TS3276 I cannot send mail. the server keeps asking for my password/user id for IMAP

Is there a way to have no passwords for either e-mail accounts.
Why am I continuously prompted for my IMAP and I do not know what that password is.

Who is the provider of this email account?  It can be very hard to distinguish between a PW prompt instigated by the Incoming server vs the Outgoing server.  What are the recommended ports to use for each from this provider?
Ernie

Similar Messages

  • Cannot Send Mail, the server rejected one of the recipient's addresses.

    I receive mail just fine. Can't send anything

    Interesting to read all your posts, as I too have had this issue with my BRAND NEW Wi Fi 3G 64 GB ipad. Everything worked perfectly well with wireless at home, then we left for a trip interstate. First night I tried to send three emails and received the message that the server had rejected one of the recipients and the messages had been placed into the out box. Most annoying, as the out box is not accessible. I phoned apple and, after much discussion, it was suggested I call my ISP (BigPond). Another lengthy discussion and it was noted that there were no messages in my out box on the server, therefore the issue was with the ipad. I downloaded gmail and was able to receive and send emails using that program. Was also able to access my emails via Big Pond's web mail. It was just the mail program on the ipad that continuously looped back to the same error message. I deleted the account and decided to ask for a refund on the ipad. Back home, I have reinstalled mail to my Big Pond account and all seems to be working well. Am not sure what to do next, as I will be very disappointed if this keeps happening. The ipad is an expensive investment and I want to be able to use it to its fullest extent. Otherwise, I love apple products and am a apple user of more than two decades.
    Good luck all.

  • I am trying to email pictures from my ipad to my email address on my computer and I have been going along nice but now I get a message that says "cannot send mail the message was rejected by the server"  can't see to figure out why it stopped sending now.

    I have been emailing pictures from my ipad to my computer and have been going along nicely and now when I went to send 5 pictures to my computer from my ipad I am getting a message that says " cannot send mail The message was rejected by the server"  cannot understand why this is happening and have not been able to fix.  Now when I try to send pictues even to another email address I am getting the same message.
    Help.

    Email may not be the best way to move pictures.
    There are lots of ways of moving files.
    A simple and popular way to copy files and share files among your devices.
    https://www.dropbox.com/
    "Box lets you store all of your content online, so you can access, manage and share it from anywhere. Integrate Box with Google Apps and Salesforce and access Box on mobile devices" Rated the most secure cloud storage by SkyHigh Networks.
    https://www.box.com/
    Using iTunes to transfer files:
    http://support.apple.com/kb/HT4094?viewlocale=en_US&locale=en_US
    Files Connect -- "Cloud Storage services like Dropbox, MobileMe iDisk, Google Docs/Picasa, Facebook photos, FTP, SFTP, WebDAV ... AFS (Apple File Shares) SMB (Windows shares)  protocols"
    https://itunes.apple.com/us/app/files-connect/id404324302?mt=8
    Windows File server
    http://itunes.apple.com/us/app/filebrowser-access-files-on/id364738545?mt=8
    "The kiteworks mobile file sharing solution provides secure creation, viewing, and sharing of enterprise content on smartphones and tablets while providing IT and security teams the administrative controls to manage user privileges and access rights necessary to ensure enterprise security and compliance."  " Includes choice of private cloud on-premise."
    http://www.accellion.com/solutions/mobile-enablement/mobile-file-sharing
    "Dukto is a simple application that allows you to share files between devices connected to the same (wireless) LAN network."
    http://www.tidal.it/?page_id=309&lang=en
    http://www.msec.it/blog/?page_id=11

  • Since upgrade to iOS 7 Email error on over 100KB emails "Cannot Send Mail  The message was rejected by the server because it is too large." Connecting to Exchange via Activesync

    Hi,
    Following the upgrade to iOS 7.0.3 on all our iPhone and iPad devices, it has been identified that when sending emails around 100KB in size and over an error message appears on the device stating “Cannot Send Mail  The message was rejected by the server because it is too large.” See error message below. The send/receive limit is over 10MB so this is not the issue.
    We are in an Exchange Environment using Microsoft Activesync. This issue is not evident in iOS 6. This has been tested on an iPhone 3GS running version iOS 6.1.3. We have been unable to repeat the issues seen on iOS 7 on the older OS. It is not possible to roll back to the older operating system as Apple are no longer signing the software.
    We use Microsoft Active Sync to connect to our Exchange servers through a TMG. The issue is very inconsistent, some identical emails go through, some fail. This is not an issue with the send/receive limit as this is over 10MB. The error message when it fails on the TMG is Status: 413 Request Entity Too Large, which we believe is from IIS on the CAS server.
    Does anyone have any suggest course of actions to take?
    Many Thanks

    This resolution have to attend at the server not with the ios device. My employer's mail administrator reject me to correct it from the server. As his concern is, if ither ios devices works why don't mine? So I am helpless than changing my iphone. It works fine for early versions of ios and with androids. And also one of my friends iphone4 with ios 7 (similar as mine) works too. So I guess it's something wrong with my iPhones settings. But basic question I cannot understand is it works in my phone before this ios7 upgrading. And currently working with my yahoo account too. Favourable reply expected.

  • TS1702 cannot send Mail   The connection to the outgoing server failed.  Additional Outgoing Mail Servers can be configured in Settings Mail, COntacts, Calendars

    Cannot send outgoing messages from my IPhone.  Receive the following message: 
                   Cannot Send Mail
                   The connection to the outgoing server"[email protected]" failed.  Additional OUtgoign Mail Servers can be configured in Settings> Mail, Contacts,                Calendar

    See here for troubleshooting the SMTP settings (outgoing mail server on your carrier's servers)
    http://www.apple.com/uk/support/iphone/mail/
    Often removing a mail service from iPhone and resetting works

  • IPhone message. "Cannot Send Mail"  "The connection to the outgoing server.

    It states:
    "Cannot Send Mail" "The connection to the outgoing server "(null)" failed."
    This is the error I get attempting to send Yahoo mail using EDGE network on at&t.
    I would guess that only 2-3 emails out of every 10 go through. The rest get the above error message.
    Please help if you can.
    Thanks

    Well, if your on ATT Yahoo. The settings are as follows, and I've had luck both sending and recieving with these settings.
    Incoming Mail Server
    Host Name: pop.att.yahoo.com
    User Name: *****@sbcglobal.net (or whatever your ATT domain might be)
    Password: Required
    Outgoing Mail Server
    Host Name: smtp.att.yahoo.com
    User Name: ****@sbcglobal.net (or whatever your domain happens to be)
    Password: Optional (I left mine blank)
    Under Advanced
    Deleted Messages: Remove After ? (Your Choice)
    Incoming Settings
    Use SSL : On
    Authentication: Password
    Delete from Server: Your choice
    Server Port: 995
    Outgoing Settings
    Use SSL: On
    Authentication: Password
    Server Port: 465
    I've taken these setting from my phone. I can't remember all the domain names for the ATT Yahoo, but I know sbcglobal is one, and I believe attglobal is another. Also to change the ports under advanced, though you shouldn't have to, simply click the port area and a keypad will come up below. You can type the port number there.

  • TS1398 My iPad cannot  send mail - the connection to the outgoing server failed

    My iPad cannot send mail - the connection to the outgoing server failed.

    Go to the email settings, and re-enter your Outgoing Server username and password.
    Have you changed that recently, perhaps on the Incoming Server but not on the Outgoing server?

  • TS3276 Cannot send mail from my iPad...."user name and or password is incorrect"......mail can be sent from my iPhone

    Why do I get the message   "Cannot send mail, the user name and or password for my email outgoing server is incorrect"?  I use the same account, etc. on my iPhone and haven't any trouble sending mail.

    If your email requires a password for the SMTP server you can set it up in the settings in the General mail setup. Some i.e Gmail require a password for SMTP.
    Otherwise you will probably get better answers in the iPad forum.
    https://discussions.apple.com/community/ipad/using_ipad

  • I have a macbook (late 2011). I have a yahoo and gmail act.'s configured wrong in mailbox. Every time I attempt to send, the email comes back stating that yahoo cannot send with the server. I have changed things around to no avail. Please advise.

    I have a macbook pro (late 2011) OS X Yosemite 10.10. I have 2 acct.’s set up in mailbox, Yahoo and Gmail, but it will not send. The message comes back stating that Yahoo cannot ‘send using the server’....I have manipulated things around but to no avail. Both acct.’s receive, but will not send. Can someone provide some answers? Thanks.

    Hi whineyfromleessummit, 
    Thanks for visiting Apple Support Communities. 
    It sounds like you're not able to send email from Yahoo or Gmail on your MacBook Pro. 
    There could be several causes of the behavior. I would start with the troubleshooting steps in the "Mail Connection Doctor shows one or more red dots in the account Status column" section of this article:
    OS X Mail: Troubleshooting sending and receiving email messages
    This article contains a variety of steps that can help resolve an issue like the one you're seeing. 
    All the best,
    Jeremy

  • TS3276 I cannot send mail. I have logged into my SP through the internet and have no problem I have tried to rebuild the inbox and it just flashes very fast - to fast to view the activity. The mail doctor shows all green lights.

    I cannot send mail. I have logged into my SP through the internet and have no problem I have tried to rebuild the inbox and it just flashes very fast - to fast to view the activity. The mail doctor shows all green lights. This started after I disabled ICloud. I had to disable ICloud as I was not receiving all my mail.

    I cannot send mail. I have logged into my SP through the internet and have no problem I have tried to rebuild the inbox and it just flashes very fast - to fast to view the activity. The mail doctor shows all green lights. This started after I disabled ICloud. I had to disable ICloud as I was not receiving all my mail.

  • TS3276 i cannot send mail in outlook or the mail app; my account is roadrunner.

    I cannot send mail in outlook or on the apple mail app; my account is through roadrunner.  I receive mail no problem.

    Read the threads over in the "More Like This" column over here.----------->
    Have you contacted Roadrunner and Outlook tech support?  If not, why not?

  • TS3276 I cannot send mail but i do receive it

    I cannot send mail but do recieve it, what do I write in Imap path prefix?

    Oh, its not as "strange" as you might think.
    The problem is SPAM.  Internet Service Provider (ISPs) are struggling to prevent outsiders - or their own customers - from sending huge amounts of SPAM.
    To do this, they have to make regular changes to how e-mail is handled.  My guess, based on what you have told me so far, is that your ISP has made a change to how e-mails are sent.
    This means you have to find out what that change was and adjust your Mail account settings.  Hopefully your ISP has a "Support" web page where there is a step-by-step How To document that will lead you through this.

  • Getting message cannot send mail check server setting

    Trying to get email to send out, but getting a message saying cannot send...check outgoing server setting...
    Anybody???
    Penni

    Do you have any other mail accounts on your iPad? If so you can select another server from the options.
    Go to settings again and select Mail, Contacts, Calendars. Then select your mail account from the window on the right side. Then tap on the email address of the account to open the next window that shows the account information. Then there should be heading titled Outgoing Mail Server. You can tap the arrow to the right of the server name in that field to get to the next window that shows other servers. Try to select one from there and see if that works.
    I keep forgetting about this as well. It has provided help to others.
    http://mail.google.com/support/bin/answer.py?answer=77702
    Message was edited by: Demo

  • I had a power failure 2 days ago, have power now, but cannot send email from my iPad. Everything was fine before that. The box says cannot send mail, the user name or password for Gmail is incorrect. I haven't changed anything. I need help. Thanks

    Hi
    I had a power failure 2 days ago, my computer is running again, but now I cannot send email from my iPad using Cox or my gmail account. I am receiving mail in my Cox account but not my gmail account.It was working fine until the power failure. It keeps telling me, the user name or password for Gmail is incorrect. I have not changed anything. I don't know what is wrong. Can anyone help me? Thanks

    I agree, unplug and replug your router, then reset your iPad by holding down the sleep and home buttons, ignore the red power down slider, and wait til you see the silver apple. let it reboot and then try your connection.
    Chances are rebooting the router will help. You may also need to talk to cox. They may need to reset something on their end.

  • E-mail error:  Cannot Send Mail:  The sender address was invalid

    I can receive e-mail but cannot send it. Everything goes to my outbox. I did not change any settings. Nothing has changed that I know of. For months I could send e-mail -- now I cannot. I even e-mailed myself, and it says the sender address is invalid. Can anyone help? Thanks!

    The "Recipient addresses are invalid" message is misleading.
    Most ISP's don't allow you to send email through their SMTP server unless you are A) on their network (e.g. connected via wi-fi to a cable connection provided by your ISP) or B) you authenticate to their SMTP server.
    On Blueyonder here in the UK (my ISP), you can send via their SMTP server from the iPhone over 3G as long as you authenticate to it. I setup my Mac mail to authenticate on outbound email sent via smtp.blueyonder.co.uk and it works fine. I then synced the mail settings to my iPhone and it works fine (although a little slow to send).
    Alternatively your cellular provider usually runs their own SMTP server to which you will also have to authenticate, and you can send through it. For the iPhone in the UK O2 are the exclusive provider, and they have the smtp.02.co.uk gateway.

Maybe you are looking for

  • Email language problem

    Hi guys,  I have a small issue with my nokia n8 after upgrading to belle.  it seems everything works just fine except, my email client which is now in Chinese... The sistem language is English and everything is in english, except for the mail client.

  • What are the clustering 'gotcha's' - Anyone got a list?

    We plan to implement a very high load website using ColdFusion enterprise. Before we start coding we'd like to know what the various 'gotchas' are, unfortunately so far all we found in the docs and various sites are 'quick mentions' of this and that

  • Hyperion Financial Reporting: Trial Balance Report

    Hi All, I am a beginner in Hyperion Financial Reporting. I am trying to create a report for Trial Balance accounts. The report should have the all the accounts in the rows and two columns with DEBIT and CREDIT without any other dimensions in the colu

  • Choose a file and upload... impossible on iPad2

    Choose a file and upload seems impossible on my iPad2.... No flash is also a problem I think to purchase an Acer Tablet in Windows 7 to avoid the suprises of altnative OS.... Andre / Belgium

  • I can't execute java program.

    when we execute our java application, we met this fatal error. my environment of execution are - used jnlp(webstart) - swing program - JRE (1.6.0_22-b04) when it happened error, it created hs_err_pidxxxx.log file.(xxxx means sequence). of caurse, we