TS3276 i am unable to open any links on any mail messages. thhis includes any buttons, such as view or buy when on a group on mail for example.
i am unable to open any links on any mail messages. thhis includes any buttons, such as view or buy when on a group on mail for example.
So I'm not Mary Frances. I'm her husband who is force to deal with this opaque and obnoxious equipment (iPad). With the iOS 7 update she could no longer follow web links by tapping them in an e-mail (it did work from a web page). After an hour of web searching, experimenting and rejecting the offer of an answer from apple help for only $20, I found that, if in settings/safari, you turn off the "Do Not Track" button, the ability to follow links in an e-mail by a tapping is magically returned.
Flash! I just went back to the ipad and turned on the "Do Not Track" button -- just to test my discovery. Predictably (by my cynical myself) you can still open a link in an e-mail, so I don't know what's happening/happen. But I'm not surprised.
Similar Messages
-
After updating to Maverick on my Mac - unable to open numbers or pages docs on iPad or iPhone any suggestions or info?
I Just found it on the apple site, it arrived on a cd a few days later and worked just fine again.
i would recommend backing everything up just in case. Better safe than sorry, trust me. I've lost so much when i didnt back up once when re-installing the system.
IT shoulldnt erase everything, bt it might, so back up just in case
should you loose everything, then i have some tips on moving stuff fromyour iphone/ipod to the computer -
After updated to iTunes 11.1.4 for windows vista , I was unable to open iTunes and it keep error message. My iphone unable to USB hotspot the internet to computer. Pls Help
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Adobe Reader could not open 'images rest 12-4.jpg' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
that is the message how do i correct this problemIt sounds like your file associations are messed up and Reader is trying to open your .jpg files. Is this correct?
If so, you just need to change the associations to choose what application opens them. Here's how: Change File Associations in Mac OS X -
when i open itunes, it gives me a message "the folder itunes is on a locked disk or you do not have write permissions for this folder" i am the only user and it was working a week ago whats wrong with it? it will not open itunes
Hi lvdmerwe!
I have two articles here for you that should be able to help you troubleshoot this issue further:
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/ts1387
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/ts1277
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
Can anyone assist me? I keep receiving this message when I download my ebook ''Adobe reader could not open .....acsm because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't decoded).'
Much appreciatedI think you should ask in the Digital Editions forum, Adobe Digital Editions
-
I get Apple Mail through having activated POP in gmail. Since a week, when I click on "Get Mail", after a delay I see brielfly flashing "Incoming message 70 or whathever the number in waiting is." and the green band extends to the end of the line in a fraction of a seconde, but then dissapears and no mails gets downloaded. It is not a matter of password etc.. that are all OK. Strangely, yesterdays, some email did come through after a few days of failure, but not anymore. Could it be related to hacking or something like that? Any thing I could try?
I have OX 10.6.8.
Many thanks for your kind suggestionsMaybe these will help:
https://discussions.apple.com/message/17677533#17677533
https://discussions.apple.com/message/18324129#18324129
https://discussions.apple.com/message/18203126#18203126 -
TS3276 i am unable to open web pages from email links on my ipad
I am unable to open web pages from email links on my ipad
A few more details might help, if nobody else recognizes this.
What happens when you try to open the links?
Can you post an example of a link that doesn't work?
Is there any particular source for the mail with the (bad) links, or is mail from all sources failing?
If you happen to know it, what's the format of the mail message? (Maybe the message is an image?)
Do the embedded links work as expected from an OS X system running Mail.app, or some system and some other other mail client?
To view the link in iOS: if you press on and hold your finger on an embedded link in most contexts, iOS will show a pop-up with the link contents, and will offer to copy it. You can use that to acquire and post the link. If pressing and holding on the link doesn't offer the pop-up, the format of the link itself may not be valid, or it might not really be a link. -
Unable to open CATS link through Portal...
Hi Guys,
I am unable to open the CATS Link through Portal.
Once I click the link "Record working time", Iam getting error message i.e:
500 Internal Server Error
SAP NetWeaver Application Server 7.00/Java AS 7.00
Failed to process request. Please contact your system administrator.
[Hide]
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
com.sap.aii.proxy.framework.core.BaseProxyException: Access via 'NULL' object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE
at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
at com.sap.xss.hr.cat.record.model.valuehelp.CatsValueHelpModel.hrxss_Cat_Wd_F4_Get_Meta_Data(CatsValueHelpModel.java:259)
at com.sap.xss.hr.cat.record.model.valuehelp.Hrxss_Cat_Wd_F4_Get_Meta_Data_Input.doExecute(Hrxss_Cat_Wd_F4_Get_Meta_Data_Input.java:137)
at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
at com.sap.xss.hr.cat.record.blc.RfcValueHelpManager.onRFCGetMetaData(RfcValueHelpManager.java:294)
... 66 more
at com.sap.xss.hr.cat.record.model.valuehelp.Hrxss_Cat_Wd_F4_Get_Meta_Data_Input.doExecute(Hrxss_Cat_Wd_F4_Get_Meta_Data_Input.java:137)
at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
at com.sap.xss.hr.cat.record.blc.RfcValueHelpManager.onRFCGetMetaData(RfcValueHelpManager.java:294)
... 66 more
See full exception chain for details.
System Environment
How to solve this issue?Hi,
You will have to check this with the person who is upporting our portal applications. From the error description it does not look like there is any thing wrong with CATS application as such.
Regards
Sreekanth -
I have an iMac G5 (20 inch screen) i sight (no intel chip).Leopard OS 10.5.8. Recently I went on Facebook and tried to open a movie site someone had sent me on Facebook andwhen I tried to open the video on Facebook, I was told I had to upgrade my Adobe Flash Player. i tried to do this, but turns out that Facebook is requiring folks to have an intel chip in order to view movies...this is outrageous! Just think of all the folks in the world who have great running pre intel chip Apple computers. I called the Adobe Help line and was told that I really needed to buy a new computer....no thanks. How do I find a way to get a new version of Adobe for Facebook and youtube. I wish Apple could develop a way to have intel chips installed in the older computers. If you have any suggestions on this please let me know.
Thanks, SarahEither get a screen cleaning cloth, or carefully us a slightly damp lint-free cloth and dry off with a dry link-=free cloth.
As to Flash Videos: I am in a similar same boat. I cannot watch flash videos on the BBC website or on BBC iPlayer, although all other flash videos (YouTube and FaceBook for example) are fine.
For reasons that passeth all understanding, they work with the PPC version of Firefox, called TenFourFoxG5.app, once you have anabled plug-ins, as it does not natively support Flash.
You can download TenFourFoxG5 from here:
http://www.floodgap.com/software/tenfourfox/
Now for the intersting bit: TenFourFox, like Firefox, does not support most plug-ins. Unless you are prone to headaches (in which case don't) you can read about that here:
http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
But there is a workaround!
Open TenFourFox and type in the address bar: about:config (no spaces) and click return. This gives you a warning that it might harm the application. Ignore that and click on 'I'll be careful, I promise' and you get the config file that you can edit - with great care.
Look/search (scroll down) for: tenfourfox.plugins.enabled
Set it to true. (Double click it to toggle it)
Now close TenFourFox, open it again, and Flash will now work, as it now uses the plug-ins that Safari has stored.
I am using Flash 10.1.102.64 in TenFourFox and it works just fine. -
I am unable to open web link in safari from Outlook - help!
I just downloaded Safari - when I click on a link in Outlook, I am unable to open it without cutting and pasting it in the browser. Please let me know which setting I need to change in Outlook and/or Safari to fix this problem. Thank you!
Try disabling or uninstalling the Ask toolbar and it should work again. This is a compatibility issue with the Ask toolbar following a security update in Firefox 3.6.13
-
Unable to open a link document
Dear All,
In test workbench , in the test case attributes tab
there is an option for opening the linked document which is linked to test case which is not working for us and we are getting following error.
Error message.
no info object found for the specified context
SAP note checked
976971
but it is old note....and we are solman 7.0 SP18
Can anyone help meDear Raghu,
my ST version is SAPKITL426
which is much higher than the one mentioned in this note.So this note cant be implemented
can any1one help me
Regards
Prakhar
Edited by: Prakhar Saxena on Nov 14, 2008 5:08 PM
Edited by: Prakhar Saxena on Nov 20, 2008 11:11 AM -
Unable to open weblogic link in OBIEE
Hi,
I am new to OBIEE, I installed OBIEE 11G in personal laptop and succesfully able to work on BI adminstration, but unable to open web logic console and other stuff which are web applications. I am getting error as cannot display page.
Is there anything I need to set inorder to work on web based applications? Please let me know as I am clueless to find the sollution for this.
Thanks in advance.Hi,
Clear all the events from the event viewer and then start the services and check whether the page is opened or not.
Before doing this check whether the BI Server has been started or not. If the services are started and eventhough you are not getting the web page then try the below options.
Steps to clear events in event viewer, Goto Control Panel > Administrative Tools > Event Viewer
Click on Event Viewer and in the left panel and right click on application and select clear all events option. Like wise you do for all the options available in the left panel
Once it is done restart the services and then open the weblogic console or em or obiee page etc.
Thanks,
Navin Kumar Bolla -
Hi,
I am trying to access rtsp links through my mobile but it is not working.
It looks like RTSP port is blocked.
Please let me know how to configure verizon router to enable rtsp port.
ThanksFor Verizon,
Please see my interaction with Rouge Aomeba regarding an application which worked fine before I moved from Comcast to Fios.
This is definitely an issue that is broken and needs to be fixed.
Please see my responses below
If there is anything I can do to help, please let me know...
Thanks,
On Aug 21, 2009, at 1:21 AM, Rogue Amoeba Support wrote:
Connection report for process: Pulsar (/Applications/Pulsar.app)
Total: 7.7kB sent, 148.6kB received
-I recently got a FiOS connection that I've been trying to make Pulsar work with, so some updates for you. First your last email:
a99.l2280060636.c22800.g.lm.akamaistream.net (204.2.179.102), Port554 (rtsp), Protocol 6 (TCP), 1.4kB sent, 18.1kB received
a741.l2280060640.c22800.g.lm.akamaistream.net (204.2.179.109), Port554 (rtsp), Protocol 6 (TCP), 1.4kB sent, 0.8kB received
a99.l2280060636.c22800.g.lm.akamaistream.net (204.2.179.100), Port554 (rtsp), Protocol 6 (TCP), 477 Bytes sent, 6.0kB received
dogstardata.org (76.73.53.101), Port 80 (http), Protocol 6 (TCP),0.8kB sent, 54.4kB received
www.sirius.com.edgekey.net (96.17.88.230), Port 80 (http), Protocol 6(TCP), 3.6kB sent, 69.3kB received
Where did you collect this log from? Doesn't look like the logs the ActionTec router spits out.
Under the Advanced icon select System Settings and midway down make sure System Logging is on as well as Security Logging...
Then go to the System Monitoring icon at the top and then to the Advanced Status menu on the left side, there you can see the system log... may be of some use
The log above can be found by going to the Firewall icon and then on the left side, the Security Log .... I looked here assuming some security policy was killing the stream..
After looking further... I see that there is a standard RTSP rule already in placeIt's interesting, my ActionTec 424 doesn't have a built in RTSP rule at all. I found it under the advanced icon at the top and then under protocols
What I cannot see on any inbound FIOS firewall router log is an
inbound attempt from the server that Pulsar requested the stream from
That's the thing, there -aren't any-. RTSP as Pulsar does it, does not involve any inbound connections, and thus doesn't require any Port Forwarding/Mapping. It should "Just Work" in all cases.
I suppose if a stream is allowed as a protocol in would not be flagged in a log
From the testing I've done though, it appears that the router is just hanging up doing the -outbound- connection. We send an RTSP "DESCRIBE" command to the server, and begin reading the reply back. The reply starts to come back in, and then suddenly the data starts coming in out of order. Finally the connection just hangs completely before the complete reply is received.
Under Advanced icon there is a QOS option .... I wonder if a QOS was set for the stream if it would handle it better and not mangle the stream
As far as I can tell, it is a bug in the router firmware. We send a request, and it mangles the reply data. Doesn't leave us much room for working around it.
I found these two posts interesting:
http://www.dslreports.com/forum/r22087100-FIOS-Set-Top-Box-VOD-Communication-Ports
http://www.dslreports.com/forum/r21843871-
These reference RTSP issues with a router in front of the Actiontec ... I have no router... just switches and gateways to the Actiontec which is doing all the DHCP assignments, firewall and routing. I tried VOD on the VERIZON STB box, it works fine, and according to the threads.... they use RTSP ... so why would RTSP work for the STB and not Pulsar?
Also... out of curiosity.... is the Sirius stream native from Sirius as RTSP? are they offering both the legacy and RTSP during transition to RTSP only .. or is this a RougeAmoeba / Pulsar independent implementation / connection converted from Sirius's native stream?
Next week I'm going to do some testing with a NetGear MoCa bridge, and see if that behaves any differently then the ActionTec 424.
Rogue Amoeba Software, LLC
==== BE SURE TO REPLY ABOVE THIS LINE! ====
Ticket ID: 95556
=============================== -
after trying out some add on's and even after disabling them, and even after reinstalling firefox afresh, i'm unable to open most of the websites(including gmail, hotmail, facebook etc).where as my other browsers works quite fine. the message keeps displaying that the "connection is untrusted"...pls help fellas...thank you
See if this helps:
http://www.techiecorner.com/1065/firefox-this-connection-is-untrusted/
Maybe you are looking for
-
Installing Elements 2 with OS 10.6.4 and Rosetta?
Hello. I'm on a Mac running OS 10.6.4. with "Rosetta" installed. I'm attempting to install my copy of Photoshop Elements 2. Yes--.I know its an old version--.but I've been using it for years and it suits my needs.I thought that Apples Rosetta was cap
-
Interest calculation on overdue amount payable to vendors
hi gurus i have a doubt on interest calculation on overdue amount payable to vendors,can you tell me interest calculation procedure.
-
Country-Specific Chart of Accounts
Hi Gurus, In the Chart of Accounts definition, it tells us that you can assign in total 3 Chart of Accounts for a GL account: 1. Operating Chart of Account - For daily transactions 2. Group Chart of Account - Corporate level reporting 3. Country-Spec
-
Show all devices that do not have an inventory
How can I run a report or show all devices that do not have an inventory? We have some devices that do not initially upload or run their first inventory. If I manually run it or send it to run from the console it works but I need to know which pcs to
-
Hello how did i reduce the length of the session id string thanks for all