TS3276 attachments are being stripped
Recently attachments are being stripped from incoming email messages. If I open the same message on my Blackberry PlayBook all the attachments are there. I have even had the sender resend the email and the same attachments come through fine on the second attempt. Nothing about the account or mail settings have changed that I'm aware of and the problem seems very random.
My wife texted me this morning and said my texts to her Blackberry are coming up with weird looking text and it has 15 attachments added to it. So weird because it's a brand new text message (not carried over from a previous one) and I've never sent an attachment before by text to anyone in the past from my iphone.
I did turn the MMS off after she told me about this, not sure what was sent in terms of an attachment as she cannot open them up.
Similar Messages
-
URLs (ports) are being stripped by 10gAS?
Hi,
We are having a problem with a 10gAS installation. In general most everything is working, but it looks like in some cases, when we connect to it using a URL that ends without an ending slash ("/"), OAS is redirecting the browser to a different URL with an ending slash. The problem is that the redirect URL is missing the port.
For example, if I point my browser to http://<host>:7777/oiddas (URL with no ending slash), OAS is sending a 301/redirect to http://<host>/oiddas/ (URL with ending slash, but with port missing). From what we can tell, it looks like OAS is trying to redirect the browser to port 80.
The "oiddas" is where we mainly encountered the problem, but there may be others.
I've been researching this problem, but haven't had any success. The only thing that I've found that's close is is to set the "ServerName" in the Apache httpd.conf to the fully-qualifed domain name (apparently, Apache uses this to build the URL for redirect). However, I checked, and "ServerName" is set to the FQDN in our httpd.conf, so that doesn't seem to be the problem.
Has anyone else run across this problem before? If so, any suggestions as to how to fix the problem?
Thanks,
JimHi,
Comments interspersed...
We are having a problem with a 10gAS installation.
Which 10g version? And platform?I'll check tomorrow re. version. This is actually an Ebusiness 11i installation, with the infrastructure running under 10gAS (per Metalink article). Platform is Solaris 9 SPARC.
The problem is that the redirect URL is missing the port.
How did you find that out?When we use IE, if we go to http://<host>:7777/oiddas, we get a "no server or DNS" error, and the address bar shows http://<host>/oiddas.
Similar thing happens with Netscape 7, if we go to http://<host>:7777/oiddas, we get a popup saying "connection refused by <host>" (i.e., not by <host>:7777).
Did you look around in the installActions.log? E.g. for the config tools parameters
# grep apacheport= installActions<datetime of infra install>.logI will pass the above along to the person who did the installation, or check on it myself, but FYI, the Listen and Port directives in the infrastructure Apache httpd.conf is set to 7777. Is a port setting stored somewhere in the configs other than that?
Does SSO login work? http://<host>:7777/pls/orasso
Yes, I think that part works.
Jim -
Mail attachments - Attachments are being renamed to "Mail Attachment"
I have MacBook Air and am using the Apple Mail client to connect via IMAP to our company Exchange 2003 server. When I receive an email with an attachment(PDF, DOC, XLS, JPG) every attachment gets renamed to Mail Attachment (With no extension at the end). When I try to open the attachment the MAC OS doesn't understant how to open, even when I download the attachment it appears as Mail Attachment -##.
I'm running Version 10.8.4
Please help!try the following command: Mailbox menu / Rebuild
please note, Mail.app is unable to display attachments file accented characters in filename properly,
and the filename becomes garbage. Apple knows about this BUG for at least 5 years, without providing a fix.
https://discussions.apple.com/message/7195409#7195409
https://discussions.apple.com/thread/1409364?start=60&tstart=0 -
Whenever I send an attachment from my iCloud email, the recipient, who is not an iCloud user, receives it renamed as "attachment" or "att..." Can this be solved somehow?
Whenever I send an attachment from my iCloud email, the recipient, who is not an iCloud user, receives it renamed as "attachment" or "att..." Can this be solved somehow?
-
I updated my account and now emails with photo attachments are being blocked
On Sunday I received something from y'all asking me to update and I did.
Now when I go to, say, Google, there is a little green icon besidethe word saying that y'all have checked it and it is safe.
More critical. my friend has tried to send photos to me every day since Sunday and they keep getting kicked back. Her inbox has been bombarded with messages that says I didn't ask for anything from her and that I am not accepting her emailPlease restart the computer and try again.
-
Web links (URLs) are being parsed in the conversation feed - disable this?
I noticed that some of recent updates in skype for mac started to be too clever with links I post in conversations - it tries to fetch the content, parse it and present some small excerpt if it in the conversation. But I mostly message links to closed sites - like Google Docs or internal knowledge base - and they require logging in. So, I know mostly see in my conversations with collegues something like this. How can I disable this behavior? I want to see plain links, I do not need this supersmart parsing.
Well, I want to see IMAGES in the chat (i.e. someone transmits actual image data), but I don't want to see WEB PREVIEWS (previews of web pages, or the picture an image URL points to) in the chat. Data is data, and a link is a link. Data should be displayed, and links should remain links. If someone wants me to see a web page, they should make a screen grab to their local computer, and then send me the picture as an image. Otherwise they should send me a link, which then I can peruse at my own convenience (which usually includes first scrubbing the link of any identifying trailing garbage.)
As a matter of fact, I don't want Microsoft/Skype to PARSE ANYTHING that I transmit.
Just as automatic loading of remote images in HTML e-mail messages constitutes a major security risk and privacy breach, so does this web preview function.
I have absolutely no intention to disclose who I'm conversing with and what we talk about, but if someone sends me a link that hasn't been properly "cleaned up", then the site will know who sent me the link, who received it, what the conversation might have been about etc. and that information is sent without my consent.
I have ZERO tolerance for Microsoft's lack of sensitivity to privacy, and where we users are being stripped naked to prying eyes, all in the guise of some "neat features".
I don't need no "neat features". If you want web links to work the way they are supposed to work on the Mac, then allow for a right-click with a QuickLook option, but display the link in it's full length with all the "garbage" that will be transmitted to the site when the link is clicked upon, no "user friendly URL" version, that makes a link look like it were a harmless, state-free static link, while in fact it's a 900 character long monster with encoded state and personal details. One might think that's part of the PRISM program... -
Web links (URLs) are being parsed in the conversat...
I noticed that some of recent updates in skype for mac started to be too clever with links I post in conversations - it tries to fetch the content, parse it and present some small excerpt if it in the conversation.
But I mostly message links to closed sites - like Google Docs or internal knowledge base - and they require logging in. So, I know mostly see in my conversations with collegues something like this.
How can I disable this behavior? I want to see plain links, I do not need this supersmart parsing.Well, I want to see IMAGES in the chat (i.e. someone transmits actual image data), but I don't want to see WEB PREVIEWS (previews of web pages, or the picture an image URL points to) in the chat. Data is data, and a link is a link. Data should be displayed, and links should remain links. If someone wants me to see a web page, they should make a screen grab to their local computer, and then send me the picture as an image. Otherwise they should send me a link, which then I can peruse at my own convenience (which usually includes first scrubbing the link of any identifying trailing garbage.)
As a matter of fact, I don't want Microsoft/Skype to PARSE ANYTHING that I transmit.
Just as automatic loading of remote images in HTML e-mail messages constitutes a major security risk and privacy breach, so does this web preview function.
I have absolutely no intention to disclose who I'm conversing with and what we talk about, but if someone sends me a link that hasn't been properly "cleaned up", then the site will know who sent me the link, who received it, what the conversation might have been about etc. and that information is sent without my consent.
I have ZERO tolerance for Microsoft's lack of sensitivity to privacy, and where we users are being stripped naked to prying eyes, all in the guise of some "neat features".
I don't need no "neat features". If you want web links to work the way they are supposed to work on the Mac, then allow for a right-click with a QuickLook option, but display the link in it's full length with all the "garbage" that will be transmitted to the site when the link is clicked upon, no "user friendly URL" version, that makes a link look like it were a harmless, state-free static link, while in fact it's a 900 character long monster with encoded state and personal details.
One might think that's part of the PRISM program... -
So I upgraded to Excel 2008 only to discover that it is stripping all the hyperlinks out of any of my work spreadsheets that I open.
So, I went over to Numbers and opened the same spreadsheet. The first two columns of this spreadsheet are lists of numbers, all hyperlinked to a web page. Well, in Numbers the first cell's hyperlink is still there, but all the rest have been stripped!
There's nothing complicated about this spreadsheet, its simply 7 columns of info, the first two columns being numbers that have hyperlinks to web pages. Thats it, wasn't created with any macro's or anything. My IS guy created them in perl using Spreadsheet::WriteExcel, using the write_url() function, and everything looks fine in his copy of excel 2k8 or my copy of Excel 2004.
I really don't want to have to keep using Excel 2004 if I don't have to. Since MS was stupid enough to break their own software and these spreadsheets seem to TRY to open correctly in Numbers, does anyone have any idea why the hyperlinks are being stripped out so I can at least use this?Hello
In a not so old thread (02/13) I passed a list of Numbers error messages related to exchanges with XL.
http://discussions.apple.com/thread.jspa?messageID=6587857
You may copy them in a doc for future ref
Some of these messages are related to hyperlinks.
Here they are.
+Couldn’t export hyperlinks outside table cells+
+Hyperlinks in cells that don’t contain text weren’t imported.+
+Hyperlinks on shapes aren’t supported and were removed.+
+Hyperlinks within workbooks and hyperlinks to other files aren’t supported and were removed.+
Maybe they explain what you get.
Yvan KOENIG (from FRANCE mercredi 19 mars 2008 18:14:31) -
Having issue with sending jpeg attachments. Acknowledging that all my email/internet providers are functional and the usual parameters have been checked I currently have the following concern. When attaching, in any fashion, via all methods, jpeg files of 6GB+ they are being sent and received as 70KB+/- attachments? Have a I missed some simple setting or is this a function of iPhoto. I can send the same full size jpeg attacments via Windows based laptops usuing same services, same location; and have had no previous issue using a previous Windows PC.
Appreciate any input.
OatserI can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport -
I recently built a new computer running Win 8.1. However, I have had trouble sending and receiving attachments with Earthlink Webmail on Firefox. I sometimes cannot see attachments to emails I receive, although the size of the file indicates they are there. When I try to send an email with attachments, the browser contacts Earthlink, and then the message reappears, but the attachments have been stripped. If I hit Send again, the message goes, but without the attachments. If I re-attach the attachments and hit send, they are again stripped. I contacted Earthlink support, and they told me it is a problem with Firefox. I then tried IE and was able to send the attachments without a problem.
I would really appreciate any help as Firefox is my browser of choice.1. Not sure how to send an email in a private browsing window... I use Earthlink Web Mail and I cannot find anything on that site about private browsing window.
2. Have not tried this yet, but will when I get a chance.
3. Not sure. My old computer ran XP. Never had the problem with it. Right now, it is not connected to the internet, so can't check it.
4. I neglected to mention... I did try IE and it worked fine.
I do have Norton 360 installed, but it was not a problem on the XP machine.
Thanks for your response. I have been so busy lately that I just now picked up your response. I have not had time t to try anything else.
As far as the file type, I was trying to send pdf files. Have not tried other file types.
Earthlink limits messages (and attachments) to 20 MB. The files were less than 3 MB. -
I find when I receive emails the attachments are often un openable - mostly these are when I sent documents to myself from my microsoft machine to my apple ; what do I need to be able to do to read jpegs, word etc docs and also Publisher type docs.
I find when I receive emails the attachments are often un openable - mostly these are when I sent documents to myself from my microsoft machine to my apple ; what do I need to be able to do to read jpegs, word etc docs and also Publisher type docs.
-
Are Email attachments not being saved
When saving an email I have the SAVE attachments box checked. However the attachments are NOT saved in the rtfd document. Any fix available?
Hi,
This issue may caused by Exchange delivered the email with Rich Text format which has some issues with incoming
email feature of SharePoint. Please try the following steps:
1. Open Exchange Management Console
2. Go to Organization -> Hub Transport -> Remote Domains (Tab)
3. Create New Remote Domain
4. Name can be whatever you want e.g. SharePoint
5. Domain Name = <domain of SharePoint server> e.g.
sharepoint.contoso.local
6. Click New to create that object
7. Then edit the new remote domain
8. Go to Message Format (TAB)
9. Under Exchange Rich-Text Format select “Never Use”
You can also refer to:http://www.yana.be/Lists/Posts/Post.aspx?ID=7
Xue-mei Chang
TechNet Community Support -
I have an application that allows folks to enter version numbers and they should be able to enter 1.10 but that 0 is getting stripped. This is a custom tabular application and I am using collections. The database column is a VARCHAR2. How do I prevent those trailing 0's from being stripped? Below is the code to create the collection, the populate it.
declare
la_cks wwv_flow_global.vc_arr2;
begin
if htmldb_application.g_fcs.count > 0 then
la_cks := htmldb_application.g_fcs;
else
la_cks := htmldb_application.g_f07;
end if;
htmldb_collection.create_or_truncate_collection('UPDATE_DTL');
htmldb_collection.create_or_truncate_collection('INSERT_DTL');
for i in 1..htmldb_application.g_f01.count
loop
if htmldb_application.g_f01(i) is not null then
htmldb_collection.add_member(
p_collection_name => 'UPDATE_DTL'
,p_c001 => htmldb_application.g_f01(i)
,p_c002 => htmldb_application.g_f02(i)
,p_c003 => htmldb_application.g_f03(i)
,p_c004 => htmldb_application.g_f04(i)
,p_c005 => htmldb_application.g_f05(i)
,p_c006 => htmldb_application.g_f06(i)
,p_c007 => la_cks(i));
else
htmldb_collection.add_member(
p_collection_name => 'INSERT_DTL'
,p_c001 => htmldb_application.g_f01(i)
,p_c002 => htmldb_application.g_f02(i)
,p_c003 => htmldb_application.g_f03(i)
,p_c004 => htmldb_application.g_f04(i)
,p_c005 => htmldb_application.g_f05(i)
,p_c006 => htmldb_application.g_f06(i)
,p_c007 => la_cks(i));
end if;
end loop;
end;_______________________________________________________________________________________________
DECLARE
l_cks wwv_flow_global.vc_arr2;
j PLS_INTEGER := 1;
vrow BINARY_INTEGER;
BEGIN
-- Get original MD5 checksum
SELECT wwv_flow_item.md5 (sak_co_impl_plan_dtl
, sak_co_impl_plan_hdr
, cde_co_impl_type
, nam_path
, nam_file
, num_version
) cks
BULK COLLECT INTO l_cks
FROM t_co_impl_plan_dtl
WHERE sak_co_impl_plan_hdr = :p30_sak_co_impl_plan_hdr;
IF HTMLDB_APPLICATION.g_fcs.COUNT > 0
THEN
-- Compare the original checksun, l_cks,
-- with submitted checksun, htmldb_application.g_fcs
-- If they are different, raise an error
FOR i IN 1 .. l_cks.COUNT
LOOP
IF HTMLDB_APPLICATION.g_fcs (i) != l_cks (i)
THEN
ROLLBACK;
raise_application_error
(-20001
, 'Current version of data in database hs changed '
|| 'since user initiated update process.'
RETURN;
END IF;
END LOOP;
ELSE
-- Compare the original checksun, l_cks,
-- with submitted checksun, htmldb_application.g_fcs
-- If they are different, raise an error
FOR i IN 1 .. l_cks.COUNT
LOOP
IF HTMLDB_APPLICATION.g_f07 (i) != l_cks (i)
THEN
ROLLBACK;
raise_application_error
(-20001
, 'Current version of data in database hs changed '
|| 'since user initiated update process.'
RETURN;
END IF;
END LOOP;
END IF;
-- update t_co_impl_plan_dtl
FOR i IN 1 .. HTMLDB_APPLICATION.g_f01.COUNT
LOOP
IF HTMLDB_APPLICATION.g_f01 (i) IS NOT NULL
THEN
UPDATE t_co_impl_plan_dtl
SET cde_co_impl_type =
REPLACE (HTMLDB_APPLICATION.g_f03 (i), '%' || 'null%'
, NULL)
, nam_path = HTMLDB_APPLICATION.g_f04 (i)
, nam_file = HTMLDB_APPLICATION.g_f05 (i)
, num_version = HTMLDB_APPLICATION.g_f06 (i)
WHERE sak_co_impl_plan_dtl = HTMLDB_APPLICATION.g_f01 (i);
ELSE
IF (HTMLDB_APPLICATION.g_f02 (i) IS NOT NULL) AND (REPLACE (HTMLDB_APPLICATION.g_f03 (i), '%' || 'null%', NULL) IS NOT NULL)
THEN
INSERT INTO t_co_impl_plan_dtl
(sak_co_impl_plan_dtl
, sak_co_impl_plan_hdr
, cde_co_impl_type
, nam_path
, nam_file
, num_version
VALUES (seq_co_impl_plan_dtl.NEXTVAL
, HTMLDB_APPLICATION.g_f02 (i)
, REPLACE (HTMLDB_APPLICATION.g_f03 (i)
, '%' || 'null%'
, NULL
, HTMLDB_APPLICATION.g_f04 (i)
, HTMLDB_APPLICATION.g_f05 (i)
, HTMLDB_APPLICATION.g_f06 (i)
END IF;
END IF;
END LOOP;
FOR i IN 1 .. apex_application.g_f30.COUNT
LOOP
vrow := apex_application.g_f30 (i);
DELETE t_co_impl_plan_dtl
WHERE sak_co_impl_plan_dtl = HTMLDB_APPLICATION.g_f01 (vrow);
END LOOP;
END;Edited by: kims on Aug 24, 2010 7:52 AMPlease edit your post so that the code extract is wrapped in *\...\* tags as described in the FAQ. That will make it easier to read and hopefully stop the subscripts being converted into icons...
Note that you should always provide the information requested in the forum sticky threads:
- APEX version?
- DB version and edition?
- Web server architecture (EPG, OHS or APEX listener)?
- Browser(s) used? -
Wiki Some Attachments are Broken
For sometime in the past few weeks, something has gone with our Wiki Attachments. Some links are working without issue, and some are getting a 404 error. The links with 404 are being redirected to the same URL, however there is a /sandbox/ before the groups. This is what I can see as a global issue for all non working URLs. I have already deleted dataVersion.plist, globalIndex.db, directoryIndex.db related files with a teams restart. The files are re-created sucesfully after a teams server restart.
the wikid access logs look like this
web2.oakparkusd.org - unauthenticated [02/Nov/2011:22:12:13 -0700] "GET /groups/od_wiki_besteachers/wiki/bc5f2/attachments/955e7/Dancing%25202010%2520- %2520Medium.m4v HTTP/1.1" 302 3089 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_8) AppleWebKit/534.50 (KHTML, like Gecko) Version/5.1 Safari/534.50"
web2.oakparkusd.org - a8c32184289cafc23a5bc7925ebb6855f9c4b8c8 [02/Nov/2011:22:12:14 -0700] "GET /sandbox/groups/od_wiki_besteachers/wiki/bc5f2/attachments/955e7/Dancing%252020 10%2520-%2520Medium.m4v?sessionID=a8c32184289cafc23a5bc7925ebb6855f9c4b8c8 HTTP/1.1" 404 2860 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_8) AppleWebKit/534.50 (KHTML, like Gecko) Version/5.1 Safari/534.50"
web2.oakparkusd.org - unauthenticated [02/Nov/2011:22:12:15 -0700] "GET /collaboration-config/locStrings.js?v= HTTP/1.1" 200 45420 "https://web2.oakparkusd.org/sandbox/groups/od_wiki_besteachers/wiki/bc5f2/attach ments/955e7/Dancing%25202010%2520-%2520Medium.m4v?sessionID=a8c32184289cafc23a5b c7925ebb6855f9c4b8c8" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_8) AppleWebKit/534.50 (KHTML, like Gecko) Version/5.1 Safari/534.50"
web2.oakparkusd.org - a8c32184289cafc23a5bc7925ebb6855f9c4b8c8 [02/Nov/2011:22:12:18 -0700] "POST /sandbox/groups/od_wiki_besteachers/wiki/bc5f2/attachments/955e7/Dancing%252020 10%2520-%2520Medium.m4v?sessionID=a8c32184289cafc23a5bc7925ebb6855f9c4b8c8 HTTP/1.1" 405 3055 "https://web2.oakparkusd.org/sandbox/groups/od_wiki_besteachers/wiki/bc5f2/attach ments/955e7/Dancing%25202010%2520-%2520Medium.m4v?sessionID=a8c32184289cafc23a5b c7925ebb6855f9c4b8c8" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_8) AppleWebKit/534.50 (KHTML, like Gecko) Version/5.1 Safari/534.50"Hi,
I guess someone pasted an incorrect URL in a post.
I believe the correct the URL you're referring to
is http://swforum.sun.com/jive/thread.jspa?threadID=46831&tstart=0
John
JSC QA -
How to easily force Mail to keep attachments from being inline?
Attachments sent from Mail are being viewed inline in Gmail. I'd prefer they be viewed as attachments. The attachments in question are small (windows-friendly) attachments. Also, the message header in gmail indicates that Mail is forcing them inline (Content-Disposition: inline;). This issue seems to have begun after upgrading to OS X 10.6.7.
Any ideas?There is nothing new in this regard with 10.6.7 -- it has been more or less the same concept from 10.1 forward -- the attachments that View in Place as you Compose are in fact true attachments, Inline header notwithstanding.
Whether they view Inline for the recipient is controlled by the recipient's email app. Most modern ones would have them View in Place or Inline view regardless of the header.
I am not sure what you mean by how they are viewed in Gmail, as I cannot determine whether you mean a Gmail account in some email client like Mail or Outlook, or when viewing via web mail and a browser.
With all attachments, it is best to place them at the end of the message -- there is a setting in Mail to do that automatically -- and to send to most recipients in a Plain Text message.
More info, please.
Ernie
Maybe you are looking for
-
Wrong orientation of backsides of landscape pages when printing with Acrobat Pro 9
Since I switched to Acrobat 9 I have the following problem: Two landscape orientated documents that were printed identically with Acrobat 8 are printed different with Acrobat 9 (backsides of the document are rotated 180 degrees). The documents have t
-
Every day or so Thunderbird says there is an unread message. I look for it and find it on the list of my messages received. It is in bold type as if it is unread. However I had read the message days ago. I had this problem a couple weeks ago and deci
-
How to retrieve deleted camera roll on ipad
Can anyone help? I have deleted the camera roll photos from the ipad by mistake. I plugged the ipad into my computer and treated it as a camera device and selected copy all pitcures. I could not backup to the icloud because the files were too big. I
-
Crawl perfect in FCE4, jittery on export
Hi- I'm creating crawls over Hi Res photos in FCE4 that are smooth in my Canvas but when I export them to .mov there's a slight jitter. I've tried just about every export parameter and still no change. I've also tried viewing the export in Quicktim
-
Sending multipart-SOAP to JMS-queue
Hello, we have SAP -> IDoc -> XI -> JMS -> Sonic MS scenario. On JMS-receiver adapter, we are sending the XML-message with a SOAP-envelope. We do that by selecting Entire Message = JMS Payload. XI creates so called a multipart SOAP-message, where the