TS3276 how does one select a folder for an outgoing email, prior to sending out that email?

I would like to know what I need to do to select a folder for my outgoing emails before I send them. In other words, if I am sending a message to someone, Outlook has the option to select the folder where you would like to save the outgoing email to. That way, you are able to document all of your important outgoing emails. I was wondering if Apple mail had the same option. I know you can set rules up, the challenge is that the rules do not always apply depending on the email messages.
Thank you for your assistance.

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

Similar Messages

How does one transfer CS5 actions for use with CS6?

CS6 installation, which was uneventful, has transferred none of my actions from my copy of CS5. The CS5 actions are located in the actions folder of the APPLICATION/PHOTOSHOP CS5/PRESETS/ACTIONS. The "actions" folder in application support/adobe in my library is empty, and has always been so.
Only the CS6 default actions are located in the same folder for CS6.
I use imac i7, lion.
Note that i also have CS3 and CS4 on my machine. This due to recent upgrade to CS5 and recent upgrade to LION, and my general paranoia.
Must i load each action into CS6, one at a time?
thanks to any and all.
vince

Re: how does one transfer CS5 actions for use with CS6?
On a Mac - There are multiple ways to do this. I have done them both ways. In order to do this you need to know where you have your actions stored, and you can move them all at once if you have them stored in the same location.
1. You can load an action ONE AT TIME into your actions palette by:
     A. Open up the action palette and click on the little arrow with 4 little horizontal lines next to it on the upper right corner of the actions palette.
     B. Select "Load Actions" and a Finder window will open up and you can search your computer through this window for your actions.
     C. Click on the action from the Finder window then click 'Open' at the bottom right of the finder window.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens- click on 'Save Actions'. It will select the location where the          actions are currently stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
2. TO MOVE MULTIPLE ACTION SETS AT ONCE
     A. Open up CS6 (or CS5) and move the Photoshop workspace it to the right side of your computer screen so you can see your desktop on the left side.
     B. Open up your Finder search window from your dock (the square blue head icon thingy for those who are new to photoshop). Move this to the left side of your screen so you can see the Photoshop work space on the right and the Finder window          on the left. In the Finder window, navigate to the file where all your actions are stored, select all the actions in the file (command+A will select everything in the file if you are actively inside the open file) or you can select multiple files           individually by continuously holding down the command key and clicking on the different actions you want to move.
     C. With the Photoshop workspace visible on the right, and the actions palette open so you can see that the actions actually transferred - In the Finder window, click the selected actions you want to load and drag them over to the Photoshop           workspace. I did this without an image open, I just dragged them onto the empty workspace. The actions should all appear immediately in the actions palette that is open.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens click on 'Save Actions'. It will select the location where the           actions are stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
I hope this helps.
and I hope there are no typos.

HT201991 How does one write a review for an app?

I would like to write a review for an app I bought from the App Store.
"Locate the item that you would like to write a review for."
Where? In the App Store via the internet (e.g. on my iMac), OR via the App Store button on my iPad Mini?
"Click "Write a Review" in the Customer Reviews section."
How? I could find no active link associated with the Customer Reviews section once I had located the item for which I wanted to write a review.
So the question remains "How does one write a review for an app?" … and, so far as things stand, the instructions provided in the page <http://support.apple.com/kb/ht3928> are, as far as I can tell useless. Certainly, the Apple website and associated instructions have become, for this long-time user, more akin to Microsoft Windows in their impenetrable lack of intuitive, user-friendly ccharacter.
Oh yeh. To add to my 'disgruntledness' … How come there is no iPad Mini option in the Product drop down below?
Where is Steve Jobs when you need him?!

I have been having this issue for months, now--at least 3-4. I updated my credit card info on my account, thinking maybe that would do it, but NOPE--can't review a single thing I've ever purchased in iTunes--not from my iPhone 5, PC or iPad 2. Ridiculous, at this point...just remove the ability to review at all, if this is how it's going to be. SO frustrating.

How does one keep the photo description attached to a photo in iphoto when that photo copies to a disc or flash drive

how does one keep the photo description attached to a photo in iphoto when that photo copies to a disc or flash drive?
the metadata transfers ok, it is the description of that photo that does not transfer.

Use the File -> Export command and note the settings to write the metadata to the file on export.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.

How does one set up two different iTunes accounts on the same computer so that they do not merge into one?

How does one set up two different iTunes accounts on the same computer so that they do not merge into one?

mparker402 wrote:
So, when the other iTunes account needs to be used, I should log out of Windows and have the other user log in under a different Windows account, correct?
M Parker,
Yes, since you are trying to keep things separate, that is exactly what you would do.

I wanted to know how does technical support work via icloud and is there any new technology out that helps providing technical support

i wanted to know how does technical support work via icloud and is there any new technology out that helps providing technical support?

basically I’m doing a project were I wanted to find out if there are recent technology out that provides technical support for example they do it with remote access but is they any new ways that they can support us and just wanted to find out if icloud gives technical support then how?

How does one MAKE a LIBRARY for GARAGE BAND to IMPORT?

I have been looking for some kind of SDK that would allow the creation of a library for GB and allow the sharing of libraries that multiple production teams can use.

So then your question is: How do I script an Installer (?)
More often than not, companies simply create a Disk Image because all you need to install a group of loops is to drop their folder on the GB Loop Browser. That's it.
The Jam packs install a lot more than just loops, so an Installer is required. Adding loops is so simple it's generally hard to justify the extra effort and man power.
However, if you really want to go through the extra effort, and for whatever reason, your project actually requires it, then you might want to become an ADC member:
http://developer.apple.com/products/

How does one search the Store for IOS 4.21 only apps?

Hi,
I have FOUR iPod touch 2nd gens, with a max OS of IOS 4.21. How do I search the Store for apps that will actually work on these devices?
Thanks!

iOSSearch - search the iTunes store for compatible apps.
Vintapps 3.1.3 - paid app.
Apple Club - filter apps by iOS version.

How does one protect a folder of passwords?

How do you protect a folder created in Numbers full of passwords?

A different way to solve this problem is to use Keychain. Each set of passwords used by each application is encrypted, and your master password (usually set to your login password and unlocks when you log in) unlocks the lot of them.

How does one prevent a folder's contents from being read while running in target disk mode?

I want to prevent a folder's contents from being seen or used by a second computer that is connected to my iMac when it is running in the firewire
target disk mode. Whenever I put my iMac into the Target Disk Mode all of its disk contents, for all users on its disk, can be seen and used by the second computer without needing any passwords. Does anyone know of a simple way, short of using FileVault, for protecting folder contents when viewed while running in the target disk mode? I would like to protect the entire contents of my "Documents" folder from being viewed by anyone that connects to my iMac via the firewire target disk mode.

Many users make a password protected Disk Image using Disk Utility to keep selected files protected. I have one such image myself that I keep on my Desktop containing passwords and such. I'm not sure if you could put the entire contents of your Documents folder into a secure disk image but you could certainly make one and put your most sensitive items in it within your Documents folder.
I agree with you for not wanting to use FileVault. I've never used it myself and am very leery of it due to things I've read from other users.
Regards,
Steve M.

How does one create a form using flash and have it be sent to an email address (using adobe air for android if that matters) ?

I am trying to make an app for my Cab Company and was going to add a reservation form, however idk if you can add html code or how to make one with as3, and I haven't been able to find a decent tutorial anywhere online.

You will need to find a tutorial for sending email via AS3 (normally requires a PHP or other server-side processing file). Search Google using terms like "AS3 send email tutorial" and develop things from there.

How does one select the language of a piece of text in Pages 5

I often work with multipel language in one document. In the pre version 5 Pages one could select the text and go in inspector and change the language. Not very handy, MS Word is always been much better at this. Even WordPerfect 1.0 was better. But in version 5 I can't find this function.

If you live in the world outside the USA, you will find that there are a lot of different language. If like me, and this is the case for a lot of people in Europe you have to make document in several languages Pages 4 was already a user un-friendly program. The detection you manhunt will not work:
If you take languages that are of the same family like Flemish/Dutch, English, German, enz… a lot of the words are similar but differ non the less.
Languages tends to take on words from other languages, in the past a lot of French has gotten into English. Flemish/Dutch has taken on a lot of English words in the last several decennia.
Hens Pages 5 has become a wast of HD space. There is something very wrong @ Apple.

HT4759 How does one request a refund for an iCloud account you don't want. There seems to be no easy way of doing so unless I pay 20 bucks to speak with someon

I am a relatively new Apple user and I purchased an iCloud account in November and then another one in December, thinking that I needed an account for each of my devices (3). When I found out this was the case I tried to reply to the email confirmation address for a refund and it came back as undeliverable. Tried to contact support but in order to talk to anybody I had to pay 20 dollars!! Why is it so hard to buy into it but oh so hard to get a refund?

Here are the screenshots for what it's worth.
Not sure why I can't post them in the original post. 
Mod edit: See [https://bugzilla.mozilla.org/show_bug.cgi?id=718813 bug 718813]
'''Again, when I set my DNS server to automatically detect the servers both problems disappear and I have no issues at all.'''
IMO opendns is either doing this on purpose (unlikely) or they're under some sort of attack/being used to attack the specific torrent sites although I'm open to other explanations. I believe using the automatic setting for DNS is using my own ISP's DNS servers (which again, work fine... but still...)
I'd rather not use Google's public DNS servers as Google is to commercial these days and I think there's potential privacy issues.
'''Again I have changed the setting for DNS servers back and forth several times to duplicate/verify the issue(s)... and the issues only happen with the opendns servers.'''

How does one change the folder to which scanned images are saved?

Using a CanoScan 9000F Mark II scanner
Using the ScanGear driver software that came with it
Right now every time I scan something, it is automatically saved in "My Documents", and I have to drag and drop the file where I really want it to go. How do I change it so that the file is saved where I want it to go in the first place. Also, it is automatically assigning a file name so that I have to go to the file and change that to what I would like it to be too. How do I make it so that I can name the file before it gets saved. Neither do I see where it gives me the option to choose the format in which the file is saved; it is saving the files automatically as JPG, but I would like to save them as TIFF or BMP.
These seem to be very standard options; so I don't know why I'm finding it so hard. I must be blind or something.
Thank you for your time and assistance.

Hello barbarossa,
Great question! You can change all these settings through the My Image Garden software. The exact procedure will vary depending on the version of Windows you are using.
If you are having any difficulty locating this software, feel free to visit the link below to let us know your operating system and we can follow-up with step-by-step directions. Thanks!
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How does one select hidden elements?

Hi there,
I have 50 or so elements on the stage that are exactly the same size and set on top of each other, but since they are set to be hidden and revealed at different times I find I cant select them all to move them as one. Even if I group them into a div and move them, the only one that moves is the one that has the timeline needle on it at that moment.
Is there a way of selecting all items, even if they are at that moment turned off? A way of selecting through time as well as space?:)

Select your item in the elements panel on the right.
Now look at your timeline. If you look on the left of the timeline, you will see the display property showing as 'off' in yellow. Click on it. It will change to 'on'. Proceed to make your change as you now see your object. Then when you are done with your change, get back to that frame if your are not there any more and click on 'on' and it will turn to 'off' again.

TS3276 how does one select a folder for an outgoing email, prior to sending out that email?

Similar Messages

Maybe you are looking for