TS3276 I am no longer receiving my mail. All my settings are the same and I can send mail. The connection doctor says I am connected, but I am no longer receiving anything. If you can help, I would appreciate it. Keep it simple, please.
I am no longer receiving my mail. All my settings are the same and I can send mail. The connection doctor says I am connected, but I am no longer receiving anything. If you can help, I would appreciate it. Keep it simple, please.
Similar Messages
-
I have no sound on my MacBook Air for sending and receiving messages. All sound settings have been checked and are OK. This problem has arisen many times and is intermittent in the sense that the sound returns and disappears for no apparent reason.
Open System Preferences > Sound > Sound Effects
Select: Play user interface sound effects
And make sure the Mute box is not selected.
Now open Mail. From the Mail menu bar clik Mail > Preferences then select the General tab.
Make a selection from the: New messages sound pop up menu. -
My macbook pro with OS 10.6.7 'mail' program does not send my mail through the IPS wireless, I am connected to. The message is my 'e-mail is rejected by the server'. It has been working until 5 days ago. The connection doctor says I am connected and no log in required.
After trying lots I found now in 'Airport Utility is 'unable to detect any airport wireless devises.....'
There is no provider to be seen in airport utility and only 'rescan' is an option with no results...
even so I am connected and can browse the net receive mail etc. and the outgoing 'mail server' is set to the internet provider I am connected to.
Can you enlighten me what can I do I need to use my e-mail program urgently !!!
Thanks for your helpI'm not sure what "IPS wireless" is, but unless you have an Apple Wi-Fi base station (such as a Time Capsule, AirPort Extreme, or AirPort Express), AirPort Utility won't see anything.
You might try defining a new SMTP server to see if that will work any better.
By the way, the subject field for these messages isn't intended to hold a lot of text. Put a short description of your problem in the subject field and save the rest of your message for the body field. -
I have checked the server, checked connections, still cannot send mail.
It says: "Cannot send message using server [email protected] (MobileMe)
Connections to the server “smtp.me.com” on the default ports timed out.
Select a different outgoing mail server from the list below or click Try Later to leave the message in your Outbox until it can be sent."
The Connection Doctor says nothing is wrong and I am connected to the Internet. (Thanks.) -
Email intermittently says it can't connect to the server but connection doctor says I'm connected
I have both my Yahoo and work email accounts on my MacBook Pro. Intermittently, my work email refuses to send, giving me the error message that it can't connect to the server. Connection doctor says work email is connected to the internet, and some emails will go while others won't. Have checked server settings agains my Iphone, and they are identical. No problem emailing from the phone. Help?
Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click the line below to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return. -
Dear Friends,
I need to interface SCC-TC02 with help of SC 2345 and PCI-6024E DAQ Card.But i can not understand example program.please send me the procedure to interface these three componnets and if possible send me the program.
With Regards,
Eswaramoorthy K Vnce of nth triggering pulse. i need to know when the when the ist trigger occurs and when the nth trigger occurs . please tell me how to to . what i know is that event triggering has to be done with start and stop trigger. please tell me how it has to doneSuresh;
What you will need to do is to set up a digital start and stop triggered Analog Input acquisition. Then you will need to have a counter set as event counter, having the specific number of pulses you need configured as the preset value, configured to count down, and generating a pulse after the terminal count has been reached. That counter output will be the stop trigger of the Analog Input operation. In summary, you will have the external pulse being both the digital trigger of the Analog Input operation and the source pin of the counter, and the counter output being the digital stop signal for the analog input.
I'm attaching a Labview VI that does the start and stop analog input acquisition. You will need to include the counter part and set the stop s
ignal to be the counter output.
Hope this helps.
Filipe
Attachments:
AI_Start-Stop_D-Trig.zip 25 KB -
When using Mail Connection Doctor two error messages come up with regards to sending and receiving mail from my @mac.com account.
The first one says that my @mac.com account: "Could not connect to this MobileMe IMAP server." How do I fix this? Is this caused by the way I have set my preferences? Is this related to joing iCloud? Or my ISP Verizon the problem?
The second one says in reference to my Apple Server: "Could not connect to this STMP server. Check your network connection and that you entered the correct information in the Account perferences. Also verify that the server supports SSL. If it does not, deselect the "Use SSL checkbox in the Advanced tabe of Account preferences." This box was not checked. Two days ago these problems did not exist. Again, how do I figure out who to discusses these problems with?
Feedback is most welcome.
SallyHello:
This may help....
http://www.apple.com/mobileme/transition.html
Barry -
I have a macbook and I just upgraded to Lion, downloaded the new software for Itunes and added a gmail account in addition to my existing aol account. Altho both mail systems are visible in my mail account I'm no longer receiving emails from either account. I checked the mail doctor and both accounts are connected to the server, but I can't figure out why I'm not receiving emails any longer. I'm trying to clean-up my stuff before I add my new Iphone, but I must admit all of this is rather daunting. Also does anyone know when tech support is available? it must be PST cause no one is there at 8AM EST!
Hello,
It isn't the fw in Network you want o use or look at, that's for something completely different.
My first suspect is the Power Adapter on the LaCie has gone.
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html -
I love my apple email and do not want to use google mail on safari. However, I have 2 gmail accounts set up on apple mail, but when I send mail from one of my gmail accounts (I choose the specific gmail account in the drop down window), it actually goes out as if it is from the other gmail account. I can't have that happen because one is my job, the other is a personal business account and unfortunately, the mail from both gmail accounts want to send through the personal business account. How do I make it send from a specific gmail account? I even tried deleting the accounts and setting them up again hoping I set it up wrong in the first place, but to no avail, it is still doing the same thing except this time I set the job account up first and then the personal business account and now everything goes from the job account! The only good thing is that the incoming messages work properly and they go into the correct inbox. Somebody please fix my outbox!
In Mail Preferences/Accounts/each GMail account, set up the SMTP Outgoing Server for each account separately, going into SMTP name/edit/Advanced and specify the Username of each account. The Outgoing servers must be two different servers, authenticated by the Username and Password of each.
Otherwise, the GMail SMTP server will change the from address to that of the account where the SMTP server was setup.
Ernie -
Mail won't send but Connection Doctor says smtp account OK.
Mail won't send but Connection Doctor says smtp account OK.
I can receive mail but can't send it from Mail 3.5. Same problem on a wired G5 and on a wi-fi MacBook (using the same account), so not hardware related. Worked fine 'till today - I didn't change anything in between times. Incoming mail no problem. Tried mail rebuild, keychain first aid, deleting the account, repair disk permission - doesn't help.
Mail's connection doctor says "smpt.xxxxxx - connection to server succeeded, no login required."
Anybody any ideas? Thanks, NBeen having the same problem for a few weeks now. This has been working just fine, and all of a sudden - nothing. The update to 10.5.6 didn't do anything to fix this either.
I've spent numerous hours on the phone with the Apple support. Seeing as the two other accounts that I have configured work with no problem, they say that this is a problem with the provider which is also the ISP. I then called the support line for the ISP and informed them of this and they say that it's a problem with the software.
Interestingly, if I send a message to somone with the same ISP, the message will go. But I can't send a message outside of the provider. Does anyone else have this problem?
Also, from another forum, they suggested rebuilding the LaunchServices database. The Apple support didn't see what that would do. But I tried it anyway and the problem still exists.
Another intesting thing is certificates. It's only happened twice, but I've received the message saying that Mail can't verify the certificate XXXXX which validates the identity of the smtp. Anyone else get this? I thought perhaps I could delete the certificate and it would magically reappear. But when I go into KeyChain, the certificate is listed only under System Root and I can't delete it.
ideas? -
File To Proxy : Handle the response from ECC to send mail without BPM
Hi,
Scenario: FILE To Proxy
Requirement: We are receiving xml acknowledgement file from bank with IDoc number and status in SAP PI and the file is used to send the status number, message and and IDoc number to ECC. After request is received in ECC BAPI is executed to update the original status of outbound IDOC.
There would be multiple records in file and PI will send all IDoc acknowledgement to ECC to update the IDoc status.
Issue: Since PI send all records to ecc, if any single IDoc status update is failing in ECC how would it can be communicated to support.
ECC can send success or error response in proxy but how we can use the same in PI to send mail to support. Or is there any better error handling we can go for in such scenario.
Thanks,
VertikaHi everyone
thanks for response.
Interface 1: IDoc (ECC) to File (Bank) --> Done
Interface 2: Acknowledgment File (Bank) to BAPI (ECC) where BAPI will update the status of IDoc sent in first interface.
For Interface 2 : PI will receive file from Bank with multiple records i.e multiple IDoc numbers and their status. PI will invoke proxy to send the IDoc number and status number (eg 16) for all the records together. Now if BAPI fails to update status of any single IDoc in that file how support team will know that the particular record is failed. To handle this error ECC is saying they can send Error and Success back to PI. But the problem is how we can use that response in PI in the same interface to send emails to support team. Bank does not want any response back in this case. This is just to ensure proper error handling since this is bank related interface.
Splitting the interface in two interfaces will definitely help. But is there some way which can be used in same interface and based on error response from ECC mail is triggered.
If any one has better suggestion for such kind of error handling, please post the same.
Thanks,
Vertika -
I am using a macbook pro. I am not able to send any mails from my mac. I can recieve mails, but can't send.
However, I can send mails when I log into yahoo or gmail from safari.
Please give me measures to correct this issue.
Thank You.
Neel Jain
<Email Edited by Host>I am using a macbook pro. I am not able to send any mails from my mac. I can recieve mails, but can't send.
However, I can send mails when I log into yahoo or gmail from safari.
Please give me measures to correct this issue.
Thank You.
Neel Jain
<Email Edited by Host> -
I have recently purchased the iphone 5S and have two AOL email accounts set up on it. They could both receive and send mail on the first day, but from the second day only 1 can send mail (both still receive). I get an message saying "Unable to send mail. A copy has been placed in your Outbox. Sending the message content to the server failed." This has been the response now for 3 days and suddenly this morning, I was able to send an email from this account, but only the one and now it's back to that same message. I have deleted and added the account again, using various methods. I even reset my phone and set it all up again from beginning with no luck. It is very frustrating and I am unsure why I can't send from both accounts, especially being that they are the same provider. I have read forums and it appears many have this same problem and I wondered if anyone has had it recently on this phone and how they fixed it. Someone said just use the AOL app to send from this account, yes that can be done, but it's inconvenient having to sign in all the time when i have a mail app that should work automatically. Any suggestions would be welcomed!!
I am not sure if this issue is going to help you but lets give it a try.
I know that where im from, which is the Netherlands, I am not able to sent e-mails from my iPhone or any other mobile device by using 3G or a random WIFI acces point. The provider only allowes you to sent e-mails when you are connected to a network of there own. Which means if you have provider "101" and your email settings are set up for this provider in your iPhone but your using the network of a friend of yours which is provider "202" you cannot sent emails from his network. Though you can receive them you may not sent.
As I said, I am not aware if this issue is the same for you totaly depents on the country and provider your using. -
Can send mail but not receive -- connection doctor OK, GetInfo shows msgs
In the last couple of days I stopped receiving email on my Mac in the Mail app, but not my PC. Both access POP3 accounts at the same ISP, different POP3 accounts. All software is patched to latest version using Software Update -- PowerMac G5 Dual, latest OSX version. On the Mac, connection doctor says I'm A-OK (internet connection, POP connection, SMTP connection.) Also, if I do a Get Info on the inbox and show messages on the server, it shows 75 messages on the server. I have not retrieved messages to my knowledge (so I don't think the server thinks I already downloaded them), and the "Messages that have been downloaded to my Mac" pulldown option in Get Info confirms this, by not showing any of the 75 messages in the Show all messages pulldown option. But -- Get Mail does nothing! I have tried rebooting, deleting and recreating the account, etc. Since I can get POP mail for another account at the same ISP on my PC, and I have touched nothing on the Mac, and all the diagnostics show the connection and POP3 chat is working perfectly, this very strange. I do not think I have applied any patches or anything that might screw it up, but who knows.
The only strange thing that might be a clue is the little spinning status indicator next to the InBox label runs for about 30 sec or so before it decides not to do anything -- seems a little long. Any suggestions? Any way to do detailed debugging of the POP3 session to see if the Mac-server conversation is wanked up somehow?
Thanks!
DavidFor POP accounts, Mail uses a file within the account folder to keep track of which messages have already been downloaded. Deleting it should cause Mail to download everything still on the server as if new. I don't think it'll work in your case, but try it anyway just to be sure:
1. Quit Mail.
2. In the Finder, go to ~/Library/Mail/POP-username@mailserver/.
3. Locate one or two files named MessageUidsAlreadyDownloaded and move them to the Trash. Mail 1.x used MessageUidsAlreadyDownloaded to keep track of which messages had already been downloaded. Mail 2.x uses MessageUidsAlreadyDownloaded2 for the same purpose.
You can use the Account Info window first to remove from the server any messages you don't want to be downloaded again.
You may try creating a new user account in System Preferences > Accounts, set up mail anew there, and see whether the problem happens there as well.
Another thing you may try is using a different method to connect to Internet, if possible. Also, if Preferences > Check for new mail is set to Every minute, changing it to something greater (e.g. Every 5 minutes) might help.
Something that usually works is removing some messages from the server (download them with another mail client first, to avoid losing them). Sometimes, Mail chokes on a message it cannot download, and that prevents it from downloading the rest as well.
Any way to do detailed debugging of the POP3 session to
see if the Mac-server conversation is wanked up somehow?
Detailed debugging no, but looking at the Console could be informative:
1. Open /Applications/Utilities/Console.
2. From the File menu, choose either Open Console Log, or Open System Log, or both, so that the Console application displays the contents of both system.log and console.log.
3. Try to reproduce the problem and look at the bottom of the Console windows for messages that might be written there as a result. They may provide some clues as to what the problem is. -
I can send mail but cannot receive it on my iMac since upgrading to Yosemite
I can send Mail but I cannot receive it on my iMac Mail account, have checked all account information and it is correct.
Hey phillipfrompaupack,
I see that you are having issues with your mail in Yosemite. Here is an article for you that will help you troubleshoot these issues:
OS X Mail: Troubleshooting sending and receiving email messages - Apple Support
http://support.apple.com/en-us/ts3276
Take care, and thanks for visiting the Apple Support Communities.
-Braden
Maybe you are looking for
-
HP 6840 Premier photo imaging, and Windows XP. Unable to get a solution from the support team, who apparently have never heard of my problem. Now, for the fifth time I have lost my 20 odd albums, each holding about 1000 photos.. They just disappear f
-
In which scenarion can you create a bitmap idex?
-
Access denied when trying to show table in jsp fragment?
I've had one page which has been groving obese over time. Now I've started to split out parts into jsp fragments using f:subview <f:subview id="frontStoreSupport"> <jsp:include page="/frontStoreSupport.jsff"/>
-
Function Modules in Data Modeling
Hi, Can anyone give me example of use of functional modules at data modeling side? Cheers!!!!!!
-
"New Analysis" button, what is?
Hi Friends! When a query is showed in portal, you can see the 'NEW ANALYSIS' button. >> What is this? Also, when I click on this, give me the msg "error reading history folder" ; What is the meaning of this? Thank you in advance!