TS3276 I cannot send any email that has photos. and cannot drag photos to desktop

I cannot send any email with photos attached.  Also cannot drag photos to desktop. keeps asking for password or email sent is "failed"

Thanks Larry, I am using the default account that was used by the previous version of iPhoto, I did not change any settings when I installed 11. The program deos not seem to give me an option to use an alternate. When I try to send photos I receive a message that the program does not recognize my username/password as follow; 
"The email server didn’t recognize your username/password combination."

Similar Messages

  • CANNOT SEND ANY EMAILS!!!!

    Hi,
    I finally downloaded the desktop manager last week and backed up my berry (after a year!). At the same time it updated my system to a newer version. Since then, my battery life is greatly diminished (one day only) and I cannot send ANY emails. I can send text messages, but not emails. I select "send" and the email just sits there. I also can't select "save draft". I can only select "delete", but then it warns me that I haven't saved (which is so annyoing, since I can't save!!) Help!!!!!

    Do a simple reboot on the BlackBerry in this manner:
    With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescirbed for most gltiches and operating system errors, and you will lose no data on the device doing this.
    Now try sending an email again. If still no lunck:
    On your BlackBerry device, go to:
    1. Options > Advanced > Host Routing Table > Menu > Register.
    2. Resend your service books from your carrier BIS site:
    From your handheld device:   http://www.blackberry.com/btsc/KB15402
    Go to the Personal Email Set Up icon and log in. Then under Help!, select Service Books, then select Send service Books.
    From your desktop PC:  http://www.blackberry.com/btsc/KB02830
    North American Carriers - scroll down to select your carrier
    WorldWide Carriers - Find your carrier on the list
    3. With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot. This reboot, even if you have already done this, is often needed to install the service books.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT6030 Since I did the update, my mail-programm doesn't work no more. So I cannot send any eMail out or change the text into the eMail. Help, this is a catastrophe!!! Lukas Schmid

    Since I did the Mavericks-update, my mail-programm doesn't work no more. So I cannot send any eMail out or change the text into the eMail. Help, this is a catastrophe!!! Lukas Schmid

    Hey Lukas Schmid,
    The following resource may provide more help in troubleshooting Mail for OS X:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/TS3276
    For more information, you can also visit http://www.apple.com/support/mail/
    Thanks,
    Matt M.

  • I just restored a new iPhone from iTunes and now it is continuously asking me for my email passwords. I can receive emails with no issue, but I cannot send any emails.

    I've entered my passwords for both email accounts numerous time and it still won't send any email and continuosly asks for the passwords.

    Hello Timmy790
    Try the suggestions in the article below to resolve the issue of seeing your old Apple ID on your iPhone.
    iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/kb/ts5223
    Regards,
    -Norm G.

  • TS3899 I cannot send any emails through my phone.

    I cannot send mail thorugh my phone.
    Each time I do a screen displays saying ' username or password is incorrect. Go into settings and check.'
    i have done that and it is still not working. This is a new phone as my last one had problems that could not be fixed. Please help me so I can have my email working, once again.
    Thanks.

    Who is your email provider? Have you checked with them on what settings to enter when setting up an account on a mobile device?

  • How to send a "Message" that has text along with a photo

    I take a photo with my iPhone5.
    I want to send both the photo and a brief message along with it.
    I touch the little arrow in the lower left hand side.
    If I select "Message" there does not appear to be any way to enter even a minimal amount of text.
    I know that I can "Email" it but this seems overkill.
    How can I send a "Message" that contains both a photo and text?
    Thank you.

    After selecting Message, you should see the pic in a white message box.  Just tap the screen in the box under the message.

  • HT1420 how do I deauthorize a computer that has crashed and cannot be recovered

    One of my 5 authorized computer crashed can could not be recovered.  How do I deauthorize it?

    There is no reason to do so unless you have reached the max of 5.
    If you have reached the max of 5, use the instructions in the link from which you posted your question to deauthorize all then authorize the computers you actually have.

  • I have problem send any email from iPad2

    I have a very weird situation.
    I had this iPad2 for  a few months and was able to receive and send email using 3 email accounts, from gmail, yahoo and hotmail without any problem.
    Howeverm after I came back from a trip, I could only receive email, but cannot send any email from any of these accounts at all!
    I am using WIFI. I have deleted all email accounts, turned off the ipad2, and started over a couple of times.
    I tried to recreate these account again one by one. After added one account, I tested it only to see no email can be sent!
    THere is no error message, no any information. All I know is the email I sent from my iPad disappeared!
    Any one here can help?
    Thanks!

    Disabling email scanning didn't fix it. I can open the Mozilla email client and it immediately tries to connect to the inbound AT&T mail server but then just sits there with no response. If I try to send a message same thing, tries to connect to outbound AT&T server but nothing. One of the options in the support doc said to remove the saved passwords and when the client restarts it will ask you to save your password again. The client never makes a connection to the server so it never has a chance to authenticate. Its almost like AT&T disabled their POP server.

  • TS3899 I can't send any emails from my iphone when I was outside of my house

    I cannot send any emails from my iphone when I'm out.
    How can I solve this problem?

    According to AOL they support IE, Firefox, and Safari: http://help.aol.com/help/microsites/microsite.do?cmd=displayKC&docType=kc&extern alId=73451
    Have you tried contacting there support to see if they are aware of the issue: http://help.aol.com/help/microsites/microsite.do

  • My macbook trackpad cannot send any commands

    hi, i have a 2009 macbook (white) and it encountered a problem recently, the trackpad cannot send any command buttons i.e i cannot click(eg, open/close etc. any folders) but surprisingly the scroll and the mouse icon works just fine.. i just want to know what is wrong and if possible the part that i should order..

    I created a new administrator account and logged in that. The Messages worked! I went back to current account, deleted the other account and still works. Thank you!

  • Cannot send any attachments in an email, i am able to send and forward.but cannot attach. it tells me silverlight has crashed

    cannot send any attachments in an email, I am able to send and forward. but cannot attach. It tells me that silverlight has crashed

    Edit the outgoing mail server setting to be the same for both.
    Your outgoing mail server is dependent on your internet access provider (the one giving you the juice to the internet). Many block outgoing mail servers that do not belong to them, unless you specify password authentication, and port of the outgoing mail server. The port of many outgoing mail servers is either 2662, or 587, or 2626. Try each and see which one works with password authentication. Note the password you would use is the same for checking mail at that server.

  • I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great

    I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!

    The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works.  Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up.  Try them again. 
    Google your particular isp, and ipad and many times you will find the exact settings needed for your isp.  Or tell us here, and soneone else may be on the same isp.  Some mail services need you to change a port, or have a unique name for the outgoing server.  
    Kep trying.

  • My email isn't working on iOS 7, saying that my password is wrong when it is correct, I now can't send any emails but I can receive them and when I do I get three lots of them

    My email isn't working on iOS 7, it is saying that my password is wrong when it is correct, I retype it in settings and try again it still says it is wrong, although I can revive emails but when I do I get three of the same thing and I can't send any emails, this all started when I downloaded iOS 7.

    Hello,
    Actually i also had changed my gmail password like to the above. Andyour recommendation seems to be the same to rebooting iPod touch, which didn't work for me when i had the same gmail problem with the incorrect password error in the continuous manner. However the problem has gone when i removed the gmail account so as to create the same one.
    Thanks
    YH Kwon

  • TS3276 I cannot get my outgoing SMTP server togo "On-Line" and cannot send out emails.

    I cannot get my outgoing SMTP server togo "On-Line" and cannot send out emails.

    I had this problem too but I fixed it today.
    Go to the mail menu preferences.
    Click on account in question.
    Select the outgoing SMTP mail server (the one offline), this has a drop down list, click on the edit server list.
    Click on the advanced button.
    Make sure use default port is checked.
    Make sure SSL is unchecked (unless your provider requires it, mine does not work with it checked).
    Have authentication set to password.
    User name should be your email address for that account.
    Make sure correct password is entered (for some strange reason my password box was blank on this account).
    Push the ok button.
    For me the SSL box was checked and the password was missing. This is strange to me considering I have unchecked the SSL Box on the mail preference advance page. Also, I went through the complete set up account when I first created the account, why was my outgoing server password box empty?
    I hope this helps.
    Here is a link to some visual aids with the steps from my ISP
    http://support.knology.net/content/smtpauth/smtpredirect.cfm

  • I am receiving incoming emails but all of a sudden, I cannot send any outward emails

    I am receiving emails but all of a sudden, I cannot send outgoing emails. Any ideas why?

    Please follow these directions to delete the Mail "sandbox" folder.
    Back up all data.
    Triple-click the line below on this page to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
    Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

Maybe you are looking for

  • How to open a e-card in attachment?

    Jam trying to open an e-card in a email.

  • Invalid printer name error (-41002)

    While I use 'Print Report.vi with new HP Deskjet 5443 printer (connected to the computer by USB and configured as a deafault) I get Invalid printer name error (-41002).  The application is working properly with other printers. The "HP Deskjet 5400 Se

  • Displaying a trie in a JTree

    I've thrown together a really simple class implementing a Patricia trie (see http://hissa.nist.gov/dads/HTML/patriciatree.html) for auto-completion of words. What I now want to do is display the trie in a JTree view. The problem I'm encountering is t

  • Best practices for data migration

    Hi All, This thread is useful for those who can use their opportunity to share the ideas and knowledge for making better and best use of data migration using Business Objects Data Services.

  • 10.2.0.4, Spatial and invalid objects

    We don't use spatial. We have no plans to use spatial. We do use Intermedia, badly. When I upgraded a database from 10.2.0.3 to 10.2.0.4, everything went OK, except that one object in the MDSYS schema (I can't remember its name, but it was something