TS3276 Received Microsoft Entourage 2008 error message: Entourage cannot access your data. To try to fix problem, rebuild database.

Went through the verify database integrity process which seemed Ok once the process was complete. still could not open entourage same error message. tried to compact database... an error occured with that. Now entourage will not open at all.  Suggestions?

Do not find three folders labeled Main Identity - only one Main Identity
That shouldn't be possible. You say you rebuilt the database twice. Which would have to mean you launched Entourage while holding the Option key. When you do that, you should get this utility:
This is for Outlook 2011, but the 2008 Entourage interface looks pretty much the same. Did you perhaps highlight the backed up databases in this utility and then click the minus button to remove them?
That would be one of the only ways they wouldn't exist. The other would be going to the folder in your user account where they reside and manually putting them in the trash.

Similar Messages

  • Working in Windows 8.1, trying to open Lightroom 3.6 64 bit, get the error message: Windows cannot access the specified device, path or file.  You may no have th appropriate permissions to access the item.

    Working in Windows 8.1, trying to open Lightroom 3.6 64 bit, get the error message: Windows cannot access the specified device, path or file.  You may no have th appropriate permissions to access the item.  I have changed the permissions to everyone and it doesn't work

    Any suggestions please?

  • When I try to open iTunes, I get this error message: Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item. I get a different error message if I try to uninstall it.

    When I try to open iTunes, I get this error message: "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item." I've been able to uninstall all Apple products except iTunes as I get this error message: "The Installer has insufficent privileges to modify this file: C:\Program Files\i Tunes\Acknowledgments.rtf." I've had the iTunes on my laptop for a year and a half with no problems until now.

    Any suggestions please?

  • HT1386 When trying to down load photos I get this message: iPhoto cannot import your photos because there was a problem downloading an image. What should I do to restore syncing my phone?

    I can't sync my iPhone 4 photos with my deck top. It all just stoped working. When trying to sync photos I get the following message:
    iPhoto cannot import your photos because there was a problem downloading an image.
    What do I need to do to get the syncing process back to normal?

    Hi there obywon!
    I have an article for you that can help you find some other ways to import those pictures from your iPhone onto your computer. You should try a couple of different programs that would import the photos into your computer. This first article can tell you the different programs that you will want to try when attempting to import photos:
    iOS: Importing personal photos and videos from iOS devices to your computer
    http://support.apple.com/kb/ht4083
    If you are still having issues with importing those photos, you will want to see this article for next steps on resolving this issue:
    iOS: Unable to import photos to computer
    http://support.apple.com/kb/ts3195
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Using iPhoto 11 under Mavericks and want to buy to buy a Book, I receive error message saying 'Cannot access Apple Store, try later', but I have not problem accessing store via iTunes or directly. Any advice?

    Getting error message when trying to buy my book 'Cannot access Apple Store, please try later' Anyone experienced this?

    Here's a fix that worked for some users:
    Make sure this checkbox is checked in the System/Sharing preference pane:
    If it is, uncheck it and then recheck and try ordering again.
    OT

  • I am unable to download all photos to computer.  At a certain photo I get the following message:  IPhoto cannot import your photos because there was a problem downloading an image.  How can I go around this  image

    I am unable to import all photos to IPhoto on computer.  At a certain photo the following message appears:  IPhoto cannot import your photos
    because there was a problem downloading an image.  How can I circumvent this particular image and import all other photos?

    I'm having the same issue.  i have imported everything but the offending photo from my iPhone.  problem is, with over 5000 pics, i have no idea how to find THAT ONE pic that won't import (bc I just get a greyed out pic image - with no data in iPhoto)
    any idea how to get "date taken" info of THAT ONE pic out of iPhoto (or any metadata) so I don't have to search 3 years of pictures?
    and I do apologize for hijacking.

  • Microsoft Word 2008 Error Message-Wont Open?

    Hello,
    I have a 2009 MacBook Pro, operating system OS C 10.6.8, I updated to Snow Leopard about a year ago. I tried to open my Microsoft Word (2008), and receive "Microsoft Word has encountered a problem and needs to close." With the options of Send/Don't Send and to try and reopen. It will not open. I have tried to repair the disk permissions using Disk Utility, I have also tried to Remove Duplicate Fonts as I read this may be a problem. I do not have any software updates, and I have tried restarting multiple times. Can anyone offer me some help on this issue, I don't know if I still have the disk to reinstall Microsoft OFfice.
    Thank you!

    Also, the error message says this:
    Microsoft Error Reporting log version: 2.0
    Error Signature:
    Exception: EXC_BAD_ACCESS
    Date/Time: 2013-12-01 14:41:57 -0600
    Application Name: Microsoft Word
    Application Bundle ID: com.microsoft.Word
    Application Signature: MSWD
    Application Version: 12.3.6.130206
    Crashed Module Name: Microsoft Word
    Crashed Module Version: 12.3.6.130206
    Crashed Module Offset: 0x00152a74
    Blame Module Name: Microsoft Word
    Blame Module Version: 12.3.6.130206
    Blame Module Offset: 0x00152a74
    Application LCID: 1033
    Extra app info: Reg=en Loc=0x0409
    Crashed thread: 0

  • Receiving error message -3212 cannot access ITunes store

    Just reinstalled ITunes after having to reformat my hard drive.  Now, I receive the error message -3212 when trying to access the ITunes Store.  It says that I don't have an Internet connection.  I do, however. 

    Hi RebeccaBlack,
    Thanks for using Apple Support Communities.  If you're unable to connect to the iTunes Store even though the internet connection is fine, this article may help:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Cheers,
    - Ari

  • After auto update recently, norton internet security won't work. error message:windows cannot access specified path...you may not have appropriate permissions to access item

    Firefox did an auto update and since then I cannot open/run Norton Internet Security. It won't even let me update it or re-install it. I get an error message stating Windows cannot find the specified path. You may not have appropriate permissions to access this.

    Hi
    Some required information are needed for us to help you.
    Hi NabeelOmer,
    We wonder if you have taken any action such as system restore after this issue occurred.
    You might also try this command to restore your access control list.
    Run this command to navigate to the drive letter, example is D
    D:
    To reset all permissions, run this command
    icacls * /reset /t /c /q
    Visual Studio is a very invasive program and which provides the ability to enumerate projects and solutions for system, user should never try uninstalling it manually without any guidance.
    Visual Studio made changes for your whole system, if the file has been moved or deleted this error would occur.
    Since you mentioned that you get this error almost everywhere even in control panel. We suggest you repair/reinstall your Visual Studio first and check if it could be fixed.
    How to: Repair Visual Studio
    https://msdn.microsoft.com/en-us/library/aa983433%28v=vs.90%29.aspx?f=255&MSPPError=-2147217396
    Regards
    D. Wu

  • Error Message - "Aperture cannot access this library"

    I'm using OS 10.5.7 and Aperture 2.1.3. I recently had an error message pop-up when I try to start Aperture that says, "Aperture cannot access this library. To use this library, make sure its file permissions are set correctly." Unfortunately, I can't seem to open up my library. Any ideas how to fix this or what is wrong? Thanks

    Hello,
    attached I would like to report how the problem solved.
    1. I had 63 Minute Call to Apple Support and we are tring some things. Finally I Spend spend 1 day for testing.
    2. Testing procedure:
    A) I exported each project step by step
    B) Than I deleted all appr. 50 projects in Aperture Library.
    C) After that I Imported each project to Aperture back.
    Result: 2 Project was corrupted, one of it was going well after export/import procedure how ever but the second ones error was constant appearing if I try to import it. The project consisting of 512 jpg files in total appr. 500MB.
    The solution for this project:
    I moved this jpg´s to waste bin und imported it from waste bin to Aperture again into a new project. Than I tested it again(Export/import) and it was fine.
    For final check I delete my Aperture backup und start a new one.
    Than start a compleate restoring from that last backup.
    Every thing was fine, all project include albums or books are ok.
    The pictures in the corrupted project was not imported by Aperture, they was created on a PC system(XP). Maybe that was the reason for the problem.
    A friend sad, that windows use not the agreed standard for jpg´s.
    I don´t know. So I´m happy all my books are back that is imported for a wedding photographer.
    Have fun
    bernhard66

  • I have an error message: "Windows cannot access the specific device, path, or file. You may not have the appropriate permission to access the item." I have re-installed and I have the same message.

    My husband click a disallow button that came up and now I can't get Firefox to work again. I uninstalled and re-installed, I upgraded to Windows 7 and still have the same error message.

    Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.<br />
    Don't remove personal data when uninstalling.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can skip the step to create a new profile, that is not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • When connected to wifi, I get an error message saying "cannot decode raw data"

    While I am at school, I can connect to the wifi, however I can only access google, and the apple website. When I try and google something to work on a project, I get a messgae that says "Cannot Decode Raw Data" it is getting rather annoying, and I was wondering if anyone else has had this problem. The only time I have gotten this message is while at my school, it has worked before but only started this recently.
    Is there a quick fix for this? Is it something caused by the wifi at school?
    Thanks in advance.

    While I am at school, I can connect to the wifi, however I can only access google, and the apple website. When I try and google something to work on a project, I get a messgae that says "Cannot Decode Raw Data" it is getting rather annoying, and I was wondering if anyone else has had this problem. The only time I have gotten this message is while at my school, it has worked before but only started this recently.
    Is there a quick fix for this? Is it something caused by the wifi at school?
    Thanks in advance.

  • After attempting an Itunes update to my lap top computer I received an error message and cannot access my Itunes program or library.  Is there a way to fix this without starting over?  I still have I tunes on my Iphone 6 but ut does not contain all

    Error Updating ITunes onto lap top.  No access

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the advice above doesn't resolve things you could try this alternate version:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
    Or roll back to the previous build:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    tt2

  • When attempting to download a program I get the error message, "Windows cannot access the specified device, path or file".

    The message goes on to say, "You may not have the appropriate permission to access the item".
    There are no other users, accounts on this computer. What are they talking about, I am the Administrator, operator, only user!

    I've tried all of these things. And again just to confirm. When removing Firefox from the Firewall despite the setting on it only allowing sites that are listed, still goes through, what's that about?

  • Kin 1 cannot receive texts or send text messages, also cannot access email

    I have had the kin 1 for about 3 months, it only has froze once and acted up once, but now whenever I press the messaging screen or the email it sends me right back to the main screen, same thing happens when I send a message, please help. How do I fix this?

    I agree with Baubillious ... this might require a factory reset. This will, however, erase everything ... all your photos, settings and contacts. Back up by syncing with Zune before doing a reset, but you'll have to re-enter your contacts and settings afterward, unfortunately.

Maybe you are looking for