TS3276 I keep getting messages like this when I am trying to send email. This just started happening today and nothing has changed in my mail setup. VERY FRUSTRATING. Any ideas?
SMTP error from remote mail server after initial connection:
host mx0a-00004901.pphosted.com [67.231.144.212]:
554 Blocked - see https://support.proofpoint.com/dnsbl-lookup.cgi?ip=216.70.64.79
I'm sure someone will give more detail, but it looks like the server blocked your address because it thinks it's a spam source. If you're not spamming, then it might be someone on the same network spamming, or malware on your computer doing it. Or it could just be a mistake. try calling whoever runs your mail server and see if they can give you more information.
Similar Messages
-
When I try to open a file in photoshop CS, Elements or Lightroom I get the message "Could not complete request because it is not the right kind of document" This just started happening today. The only thing I have done differently is change my file handling to raw + jpeg on my Nikon 7100.
I downloaded camera raw 8.7 and I am now able to open my raw and jpeg files. Thanks
-
I keep getting an "unknown error" when I am trying to install an app. After I have put my correct apple ID in.
First, turn off your CAPS lock. Typing in all CAPS is considered screaming/yelling and many will simply ignore your posting.
Are you currently having issues? Is it when trying to purchase only on the device? Are you able to complete purchases via iTunes on your computer? -
I have tried to download a digital copy that came with a movie I purchased and I keep getting the an error about HD purchase vs. SD purchase. I push redeem again and it has the same message and I cant download the movie. What can I do?
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
I get message Time Machine couldn't complete the backup to MybookLive The backup disk image Volumes/TimeMachine RobertFurlong's Computer(2).sparsebundle is already in use.Any ideas?.
I have experienced the same problem on a MB Pro 2011 and a 2013 MBAir both with updated OS's. OSX10.9.3. WD MYBookLIVE 3Tbyte. I have found the only solution is to reboot the WD device thru Western Digital's software that you can access via the IP address for the WD device. For example, if you type the WD backup device's IP, like ... "125.261.1.38 " in the Safari address bar, WD has built-in software the runs a program that allows you access to the WD unit to maintain it, turn it off, reboot it, partition it, etc.
Doing this, I believe disconnects or ?dismounts? the WD from TM and resets everything. It works most times, not always, Sometimes you need to reboot the Mac too.
I'm more interested in what is causing this frequent failure on the WD. It happens to me several times per week. I suspect, network failures or improper disconnections between WD and the Mac (not caused but the user) are the culprit but I haven't seen any blogs on a permanent fix. Spent hours on the phone with WD techs; they were clueless. I found the "fix" myself.
Further, I often get an associated reply to "dismount the WD" with the "sparse bundle.XXX is in use" error. But when I go to Finder or Disk Management to find out what's mounted on the Mac, the WD is never mounted, even when the TM backup is working properly. I find the WD device under SHARED in Finder. Its never mounted, so I can't dismount it. -
"Your session has timed out, try again." is the message I get every time I try to purchase a song. My last purchase was june of this year, and nothing has changed since then.
I had this problem, but it was because I was clicking on an external link. Try instead going straight into iTunes, then going to the Podcast section. At the bottom of the "Podcast Quick Links" section, there's a text, "Submit a Podcast." Click on this instead. Once I did, I got to the same page as before, but it did process the feed.
Good luck! -
the back button no longer works. I have disabled all add-ons,rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
*Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
Another possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file -
my iPhone stopped making sounds - can't hear the music on the speaker, no click sounds when I type, nothing. Just started happening today, was fine earlier. any ideas?
Hey Uttej Shas!
I have an article fro you that can help you troubleshoot this issue with your iOS device:
iPhone: Receiver and call audio quality issues
http://support.apple.com/kb/ts5196
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
i can't see apple tv on my screen? i'm not sure if this is an apple tv issue or a tv setup issue? (although it appears nothing has changed on my tv setup since the last time i used it?)
As far as the flashing question mark and globe icons are concerned, your computer had lost track of its startup volume and was searching through the possibilities. The globe icon indicates that it is looking for a network to start from and the question mark indicates that it is looking for an OS X volume. To fix this, if you haven't already, go to System Preferences > Startup Disk and reselect your internal HD as the startup volume.
From what you have described, this issue does seem to have corrected itself, and the faster start up is what one would normally expect. I think that you have absolutely no reason to reinstall your system. -
i forgot my pass code my home button doesnt work i cant restore because find my phone is on im frustrated and out of solutions my home button just stopped working today and it has just been one issue after another this morning help help help
If you are unable to restore your iPhone with iTunes without having to enter the passcode, you will not be able to update your iPhone's backup. You will need to place the iPhone into recovery mode in order to restore the iPhone with iTunes and you can restore from the most recent backup available.
http://support.apple.com/kb/ht1808 -
i can't burn cd's in iTunes anymore. I get error code 4450 when I'm trying to burn a playlist. Songs from my own cd's, or bought in iTunes (have not burned 7x's as I can't BURN any cd's at all!), Then my cd gets stuck in the drive. and it says "cancelling burn" forever and then itunes freezes up. I have a Dell with Windows 7.
-I've slowed down the burn as slow as it can go
-I have bought 3 different brands of cd's
-i have the latest version of iTunes.
Can someone help me?I have Windows 7 on a Dell. Open and play iTunes in the compatability mode and use Windows XP (service pack 2). Disregard any messsages to disable the compability mode. This has worked for me. I have also reinstalled iTunes and played with burn speeds etc. These ideas did not work. Compatability mode works.
-
This message just started happening...I use IE as well and have no problems.
I prefer Firefox and I hope you can resolve this.Who is your Internet Service Provider...?
Do you have any computer which is able to go online wirelessly...?
Have you forwarded any ports on the router...?
Try to adjust the wireless settings on the router and check...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
Under the Wireless tab,Change the SSIS(Network Name) to some unique name.Change the Channel Width to 20MHz only and Channel to 11,click on save settings.Under the Wireless Security subtab,Change the Security to WEP and type any ten digit number in key1 as the network security key,click on save settings..Under the Advanced Wireless Settings,Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
Also,for the gaming system,check this link. -
When I play Flash videos, i.e. YouTube, the sound is barely audible. I have to crank my speakers way up to hear anything. When I open the same video in IE or Chrome, I don't have that issue, the sound is normal. This just started happening about a week ago, and I have the latest plug-in. I also only have one version of Shockwave on my plug list.
Try to clear the Flash cookies and settings.
Flash Website Storage Settings panel:<br />
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html<br />
<br />
See also Flash Local storage settings<br />
http://www.macromedia.com/support/documentation/en/flashplayer/help/help02.html<br /> -
Every time I try to login to My Medicare. gov I keep getting this message "The page you are trying to view cannot be shown because the authenticity of the received data could not be verified." I have used this site many times before but today I keep getting this message. I cleaned out my cache but I continue to get this message. I can login using anouther web browser, but not on Foxfire.
Hi,
The message is universal for everyone. Even I get that message. You just have to wait for it to be back up. There's nothing we can do to fix that error as it's over on Medicare.gov's end. -
Keep getting message that the product I am trying to load is not an Adobe Genuine Product
I keep getting a message that says Installation failed. The product you are trying to load is not a Adobe Genuine Product and appears to be counterfeit!!!?? What do I do next? The products were purchased from Adobe
All;
I'm still working with Adobe; however, I may have a unique problem as
explained by Adobe Support: I purchased what is known
as a one user License of a Volume License from a supplier for a CS6
Upgrade from CS5. I had purchased the CS5 direct from Adobe and this is
considered to be a Retail version and not a Volume Licensed product. Adobe
says that you need to upgrade from a licensed version to a licensed
version. They provided me with a link and instructions to upgrade from my
retail version; however, so far it is not installing with the serial number
that was provided. I will contact Adobe next Tuesday after the holiday and
see if the problem can be resolved.
I don't know if this helps you or not. I will try to give you updates.
Regards;
Bob J.
Maybe you are looking for
-
Want to make a bootable disk, but...
Recently survived a minor nightmare of "losing" my hard drive. With disk warrior managed to get back in business. But I realized I really need a way to boot up from a backup. I'd prefer to use a thumb drive. I have Super Duper (supposedly bootabl
-
Does anyone know if a lightning 30-pin apdater works with the new iPad?
I have a Philips Fidelio DS9000 and the new iPad doesn't fit! Apparently a 30-pin adapter will work (according to Philips), but on the Apple site it doesn't say if this pin is compatible with a new iPad. Please help! Thanks.
-
ITunes 11 not recognizing my iPhone 4S?
I'm using Windows 8 and just updated to iTunes 11. When it didn't recognize my phone, I tried updating to iOS 7, restarting the phone, restarting the computer...NOTHING has worked. This isn't like the people getting crashes--iTunes doesn't even know
-
Extracting audio from short clips
My previous post/question seems to have disappeared so I apologise for a repeat: I'm noticing (and this started happening just recently) that it takes now about 10 minutes to extract audio from even very short clips (10 seconds long, say). It used to
-
No Extended warranty for HP printers in Canada!
I contacted HP to purchase an extended warranty for a newly purchased printer, since we do not have a long warranty on HP A-I-O products. I was ready to spend money on purchasing a 3 year extended warranty, but to my surprise, it is not available out