ipad the screen is scrolling grey and white veritcal lines. I turned on the ipad and plugged it up, when I touched the button on the bottom, it flashed as if the screen was coming up, but instead it scrolled grey and white lines, halfway across the screen and has been doing so for about an hour now. How can I fix this? I need it for school. Am I going to have to send it back? And if so, will they send me a replacement while I am waiting for mines to be fixed?
Janellie_love-
You might connect the iPad to its wall charger for half an hour, to be sure there is enough juice to get started.
That sounds like an internal problem, as you suspect. If you can show it to an Apple Store Genius, you may get a replacement on the spot.
If there is no Apple Store near you, look for an Apple Authorized Repair Center. There may be one in your city. I do not know how long it would take, or if a "loaner" would be available. Whether they can fix it on site would depend on what the problem is. <Apple Authorized Repair Centers>
One thing you can try is to reset (reboot) the iPad. Hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. If it works, the iPad will restart after a couple of minutes. Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
Fred -
My ipad 2 16GB says not enough memory and the screen is frozen, what happened and what can I do?
My ipad 2 16GB says your device does not have enough memory to support this function and the screen is frozen, what happened and what can I do?
Try a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Also, See Here > 'Not enough free space' alert when trying to sync
If no joy... Try a Restore...
1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode -
I cannot turn my ipad on or off it just keeps spinning.
Try a reset. Hold the Sleep and Home button down (together) for about 10 seconds until you see the Apple logo. Ignore the red slider.
-
I turned off my iPad, but when I went to turn it back on, the apple logo just stays there. It's been there for 10 minutes, and hasn't gone away. Help please.
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
-
When I turn my iPad the screen doesn't turn?
When I turn my iPad the screen doesn't turn- please help?
On the top (near the battery indicator) do you see a little circle with a padlock in the middle? If so, there's a slide switch by the volume toggles. flip that switch and see if it restores the accelerometer
-
Ipad mini screen is frozen. Message says Not Enough Storage. Cannot be backed up ect. problem is I can not enter settings to manage storage or even turn the device off. the screen is frozen and will not allow me to do anything. Anyone got any ideas?
OMG!! Thank you, Thank you, Thank you! I did what you suggested and it worked! I know nothing about this stuff. You made my day!
-
When I turn on my iPad the grey 'brightness slider' is in the centre of the screen and I can't get rid of it. I've tried switching on / off 'auto-brightness' in 'settings' but it won't go away. What am I doing wrong? Any advice gratefully received.
That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
Put your install DVD into the optical drive (CD/DVD drive) and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead. -
I went to use my iPhone 5 (I had used it just minutes before) and it wouldn't work. It was about half charged and seems to have shut itself off. I tried charging it and turning it on but the screen remains completely black. What happened?
Try resetting. Hold the sleep wake button (on the top edge), and the home button (round button on the front with the white square) at the same time for 10-15 seconds. If you see the apple logo, let go. Your phone should restart. If not?
Make a Genius Bar Reservation (or cancel an existing reservation)
http://www.apple.com/retail/geniusbar/
Sign in using your Apple ID -
I am having trouble with my ipad. When I turn it on the message that I have not backed up my iphone appears on the screen. I cannot get rid of it or acces anything. The screen is frozen. I cannot even turn it off.
Hello Juno2162,
Thank you for providing the details of the issue you are experiencing with your iPad. I recommend following steps in the tutorial below to address an issue like this. I think the step to reset your iPad may be particularly useful in this scenario:
To reset iPad, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.
You can find the full tutorial here:
Frozen or unresponsive iPad
https://www.apple.com/support/ipad/assistant/ipad/
Thank you for using Apple Support Communities.
Best,
Sheila M. -
When I am using my IPad, the screen will get dim and I need to tap the screen to get it to brighten up again. This happens repeatedly while I am using it. Is there something I can do to stop that from happening?
You don't necessarily need to set it to never...being set that way, you'll risk depleting the battery in case you forget to lock the screen.
Instead, use a value greater than your previous 2 minute setting...see which time setting would work for you. The settings are:
2 Minutes
5 Minutes
10 Minutes
15 Minutes
Never -
I went into a web page I must have left My Ipad in the web sight when I went to use it again the screen seems frozen. Anything I do I can't get a response. Please help
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
-
my iphone 4 screen has gone blank and its still on it vibrates when i put it on charge ive tried turning it off and the screen is still not showing anything please help
Hi Ellen,
Welcome to Apple Support Communities.
It sounds like your iPhone 4 has a dim or blank black screen but responds to some commands like enabling vibrate. I understand this may be a frustrating situation, but the troubleshooting suggestions in the article below will help you solve the issue.
Get help with the screen on your iPhone, iPad, or iPod touch - Apple Support
If your screen is too dim, too bright, or you see only faint images
Try to adjust the brightness. If the screen doesn’t respond when you adjust the brightness, open several apps to make sure it’s not an issue with only one app.
If you have a screen protector, try removing it. Try removing your case if it includes a screen protector.
If you see the issue in multiple apps, restart your device.
If restarting doesn’t fix the issue, restore your device.
If you still see the issue after you restore, contact Apple Support.
Take care,
-Jason -
When using my ipad air it keeps coming off the page I'm on or app I am using and going back to the home screen. Also when using my ipad the screen will go white with a black apple icon in the middle for about 20 seconds then it makes a ping sound and goes to the home screen. Could anyone help please. Thank you :-)
Read here:
http://help.apple.com/ipad/8/#/iPad9a245e3e -
my iphone 5 screen has gone black in the middle of updating a app. i have tried to back it up using itunes and restore it however it will not restore my phone as i have got the app find my iphone switched on. i cannot turn it off as the screen is black. can anyone help me please??
christobell86 wrote:
... it will not restore my phone as i have got the app find my iphone switched on.
You can access iCloud.com on a computer to turn it off.
http://support.apple.com/kb/PH2702
Maybe you are looking for
-
How To Add Job Options In a .PS File
Acrobat Distiller 5.5 and 7.0 Greetings, I currently automate making a single combine PDF based on runfilex.ps. I cannot figure out the snytax to specify the job options file ( fdi.joboptions ) to the following .ps file /prun { /mysave save def
-
Why does working with Stamps cause Acrobat Pro XI to crash on close
Although other people in my organization have been experiencing crashes several times a day with Acrobat Pro XI (usually from stamping PDFs and closing Acrobat), I've just started receiving crashes after working on custom Stamps. This hasn't happened
-
Getting the name of the executing method
Hello, I'm looking for a way to get, in one method, an String with its name. For example, if the method's name is "testOne", I'm looking for getting a String with the name "testOne" in a sentence of the method. Is there any way? Thx
-
HI, EVERYONE; I AM NEW DEVELOPER, SO PLZ HELP ME. I WANT TO KNOW "HOW TO PUT THE HORIZONTAL TOOLBAR AT THE BOTTOM OF A FORM?" OR "HOW TO MOVE THE VERTICAL TOOLBAR LEFT OR RIGHT ON FORM?" IF ANYONE KNOWS THEN PLZ HELP ME. I WILL BE VERY GREATFULL. YOG
-
Problem passing parameter from one interactive report to another
Hi. I'm going slightly mad over this simple problem. Apex 4.0.2 installed. Created one interactive report with 4 columns, one is linked to a custom target which is another interactive report where the column is used in the WHERE clause through a hidd