TS3276 Mail import just stops after about 180 - 250 Mails! What's wrong?

I just bought a new Macbook and used Migration Assistant to get all my files from my old to my new one.
Now, when I open Mail it tells me that it needs to import my e-mails (which is good, I want it to do that).
I know that all my mails are on my computer, I can see the files in the library.
BUT: The import starts, goes on for a couple of seconds until about 200 Mails (out of 12000) are important and then the number just doesn't go up anymore. Only the remaining time keeps going up and up. What is wrong? What can I do?
Thanks

Lots to be excited about. BUT...Just updated to 8.1 on one of my computers to test it out...
Sadly, the following issue is NOT fixed for me. Is it with new projects only? I haven't started a new project on 8.1 I've only opened an old project but the issue that I'm referring to which involves also a delay/freeze of anywhere from a few seconds to a MINUTE while the render bar goes from yellow to red and then back to yellow is still there. Boo.
On the list above...
Switching between sequences can turn the render bar red.
This issue is incredibly easy to replicate. I really do hope it gets fixed. Here are the steps:
1) Create two sequences with multiple short clips (the more clips the better)
2) Make sure GPU acceleration is enabled.
3) Add warp stabilizer to the clips in both sequences. Again, the more clips the longer the delay/freeze will be as the render bar goes from YELLOW to RED and then eventually back to YELLOW again.
4) Hit SAVE.
5) Now, toggle between sequences. You'll hit a short delay with a few clips stabilized and a LONG delay with lots stabilized. In my case this delay is around a full minute. The render bar will go from YELLOW to RED and then back to yellow...eventually.
6) Toggle back to the original sequence and the delay occurs again.
7) Once you've toggled between sequences and have gone through this delay, that's it, there is no longer a delay...UNTIL...(and here's the big kicker)...until the project is SAVED again. After that the issue returns when you toggle between sequences. Both saving manually and AUTOSAVING cause this issue. No way around it except not editing with GPU acceleration.
Not sure what the issue is...caching issue when saving maybe? Either way, it stinks and it's still there in 8.1. Big bummer.
Again, lots to be excited about with this release but I really was hopefully this specific issue was resolved.
Sigh.

Similar Messages

Audio streaming stops after about 13 minutes.

Audio streaming over the Internet just stops after about 13 minutes and has to be restarted. I need a solution

Thanks for your help! You helped solve the issue, albeit indirectly...
At this point, I want to share my experience, in the hope that it might be helpful to others:
After finding that chapter markers had nothing to do with the problem, I found that indeed my camcorder was set to the dreaded 12 bit. Oh dear! The original DV tape is long gone. (At first I did not expect this to be a problem, since I had made several DVDs successfully with the existing settings, but then there are all these horror stories in discussions about what 12 bit can do to you.)
So to rescue my movie, I found advice to "share" my iMovie back to a fresh DV tape, and then re-import it with the 16 bit setting.
This lead to the next issue: After a number of minutes of re-exporting to DV tape, the video received by the camcorder would freeze, while the audio continued. This happened at several different points in several differerent attempts.
So next I visited iMovie discussions, where I found advice to clean up my Mac. I used Mac Sweeper, and now indeed my Mac runs faster and smoother for many apps. I also downgraded my QuickTime version. But another attempt of exporting from iMovie to DV tape also failed, but now it failed at exactly the same point where the audio stopped in my DVD!!! (Even though on the export-to-DV-tape it was not the audio but the video that froze.)
Next I found that when playing that problematic scene in iMovie, the iMovie program would also freeze at that very point, making it necessary to "force quit" out.
In the end the solution was to chop out the problematic bit in that scene. Now everything works fine, including the iDVD step.

Playback in Preview window stops after about 1 second

Hi,
When I hit the spacebar to view the clip in the preview window, the playback stops after about one second each time. It goes smoothly, then after one second, it stops. I can however drag the slider across the time line and there seems to be no problems.
I'm sure I have a powerful enough computer, so I don't think it's something to do with ram (I have 6 gig ram, Vista, triple core processor, good graphics card... brand new computer bought yesterday)
I'd appreciate help with this.
Thanks!

I'm not sure what you mean... I am importing from a DV tape which was recorded onto by a MiniDV Camera. When I plug in the camera to my fire wire, Windows gives me the options of AVI and WMV format (I am not sure which one to go with by the way, but WMV format seems clearer and 5 times smaller too.. why is that?)
Any ideas?
Thanks again
EDIT: Also, I borrowed some video files on the net and premiere does the exact same thing- stopping after one second :/

Flash videos stop after about a second of playback ?

ANY flash videos that are played inside Internet explorer OR
firfox stop after about a second of playback, I can drag the slider
to the middle of the video and it will play for another second then
stop. Can anybody HELP. PS I also have NO sound in any FLASH stuff
since installing flash player 9. ALL other video's (WMP,MOV,RM)
play OK WITH sound

Hi ATR
Thanks for the advice and ideas.
I think that the vertical white line basically just shows where the mouse pointer last was relative to the time line, and if you move it from the editing window to the viewing window, it retains its last known position on the time line.
None the less - I implemented your suggestion.
Even if I move the clip further down the timeline, the playback stops about 1-4 secons after I hit play. Even if I move the clip 60 seconds back from the starting line, playback stops while the the playback position is running through the empy space prior to reaching the new starting time of the clip.
If I move the blue cursor that shows the current playing point to anywhere else in the clip, it plays for about 1-4 second and then freezes as before.
Clearly the playback freezes regardless of where it is in the content stream.
I have also discovered a new unexpected feature... The problem seems to be intermittent - if I open a few other clips, and play them, and return to the previous clip, it may run for some time and then freeze. After it has then frozen once, it freezes consistently after 1-4 seconds.
It is also worth noting that it freezes in quick mode too, regardless of timelines.
So there you have it - an intermittent issue.
I have bad to use iMovie in the meantime, which works without issues.
It is beginning to look like a bug in the application...
Thanks again for your suggestions.
Regs
FF

When I play songs on my itunes account, they stop after about one minute and itunes goes to the next one. how do I fix this? These are songs in entire albums that I have purchased.

when I play songs on my itunes account, they stop after about one minute and itunes goes on to the next song. This is happening with songs on albums I have purchased direclty through itunes

Assuming you are in a region where you are allowed to redownload your past music purchases, delete the broken files from your iTunes library, go to the iTunes Store home page, click on the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
If you don't see them straight away it may help to close and restart iTunes.
While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unticked.
If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
See also: HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
tt2

Recorded FLV just stops after a random time

Hello:
I have some long (1 hour or so) flvs recorded from a small
flex app communicating with FMS 3.0.0. It is mostly audio.
When replaying them from
- a client Flash OR from (Method A)
- FMS and then have a Flash client connect to the FMS Live
stream (Method B)
The stream just stops after a while (variable: could be after
2 minutes or 20 minutes). It is very reproduceable which makes me
wonder how come others are not getting this as a google search does
not show other complaining.
I get an Unpublished and then Stop status on the Flash Player
for the stream.
Strange thing: If I play the stream direct from a player
(Method A above), then the higher the BufferTime and the longer it
takes to stop. With a buffer time of 5 seconds, it plays without
stopping.
I actually need to run it with Method B. Setting all kind of
buffers on the server produces no noticeable results.
Any idea?
I can send you my simple test codes for Flash player, FMS and
the flv if need be.
Thank you

quote:
Originally posted by:
peterflex
The stream just stops after a while (variable: could be after
2 minutes or 20 minutes). It is very reproduceable which makes me
wonder how come others are not getting this as a google search does
not show other complaining.
I get an Unpublished and then Stop status on the Flash Player
for the stream.
Were you ever able to solve your problem? I have the same
issue. Thanks,

TS1550 using Seagate 2.0 Go Flex .... initial back up just stops at about 2gb .... no message, just stops! any help out there??

Using Seagate 2.0 Go Flex .... initial back up just stops at about 2gb .... no message, just stops! any help out there??
I've done the reformat thing .....

On another post I saw the suggestion to download EasyFind and use that to search for any Seagate software on my Mac and then remove it.
I did that, removed anything that even mentioned Seagate and .... it worked!
It has been working fine all day and allowed me to shut down the computer without freezing.
So ...... so far so good.
If anyone is about to use a Seagate GoFlex then don't download any of their software!!!

TS3700 After synched with PC, verified song played perfectly at PC. Once played IPOD NANO by itself, song stopped after about one minute. Happens to every song. Why?

After synched with PC with all songs transferred via iTunes, I verified all songs played perfectly at the PC. Once played IPOD NANO (6th generation) by itself, the song stopped after about one minute. This happens to every song. Why? I checked the IPOD NANO setting, but do not see anything need to be changed.

After synched with PC with all songs transferred via iTunes, I verified all songs played perfectly at the PC. Once played IPOD NANO (6th generation) by itself, the song stopped after about one minute. This happens to every song. Why? I checked the IPOD NANO setting, but do not see anything need to be changed.

Okay, let's say you bought an album and there are a few songs on there where you only have half the song(the song just stops after a number of minutes/seconds). What do you do, and can you re-download these songs?

Okay, let's say you bought an album and there are a few songs on there where you only have half the song(the song just stops after a number of minutes/seconds). What do you do, and can you re-download these songs?

How to report an issue with Your iTunes Store purchase

HT1277 my mail will not open after I click on mail.when I try to shut down my laptop ,it wouldn't telling that mail is preventing the computer from shutting down,asking to quit Mail and when I do mail dose not quit

my mail will not open after I click on mail.when I try to shut down my laptop ,it wouldn't telling that mail is preventing the computer from shutting down,asking to quit Mail and when I do mail dose not quit

Mail is open but it is frozen, being this the reason why you cannot open the Mail window. Press Alt, Command and Esc keys or go to  > Force Quit, select Mail and force quit it. Finally, you will be able to turn off or restart the MacBook

Late sleep on MacBook Air, it must be the very long list of history in repair permission that how many times I repair it, when it's done, I do it again, suddenly it's a long list again, all about iTunes. So what's wrong with this iTunes 11.10.

I predict something is going wrong because of the list history in verify permission disk. after I repair them for a few second , I do it again and also found that long list again..They are all about iTunes. So what's wrong with it. Thanks.

As long as the report ends up with 'Permissions repair complete' then, as far as permissions go, you are fine. You can ignore the various statements in the report:
Permissions you can ignore on 10.5 onwards:
http://support.apple.com/kb/TS1448
Using 'should be -rw-r--r-- , they are lrw-r--r--' as an example, you will see the that the permissions are not changed, but the | indicates a different location. This is because an update to Leopard onwards changed the location of a number of system components.
Poster rccharles has provided this description of what it all means:
drwxrwxrwx
d = directory
r = read
w = write
x = executeable program
drwxrwxrwx
| | |
| | all other users not in first two types
| |
| group
|
owner
a little more info
Before the user had read & write. A member of the group had read.
After, only the user had read & write.

My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

I tried this and still have the same problems. If I open Address book or the Mac App Store I get the library rebuild popup and a hang. I created a fresh user and then things are better apart from the printing issue. Its clearly some 3rd party software issue but the crash logs are meningless to me. I used the excellent Etre check app from http://www.etresoft.com/etrecheck so I have a list of what is being loaded and can compare clean and crashed user info but as I cant work out which of the startup items, launch agents, launch daemons etc that are causing the problem.
I have eliminated Dropbox, Mac Keeper and Witness, and it isnt related to my exterrnal LED cinema dispay or my external thunderbolt drives, or any USB devices if thats any help to anyone else. Info from Etrecheck follows -
Kernel Extensions:
          com.oxsemi.driver.OxsemiDeviceType00          Version: 1.28.7
          com.rogueamoeba.InstantOn          Version: 6.0.2
          com.rogueamoeba.InstantOnCore          Version: 6.0.2
          com.Cycling74.driver.Soundflower          Version: 1.5.3
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
             [not loaded] com.adobe.fpsaud.plist
             [not loaded] com.adobe.SwitchBoard.plist
             [not loaded] com.bombich.ccc.plist
             [not loaded] com.dymo.pnpd.plist
             [not loaded] com.intego.BackupManagerPro.daemon.plist
             [not loaded] com.micromat.TechToolProDaemon.plist
             [not loaded] com.microsoft.office.licensing.helper.plist
             [not loaded] com.orbicule.witnessd.plist
             [not loaded] com.sierrawireless.SwitchTool.plist
             [not loaded] com.stclairsoft.AppTamerAgent.plist
             [not loaded] org.macosforge.xquartz.privileged_startx.plist
             [not loaded]          pcloudd.plist
Launch Agents:
                 [loaded] com.divx.dms.agent.plist
                 [loaded] com.divx.update.agent.plist
                 [loaded] com.epson.epw.agent.plist
                 [loaded] com.lacie.raidmonitor.daemon.plist
                 [loaded] com.lacie.safemanager.daemon.plist
                 [loaded] com.micromat.TechToolProAgent.plist
                 [loaded] com.orbicule.WitnessUserAgent.plist
                 [loaded] org.macosforge.xquartz.startx.plist
User Launch Agents:
             [not loaded]          .DS_Store
                 [loaded] com.adobe.AAM.Updater-1.0.plist
                 [loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
                 [loaded] com.digitalrebellion.SoftwareUpdateAutoCheck.plist
                 [loaded] com.divx.agent.postinstall.plist
                 [loaded] com.google.keystone.agent.plist
                 [loaded] com.propaganda.dejavu.dvmonitor.plist
                 [loaded] com.valvesoftware.steamclean.plist
                 [loaded] com.zeobit.MacKeeper.Helper.plist
User Login Items:
          iTunesHelper
          Synergy
          TomTomHOMERunner
          Dropbox
3rd Party Preference Panes:
          Déjà Vu
          Flash Player
          Flip4Mac WMV
          GR-55
          Paragon NTFS for Mac ® OS X
          Perian
          Printopia
          TechTool Protection
          Witness

My iMessages freezes when it gets through about 90% of the loading bar. Then the message doesn't send at all. My iPod's only about 2 week old, what's wrong and how can I fix it?

My iMessages freezes when it gets through about 90% of the loading bar. Then the message doesn't send at all. My iPod's only about 2 week old, what's wrong and how can I fix it?

Maybe:
iOS: Troubleshooting Messages

Can't activate the location service on my ipad2 after upgrading to ISO7! What's wrong? Doesn't worked with the resets!!!!

Can't activate the location service on my ipad2 after upgrading to ISO7! What's wrong? Doesn't worked with the resets!!!! Can someone help please?

Hello I found my answer on Settings>>Restritions! :)
Thanks to me:)

My iPad 1 has stopped syncing with my windos computer what is wrong?

my iPad 1 has stopped syncing with my windos computer what is wrong?

Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

TS3276 Mail import just stops after about 180 - 250 Mails! What's wrong?

Similar Messages

Maybe you are looking for