TS3274 Zynga Poker and Bejewelled Blitz stopped working on my IPAD...I've tried everything,
These Apps both work fine on my laptop through Facebook, but they have both stopped working on my IPad 2..I have shut down my IPAD, deleted both apps and re-installed, made sure my software was up to date, increased my storage, and they still won't open.
Any help out there would be appreciated!
Thanks!
It sounds like an issue I had a few years ago where apps wouldn't recognize being attached to my AppleID. To solve the problem I needed to do a restore on my device.
Start by backing up the iPad and doing a restore. If that doesn't fix the issue you may have to do a restore and then setup as a new device. The apps will once again work, but you may lose all of your progress to date.
Similar Messages
-
I have a WiFi home connection. It works on my laptop but has stopped working on my iPad, which I tried resetting but it didn't help. It recognises the SSID but then asks for IP Address, Subnet Mask, Router etc. Any ideas on what to do?.
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings -
i've tried playing zuma blitz and bejeweled blitz in the firefox browser window and the play is very jerky and slow.
Just had the same thing happen AGAIN. Suddenly - a blank iPlayer Desktop which failed to download new programmes. All previous programmes were still in the repository folder. This time the sequence I outlined previously didn't work.
What eventually got things working this time was to reinstall Adobe Air as part of the BBC iPlayer Desktop installation process - and not separately.
So:
a) Move iPlayer to trash.
b) Find and delete the following folder: Users/Yourname/Library/Preferences/BBCiPlayerDesktop.61DB7A798358575D6A969CCD73DDBBD 723A6DA9D.1
c) Find and delete the following folder:
Users/Yourname/Library/Application Support/Adobe/AIR/ELS/BBCiPlayerDesktop.61DB7A798358575D6A969CCD73DDB BD723A6DA9D.1
d) Find and delete the following folder:
Users/Yourname/Movies/BBC iPlayer/repository/cache
e) Find and run: Applications/Utilities/Adobe AIR Uninstaller
f) Empty the Trash. I found that bits and pieces of BBC iPlayer were still running despite having been quit and dumped in the trash - and so it wouldn't allow me to complete this part. Restarted the computer, then empty the trash.
g) Find the folder: Users/Yourname/Movies/BBC iPlayer/repository and rename it repository2
h) Reinstall iPlayer. It will tell you that you have no programmes to view. Quit the programme.
i) Find and delete the folder: Users/Yourname/Movies/BBC iPlayer/repository
j) Find the folder: Users/Yourname/Movies/BBC iPlayer/repository2 and rename it to repository.
k) Relaunch iPlayer
It would be terribly nice if the BBC or Adobe stopped buggering about with this . . . -
User sip folder have manu Mailitem&username&.cache files until folder is full and Lync client stops working.
Hi,
You can try to change the Lync Profile name. After you do it, Lync will create a new Profile. The Lync Profile path is following:
%UserProfile%\AppData\Local\Microsoft\Office\15.0\Lync
If the issue persists, please repair Office 2013 and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
I clicked on a bad link, and my safari stopped working,
hi guys I clicked on a bad link, and my safari stopped working,
when I click on safari, appears a phrase,
( SAFARI QUIT UNEXPECTEDLY )
CLICK REOPEN TO OPEN THE APPLICATION AGAIN, THIS REPORT WILL BE SENT TO APPLE AUTOMATICALLY..
when I press the ok or reopen, the screen is frozen and Safari does not open.
please can anyone help me please? thanks....Malware or adware may be the culprit.
If you have a backup browser installed, download and run the AdMedic adware / malware removal tool here > AdwareMedic
Easy and only takes a minute or two.
If you can't download AdwareMedic, follow the instructions here > Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support -
Hello
My system version 10.5.8
I have installed Safari update - 5.0.6 and the browser stopped working. At openingit shows the following icon:
"Safari has suddenly finished working. Possible problem is in the action of the plugin "TastyAppsAVPlugin".
After deleting all plugins from the folder "Internet Plugin", Safari worked again no problem, BUT all sites with flash content (e.g.YouTube) did not work.
I then tried the following experimental steps:
a) Moved all plugins from the folder "Internet Plugin" into a temporary folder.
b) Downloaded and istalled Adobe Flash Player version 10.3.181.34
c) Started Safari and it did not work ( same message"TastyAppsAVPlugin")
d) Deleted Adobe Flash Player from the folder "Internet Plugin". Safari worked.
e) Moved back all plugins, except Adobe Flash Player, from the temporary folder to "Internet Plugin" folder. Safari works... But Flash won't work!!! Before update to Safari 5.0.6 , ev erything worked perfectly well.
Guys, please solve the problem
Regards
Ruslan Reed
[email protected]MayaMa --
There are many threads on this. I typed "Uninstalling TastyApps" in the Google search, and came up with these:
http://www.google.com/search?client=safari&rls=en&q=Uninstalling+tastyapps&ie=UT F-8&oe=UTF-8
I do not know which of the many TastyApps haxies you have. Perhaps it would be better to contact them directly, once you know which of their products you have. -
HP Pavilion dm1-4000au Entertainment Notebook PC_Keyboard and Touchpad Suddenly Stops Working
Hi there,
I have an HP Pavilion dm1-4000au Entertainment Notebook PC (QG411PA) running Windows 7 Ultimate 32-bit for more than a couple of years already. During those times up until now, whenever my laptop is on standby for an hour or so, its keyboard and touchpad suddenly stops working, regardless if its running on battery or on AC power.
I always ensure that I have an external mouse in order for me to navigate properly and pull up the on-screen keyboard in order to type once that issue arises.
All appears to be updated in terms of Windows Updates and I even reformatted it, but issue still persists.
Is this particular issue that I am experiencing a harware issue? Perhaps a software issue? Or maybe a defective model itself?
Your prompt response is highly appreciated.
Sincerely,
Led
This question was solved.
View Solution.Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
It looks like you are facing difficulties to resolve Touchpad Issues with your Notebook
We will surely assist you with this
Steps to drain the Static charge and loading default BIOS settings to resolve the issue
Step 01. Turn OFF the Notebook
Step 02. Un-plug the Power/AC Adapter and also remove the Battery too
Step 03. Press and Hold the Power Button of the Notebook for a full minute
Step 04. Now let's re-insert the battery back in and plug back the Power/AC Adapter
Step 05. Start the Notebook and keep tapping F10 Key during the startup to access the BIOS
Step 06. Once you get to the BIOS, Please press F5 or F9 Key to load setup defaults for the BIOS
Step 07. Now let's press Esc/Escape Key. Save Changes and Exit - Yes
Step 08. Now please wait till the Unit loads the Windows Operating system
Now please download and re-install the touchpad drivers for your Notebook from the HP Support Site
Please Click this Link to find more troubleshooting steps to resolve this issue
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP -
I can edit on Premiere Pro 6 files, but after a dozen keystrokes, the space bar and cursor keys stop working while the save function, render workspace function, export file are still operational. How can I fix it so I may complete my assignment?
Besides DaVinci Resolve, Adobe Creative Suite 6 is the only software on the machine. I am using Windows 7 Professional 64-bit Operating System on AMD FX 6100 six-Core Processor at 3.31gHz and 32 GB RAM memory. There are two SLI-bridged GTX680 NVidia cards.
The software was very stable for the last six months, working with 720P proxy files from 2.5K masters (Blackmagic Design Camera). I am working on a feature-length project that exceeds 1000 edits. I have broken the file into 2 one hour segments.
I have deactivated the software before reinstalling the entire OS from scratch. PP6 was very stable for 48 hours. Then the freezing space bar returns. After a dozen strokes into the project, same problem. I have made cache files store next to originals, I have deleted preview files if they were corrupted and causing instability. Am I missing something?
I have Microsoft Security Essentials for virus protection. I double checked the memory for damage/defect. Nothing says that the motherboard or other components are damaged.
I am in film competition overseas and need to have deliverables in less than a month's time. I lost the last two weeks troubleshooting and this crisis came at an inopportune moment of the project.
Any assistance would be greatly appreciated.Still getting software freezes but found a way to mitigate for the mean time.
Upon launching Adobe Premiere Pro, hit CTRL-ALT-DEL to launch TaskManager as well.
You will want to highlight Adobe QT32 Server.exe
Right click and select "End Process Tree"
You will get considerable stability in the program, long enough to get timing of cuts done. Be sure to save often.
If the program freezes, do not hit Save. You definitely want to avoid saving the corruption into your TimeLine
CTRL-ALT-DEL to relaunch the TaskManager and highlight Adobe Premiere Pro.exe
Right-click to "End Process"
No need to reboot the whole system; just launch Premiere Pro again and continue with the session. Note that your work reverted to Last Save.
Hope this helps until the bug is fixed. -
I am currently deployed and was using my iMessage to be able to talk to family back in the states and my iMessage stopped working. It will no longer select my number to use as the send/receive. How do I fix this so I can continue to talk to family?
Read here:
http://support.apple.com/kb/TS2755 -
I have hp laptop dv9009us one day all the USB ports and webcam camera stopped working
I have hp laptop dv9009us one day all the USB ports and webcam camera stopped working, I had windows XP and tried all solutions posted on online forums didn’t work, I upgraded to windows 7 and still not working, please note that the USB is detected in device manger and it says working properly but he webcam is not detected at all, also when I connect any device to USB it gives it power and I even can charge my cell phone but it doesn’t detect any device. Is there any genius out there that can help me?
Also after I installed windows 7 I went o system information----software environment--- system drivers, and I found all USB drivers stopped by the way this was the case in windows XP as well
usbccgp Microsoft USB Generic Parent Driver c:\windows\system32\drivers\usbccgp.sys Kernel Driver No Manual Stopped OK Normal No No
usbcir eHome Infrared Receiver (USBCIR) c:\windows\system32\drivers\usbcir.sys Kernel Driver No Manual Stopped OK Normal No No
usbehci Microsoft USB 2.0 Enhanced Host Controller Miniport Driver c:\windows\system32\drivers\usbehci.sys Kernel Driver No Manual Stopped OK Normal No No
usbfilter AMD USB Filter Driver c:\windows\system32\drivers\usbfilter.sys Kernel Driver No Manual Stopped OK Normal No No
usbfltr Razer Copperhead Driver c:\windows\system32\drivers\copperhd.sys Kernel Driver No Manual Stopped OK Ignore No No
usbhub Microsoft USB Standard Hub Driver c:\windows\system32\drivers\usbhub.sys Kernel Driver No Manual Stopped OK Normal No No
usbohci Microsoft USB Open Host Controller Miniport Driver c:\windows\system32\drivers\usbohci.sys Kernel Driver No Manual Stopped OK Normal No No
usbprint Microsoft USB PRINTER Class c:\windows\system32\drivers\usbprint.sys Kernel Driver No Manual Stopped OK Normal No No
usbstor USB Mass Storage Driver c:\windows\system32\drivers\usbstor.sys Kernel Driver No Manual Stopped OK Normal No No
usbuhci Microsoft USB Universal Host Controller Miniport Driver c:\windows\system32\drivers\usbuhci.sys Kernel Driver No Manual Stopped OK Normal No No
uwbusb UWB Bus Control USB-Miniport Driver c:\windows\system32\drivers\usbuwbmini.sys Kernel Driver No Manual Stopped OK Normal No NoDid you ever get this resolved? I am having the same problem and have tried just about everything for my dv9000.
-
My Iphone4 Home button sometimes work nicely and sometimes it stop working. India Apple care says they cant give me even paid support because i bought phone from Australia. i don't know what to do. i m disappointed with the product and service support
When you buy an iPhone in the U.S. it's locked to that country with the carrier you bought it for.
If you bought the device unlocked in the U.S. it's unlocked, you can use it on any carrier. Even one's outside the country.
If you want to do a repair on a device you bought in the U.S. and your using it in another country, you must send it back to the U.S. Why? That's where you bought it from.
AppleCare Protection Plans and AppleCare Limited Warranties are registered to your hardware.
Your hardware is your iPhone.
Wherever hardware that was bought then that's the country it was designed to be used in and that's where it was manufactured.
Apple is very localized - if you call U.S. tech support, you'll speak to somone in your country.
So, what does all this mean?
In order to do a repair, you need to send it back to the country you got it from.
And we're all customers like you. We understand that you're upset, but Apple isn't gonna bend the rules to one individual.
Policy is policy. Get over it. -
Hi I have an iPhone 4 and suddenly it stopped working. Could here notifications and nothing on the diisplay. Wake up button on top is not working. so unable to restart the phone. Wanted to try restore from iTunes but Find my iPhone (iCloud) is on. How to recover or restart my Phone
Follow these steps to log into your iCloud account on your computer and deactivate "Find my iPhone" on your device:
Remove an iOS device or Mac on which you can’t turn off Find My iPhone
If you can’t turn off Find My iPhone on the device, turn off the device so it goes offline, then remove it from Find My iPhone on iCloud.com.
Note: You can also remove your iOS device by first erasing it—just follow the instructions below for removing an iOS device you don’t have. You can later restore the device from an iCloud or iTunes backup.
Turn off the device you want to remove.
Sign in to icloud.com/#find on another computer with your Apple ID (the one you use with iCloud). If you’re using another iCloud app, click the app’s name at the top of the iCloud.com window, then click Find My iPhone.
Click All Devices, select the offline device, then click Remove from Account. If you don’t see Remove from Account, click All Devices again, then click the Delete button next to the device. If the device comes online again, it will reappear in Find My iPhone. If your device reappears, turn off Find My iPhone on the device (follow the instructions above for removing a device by turning off Find My iPhone), or if it’s an iOS device and you no longer have it, follow the instructions below for removing an iOS device you no longer have.
Remove an iOS device you no longer have
If you no longer have the iOS device because you gave it away or sold it, you need to remotely erase it before you can remove it.
Sign in to icloud.com/#find with your Apple ID (the one you use with iCloud). If you’re using another iCloud app, click the app’s name at the top of the iCloud.com window, then click Find My iPhone.
Click All Devices, then select the device.
Click Erase [device], then enter your Apple ID password. Because the device isn’t lost, don’t enter a phone number or message.
Note: If you’re trying to erase a family member’s device, that person will need to enter his or her Apple ID password on this device. If the device is offline, the remote erase begins the next time it’s online. You’ll receive an email when the device is erased.
When the device is erased, click Remove from Account.All your content is erased, and someone else can now activate the device.
copied from: iCloud: Remove your device from Find My iPhone -
Help....
Updated to 10.6.8 and HP F2100 and D2400 Printers stopped working.
Restored 10.6.7 and printers from Install CD's but not working.
Same with F2100 scanner
Am I glad I kept Windows desktop as without it I would be scre**ed now
What is going on with this latest update as its like a return to Windows with things crashing or hanging up every few minutes????
On a MacBook Air that has not been updated everything still works so what has 10.6.8 done and why won't the restore to 10.6.7 work?
SteveNone of those things you mentioned were what I suggested.
I'm guessing the "ctrl click in printer preferences" means you Reset the Printing System?
If so, that is what I would have suggested if deleting it by selecting the ( - ) button and then adding it with the ( + ) button.
But, if HP has a fix, it likely needs to update its drivers. -
HEllo my iMessage and FaceTime suddenly stopped working and it won't let me verify my apple ID why is this?
likely an Apple problem
http://www.apple.com/support/systemstatus/ -
FaceTime and iMessages have stopped working since i updated to 7.0.3, saying there is a network error and to try again later. Have tried reinstalling Find my iPhone to see if it works. It doesn't for me. The message says "FaceTime (iMessage) Activation: Could not sign in. Please check your network connection and try again". My network is perfectly alright as I keep buying on the App Store. can u please help out???
(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset.
Maybe you are looking for
-
How to separate internaltable values
how to separete internal table fields i have a internal table t_table with some fields , I want to separate the values in the internal table by using semicolon and pass to a string type field i need something like this 800;1000;100000456;2009;001;D.
-
Weblogic server installation - multiple instances in different ports
Hi I want to install weblogic server(10.0) in my system but it should have three instances running on different ports(equivalent to 3 servers running on the same host). The application hosted on one server will be interacting with the applications ho
-
Intente poner mi numero de serie de mi ipod pero decia que ya habia sido registrado
el caso es que me robaron mi ipod e intente registrar el dispositivo como mio a travez del numero de serie pero cuando lo introduje me decia que otro usuario ya lo habia puesto antes ¿Qué puedo hacer ?
-
PowerPC apps are no longer supported.
I updated my Macbook Pro to Lion 10.7.4 and now Photoshop CS won't open because PowerPC apps are no longer supported. Any ideas? Free ones preferably
-
Approval for Delivery Document
Hi Experts, My question is related to Delivery Document that how can we amend the Delivery document again, because they compare the Packing list PLDS.(Right Click to find the Packing list).So there is any solution for that.In Simple word they want t