TS3276 SMTP server not recognized

This is a new computer. I've tried ports 25, 456, 587, 993, SSL on or off. Mail download is OK.

Hard to answer without knowing who's smtp server this is.
Should we just start with A and go to Z, or will you tell us?

Similar Messages

  • Mail Problems - SMTP server not responding: "offline"

    I am currently testing DSL service for a month; set up Mail just before I downloaded the 10.7.3 release. Tested it once and it worked; did not use it to send emails since because I am only testing this (including the email address). I have been receiving emails (which I forwarded to myself from my cable provider's website); today, I wanted to send an email and a 6 hour troubleshooting saga began....
    Total of 2 hours with Centurylink tech support; 1 1/2 hours with Applecare, and another 30 minutes with Centurylink.
    During that time, all different settings were tried, turned on/off. POP server ok, SMTP server not responding. With Applecare, tried it on both the iMac and the Macbook; also tried it after booting into Snow Leopard - SMTP server not responding ("offline"). Applecare tech stated that it has to be the server since we tried it on two machines as well as SL. Centurylink insists there is nothing wrong with their server, but it's Mail's fault.
    So, I finally gave up for the evening, but wonder if there is something amiss with Mail in 10.7.3 (both machines are on the same version) and during the troubleshooting, I noticed an anomaly: in a new message window, there was no choice to choose an account to send from which I thought was odd.
    I was thinking of a new install or to clone back? My clones are up to date though, I have no older clones. I do have a fresh install but it's also the latest one from MAS. Or I could just boot from the fresh install and set up Mail to see if it would work?
    Grateful for any ideas....

    Thanks to everyone; as you can imagine, all settings/configurations were tried yesterday (even booting into SL); Apple said it's Centurylink's fault, and they insisted there was nothing wrong with their server.
    FWIW, I unplugged my Comcast cable (it is still active though and I'm getting TV reception, just unplugged the modem for now); right now, my internet access and email account are with Centurylink for the test. I still access my Comcast mail via their web interface email account.
    Anyway, thanks to a good friend's idea, I decided to check keychain access and to make it short: the issue is fixed and the problem definitely had something to do with the OS because:
    When I first checked keychain, this is what I saw:
    I then checked Comcast settings and there were two: one was checked "allow all apps..." and the other had the "confirm" with Mail listed under the applications.
    So I figured it's so screwed up, I probably can't make it any worse, so I deleted the Internet Accounts and added Mail to the smtp.centurylink...:
    And......... it then worked! These default "internetaccounts" obviously aren't being recognized by Centurylink's server?
    And, to make sure that was it, I not only did the same thing on the Macbook, but also booted into a pristine "backup" fresh install (no added apps or files, just default OS), launched Mail and couldn't send. Launched Keychain, changed the apps to Mail, and I was able to send email.
    I would call that a bug? Or not? In any case, I'll be calling back Applecare and tell them to add the above to the very long log from yesterday and to make a note that "internetaccounts" doesn't work with everything.

  • TCL SMTP server not avalable

    Hello I use SMTP notification over EEM TCL.
    All work fine. But I need found way resend email message then WAN channel was down or SMTP server not working.
    Can it possible?

    There is no built-in code to do this, so you will need to design your own solution.  It is possible to do, though.  For example, you could cache the message to a file on flash and have an EEM policy periodically wake up to see if the file exists.  If it does, try to send the email, and if successful, delete the file.

  • ISP server not recognizing mail password

    This has been going on for a couple of weeks. I get a warning that my ISP server isn't recognizing my mail password. The password hasn't changed, so I re-enter the password, check the box about remembering password in keychains. This may happen several times in one day & then it goes away for a few days ,but starts up again. It has started up again this morning x3 & I 'm at a loss as to what to do to fix it since I've only been on the Mac since last October. Thanks for any suggestions!

    Hi Debbie,
    Ernie's almost certainly right about this being an ISP-side issue. For what it's worth, I occasionally get a similar message from Entourage about 'password not recognized, do I want to try to enter it again' during the periodic (5 minutes) check of the mail server on my work Mac. If the network goes out briefly or the servers bog down (both of which our IT department swears never, ever, well hardly ever happens), the business of sending the account password to the ISP's server and getting back an acknowledgement break down. Like you, I've found that when this starts happening, I just keep trying to reconnect until it works again, after which it will typically run OK for several weeks (until the next network upgrade).

  • Java Mail,SMTP server not starting,help required urgently

    Hi i have been working on java mail .Yesterday it was working ok but today suddenely i am getting this thing.its not starting the smtp server i guess,just exiting and get the command prompt ..dont know what to do.help required how to go about this error
    am pasting the debug information.please check and let me know
    the compilation ,smtp server and others are all valid
    thanks
    Microsoft Windows XP [Version 5.1.2600]
    (C) Copyright 1985-2001 Microsoft Corp.
    C:\Documents and Settings\Pavan>cd C:\Program Files\Java\jdk1.5.0_07\bin
    C:\Program Files\Java\jdk1.5.0_07\bin>javac jdbcExample3.java
    C:\Program Files\Java\jdk1.5.0_07\bin>java jdbcExample3 smtpserver address
    DEBUG: JavaMail version 1.4ea
    DEBUG: java.io.FileNotFoundException: C:\Program Files\Java\jdk1.5.0_07\jre\lib\
    javamail.providers (The system cannot find the file specified)
    DEBUG: !anyLoaded
    DEBUG: not loading resource: /META-INF/javamail.providers
    DEBUG: successfully loaded resource: /META-INF/javamail.default.providers
    DEBUG: Tables of loaded providers
    DEBUG: Providers Listed By Class Name: {com.sun.mail.smtp.SMTPSSLTransport=javax
    .mail.Provider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsyste
    ms, Inc], com.sun.mail.smtp.SMTPTransport=javax.mail.Provider[TRANSPORT,smtp,com
    .sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc], com.sun.mail.imap.IMAPSSLSt
    ore=javax.mail.Provider[STORE,imaps,com.sun.mail.imap.IMAPSSLStore,Sun Microsyst
    ems, Inc], com.sun.mail.pop3.POP3SSLStore=javax.mail.Provider[STORE,pop3s,com.su
    n.mail.pop3.POP3SSLStore,Sun Microsystems, Inc], com.sun.mail.imap.IMAPStore=jav
    ax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc],
    com.sun.mail.pop3.POP3Store=javax.mail.Provider[STORE,pop3,com.sun.mail.pop3.POP
    3Store,Sun Microsystems, Inc]}
    DEBUG: Providers Listed By Protocol: {imaps=javax.mail.Provider[STORE,imaps,com.
    sun.mail.imap.IMAPSSLStore,Sun Microsystems, Inc], imap=javax.mail.Provider[STOR
    E,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc], smtps=javax.mail.Prov
    ider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsystems, Inc],
    pop3=javax.mail.Provider[STORE,pop3,com.sun.mail.pop3.POP3Store,Sun Microsystems
    , Inc], pop3s=javax.mail.Provider[STORE,pop3s,com.sun.mail.pop3.POP3SSLStore,Sun
    Microsystems, Inc], smtp=javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.S
    MTPTransport,Sun Microsystems, Inc]}
    DEBUG: successfully loaded resource: /META-INF/javamail.default.address.map
    DEBUG: !anyLoaded
    DEBUG: not loading resource: /META-INF/javamail.address.map
    DEBUG: java.io.FileNotFoundException: C:\Program Files\Java\jdk1.5.0_07\jre\lib\
    javamail.address.map (The system cannot find the file specified)
    C:\Program Files\Java\jdk1.5.0_07\bin>

    The debug output doesn't show an obvious problem. You're
    going to have to actually debug your program. A debugger
    might be helpful.

  • ICloud SMTP server not working on Windows Live

    I can use iCloud to read and send messages on my iPhones and using the web interface in Safari but it doesn't seem to work with Windows Live Mail. 
    I'm using the following settings:
    IMAP (Incoming Mail Server) information:
    Server name: imap.mail.me.com
    SSL Required: Yes
    Port: 993
    Username: [email protected] (use your @me.com address from your iCloud account)
    Password: Your iCloud password
      SMTP (outgoing mail server) information: 
    Server name: smtp.mail.me.com
    SSL Required: Yes
    Port: 587
    SMTP Authentication Required: Yes
    Username: [email protected] (use your @me.com address from your iCloud account)
    Password: Your iCloud password
    I can read messages in Windows Live but I can't send.  I get an error and if I click "Send/Receive", I get a window that pops up with my account username and password.  When I retype that it just keeps popping up until I hit cancel.  It's like the server is not responding at all. 
    Please help.

    Click on “Settings”
    Choose “Accounts & Sync”
    Select “Add Acount”
    You’ll be presented with a list of Email accounts. Choose “Email”
    Type in your email “[email protected]” and enter your iCloud password
    I suggest changing your iCloud password to be the same as your iCloud email password. It just makes things easier
    Under incoming settings enter the following
    “imap.mail.me.com”
    Port should be “993″
    Security type “SSL/TLS”
    Outgoing settings under SMTP server type in “smtp.me.com”
    Under Port type in “587″
    Security type, select “No”
    “Require Sign-in”
    Enter your iCloud username and password.

  • Smtp server not responding

    imsimta version:-
    Sun Java(tm) System Messaging Server 6.1 (built Apr 28 2004)
    libimta.so 6.1 (built 13:10:36, Apr 28 2004)
    When I make some changes to the imta.cnf file,
    I get the following error
    18:17:57.85: Can't find channel in table
    in the file
    tcp_smtp_server.log-*
    (this file is in the log directory)
    The result of the above seems to be that though the smtp server is listening on port 25, as can be observed from
    netstat -an | grep *.25,
    yet when I do a "telnet localhost 25", the session
    gets hung.
    I see no reason why the smtp server is not responding.
    Can you give me any possible reason for it.
    thanks,
    Kamal.

    The configuration file is as follows:-
    ! IMTA configuration file
    ! part I : rewrite rules
    ! Domain Rewrite Rules.
    ! Uncomment this line to use domain rewrite rules
    ! from the configuration file instead of the domain database.
    ! Please refer to the iMS documentation for details.
    !<IMTA_TABLE:domains.rules
    ! Rules to select local users
    $* $A$E$F$U%[email protected]
    tapti.planetasia.com $U%[email protected]
    planetasia.com $U%[email protected]
    ! ims-ms
    .ims-ms-daemon $U%$H.ims-ms-daemon@ims-ms-daemon
    ! lmtp
    !.lmtp $U%$H@lmtpcs-daemon
    ! lmtpn
    !.lmtpn $U%$H@lmtpcn-daemon
    ! native
    .native-daemon $U%$H.native-daemon@native-daemon
    ! pipe
    .pipe-daemon $U%$H.pipe-daemon@pipe-daemon
    ! tcp_local
    ! Rules for top level internet domains
    <IMTA_TABLE:internet.rules
    ! tcp_intranet
    ! Do mapping lookup for internal IP addresses
    [] $E$R${INTERNAL_IP,$L}$U%[$L]@tcp_intranet-daemon
    .planetasia.com $U%$H.planetasia.com@tcp_intranet-daemon
    * $U%$&0.planetasia.com
    ! reprocess
    reprocess $U%reprocess.tapti.planetasia.com@reprocess-daemon
    reprocess.tapti.planetasia.com $U%reprocess.tapti.planetasia.com@reprocess-daemo
    n
    ! process
    process $U%process.tapti.planetasia.com@process-daemon
    process.tapti.planetasia.com $U%process.tapti.planetasia.com@process-daemon
    ! defragment
    defragment $U%defragment.tapti.planetasia.com@defragment-daemon
    defragment.tapti.planetasia.com $U%defragment.tapti.planetasia.com@defragment-da
    emon
    ! conversion
    conversion $U%conversion.tapti.planetasia.com@conversion-daemon
    conversion.tapti.planetasia.com $U%conversion.tapti.planetasia.com@conversion-da
    emon
    ! bitbucket
    bitbucket $U%bitbucket.tapti.planetasia.com@bitbucket-daemon
    bitbucket.tapti.planetasia.com $U%bitbucket.tapti.planetasia.com@bitbucket-daemo
    n
    ! deleted
    deleted-daemon $U%$H@deleted-daemon
    .deleted-daemon $U%$H@deleted-daemon
    ! inactive
    inactive-daemon $U%$H@inactive-daemon
    .inactive-daemon $U%$H@inactive-daemon
    ! hold
    hold-daemon $U%$H@hold-daemon
    .hold-daemon $U%$H@hold-daemon
    ! part II : channel blocks
    defaults notices 1 2 4 7 copywarnpost copysendpost postheadonly noswitchchannel
    immnonurgent maxjobs 7 defaulthost planetasia.com planetasia.com
    ! delivery channel to local /var/mail store
    l subdirs 20 viaaliasrequired maxjobs 7 pool LOCAL_POOL
    tapti.planetasia.com
    ! ims-ms
    ims-ms defragment subdirs 20 notices 1 7 14 21 28 backoff "pt5m" "pt10m" "pt30m"
    "pt1h" "pt2h" "pt4h" maxjobs 2 pool IMS_POOL fileinto $U+$S@$D
    ims-ms-daemon
    ! native
    native defragment subdirs 20 maxjobs 1
    native-daemon
    ! pipe
    pipe single defragment subdirs 20
    pipe-daemon
    ! tcp_local
    tcp_local smtp mx single_sys remotehost inner switchchannel identnonenumeric sub
    dirs 20 maxjobs 7 pool SMTP_POOL maytlsserver maysaslserver saslswitchchannel tc
    p_auth missingrecipientpolicy 0
    tcp-daemon
    ! tcp_intranet
    tcp_intranet smtp mx single_sys subdirs 20 dequeue_removeroute maxjobs 7 pool SM
    TP_POOL maytlsserver allowswitchchannel saslswitchchannel tcp_auth missingrecipi
    entpolicy 4
    tcp_intranet-daemon
    ! tcp_submit
    tcp_submit submit smtp mx single_sys mustsaslserver maytlsserver missingrecipien
    tpolicy 4
    tcp_submit-daemon
    ! tcp_auth
    tcp_auth smtp mx single_sys mustsaslserver missingrecipientpolicy 4
    tcp_auth-daemon
    ! tcp_tas
    tcp_tas smtp mx single_sys allowswitchchannel mustsaslserver maytlsserver delive
    ryflags 2
    tcp_tas-daemon
    ! tcp_lmtpss (LMTP server - store)
    !tcp_lmtpss lmtp subdirs 20
    !tcp_lmtpss-daemon
    ! tcp_lmtpsn (LMTP server - native)
    !tcp_lmtpsn lmtp subdirs 20
    !tcp_lmtpsn-daemon
    ! tcp_lmtpcs (LMTP client - store)
    !tcp_lmtpcs defragment lmtp port 225 nomx single_sys subdirs 20 maxjobs 7 pool S
    MTP_POOL dequeue_removeroute
    !lmtpcs-daemon
    ! tcp_lmtpcn (LMTP client - native)
    !tcp_lmtpcn defragment lmtp port 226 nomx single_sys subdirs 20 maxjobs 7 pool S
    MTP_POOL dequeue_removeroute
    !lmtpcn-daemon
    ! reprocess
    reprocess
    reprocess-daemon
    ! process
    process
    process-daemon
    ! defragment
    defragment
    defragment-daemon
    ! conversion
    conversion
    conversion-daemon
    ! bitbucket
    bitbucket
    bitbucket-daemon
    ! deleted
    deleted
    deleted-daemon
    ! inactive
    inactive
    inactive-daemon
    ! hold
    hold slave
    hold-daemon
    thanks.

  • Backup or other smtp server not working in IOS7

    After upgrading to IOS7 on my company iPhone5 I can no longer reply to emails received on one account using "Other SMTP Server" option. (i.e. If Primary server can't be reached, it should role to Other SMTP Servers to send message. This was broken after upgrading all our work phones to the new IOS. (both 7 & 7.1)
    We still have two phones on IOS6 and this feature works fine on those operating systems
    Any help would be great!
    Thank you...

    Ok so I resolved it. I set up the iPhone from new and did NOT restore from backup. I added the apps etc back on manually.
    FaceTime worked perfectly. So I made a new backup.
    I then restored from my previous backup just to check if FaceTime might work and it failed again.
    Tried restore backup from PC and from iCloud - neither worked.
    I went back to my new backup and restored - perfect.
    My advice. Set up as new iPhone. It's a pain but not as much as not having FaceTime.

  • Mail SMTP server not accepting password. Works on all other clients.

    I am having issues with Mail and sending emails. Firstly I would like to say I have set this account up on Outlook 2011, Thunderbird and also Outlook PC and I can send and recieve with no problems.
    On Mac mail I can recieve emails perfectly.
    The account is set up with an SMTP Server. Our server requires authentication therefore I supply my username and password in there too. When I try to send an email mail says the server has rejected the password and asks for the correct password. The password I put in is correct, as it is the same password I have used on the other clients.
    So there is something that Mail doesnt like when it comes this server and I cant work out what it is.
    The only thing I thought of is that my password is all numbers. Could that make a difference?
    Any ideas?

    andrewrob,
    I had the same problem and found that I had to unlock CAPTCHA here: http://www.google.com/  accounts/DisplayUnlockCaptcha.
    This worked for me. If that doesn't work, you could try this:
    1. Open Keychain Access (located inside the Utilities folder which is inside the Applications folder)
    2. Highlight the login keychain in the white box to the left.
    3. Click the lock above it to lock the login keychain.
    4. Now unlock it.
    5. Go back to Mail and enter your password again. You will probably have to do it once for incoming mail and once for outgoing mail.
    I hope this helps!

  • SMTP Server not responding to emails sent to 1 address externally

    I've set up a mail server on a 10.4.11 machine. Everything was working fine until I accidentally deleted my personal account via Workgroup manager, I figured since it was IMAP I could just recreate it and everything would work as it once did. It didn't, now when I send emails to that address, the smtp log shows nothing, but yet I do not receive a failure message back to the sender. However, the messages sent internally from other addresses in that server work properly. In summation, I can't use an external address to send emails to one of my accounts, the smtp log doesn't even show an attempt made to connect to the server.
    Also, all the other addresses work fine.
    Here's my postconf -n:
    always_bcc =
    command_directory = /usr/sbin
    config_directory = /etc/postfix
    daemon_directory = /usr/libexec/postfix
    debug_peer_level = 2
    enable_server_options = yes
    html_directory = no
    inet_interfaces = all
    local_recipient_maps =
    luser_relay = postmaster
    mail_owner = postfix
    mailbox_size_limit = 0
    mailbox_transport = cyrus
    mailq_path = /usr/bin/mailq
    manpage_directory = /usr/share/man
    mydestination = $myhostname,localhost.$mydomain,localhost, [removed for security]
    mydomain = [removed for security]
    mydomain_fallback = localhost
    myhostname = [removed for security]
    mynetworks = 127.0.0.1/32,[removed for security]
    mynetworks_style = host
    newaliases_path = /usr/bin/newaliases
    queue_directory = /private/var/spool/postfix
    readme_directory = /usr/share/doc/postfix
    sample_directory = /usr/share/doc/postfix/examples
    sendmail_path = /usr/sbin/sendmail
    setgid_group = postdrop
    smtpd_tls_key_file =
    unknown_local_recipient_reject_code = 550
    here's my postconf:
    2bounce_notice_recipient = postmaster
    access_map_reject_code = 554
    address_verify_default_transport = $default_transport
    address_verify_local_transport = $local_transport
    address_verify_map =
    address_verify_negative_cache = yes
    address_verify_negative_expire_time = 3d
    address_verify_negative_refresh_time = 3h
    address_verify_poll_count = 3
    address_verify_poll_delay = 3s
    address_verify_positive_expire_time = 31d
    address_verify_positive_refresh_time = 7d
    address_verify_relay_transport = $relay_transport
    address_verify_relayhost = $relayhost
    address_verify_sender = postmaster
    address_verify_service_name = verify
    address_verify_transport_maps = $transport_maps
    address_verify_virtual_transport = $virtual_transport
    alias_database = hash:/etc/aliases
    alias_maps = hash:/etc/aliases
    allow_mail_to_commands = alias, forward
    allow_mail_to_files = alias, forward
    allow_min_user = no
    allow_percent_hack = yes
    allow_untrusted_routing = no
    alternate_config_directories =
    always_bcc =
    append_at_myorigin = yes
    append_dot_mydomain = yes
    application_event_drain_time = 100s
    backwards_bounce_logfile_compatibility = yes
    berkeley_db_create_buffer_size = 16777216
    berkeley_db_read_buffer_size = 131072
    best_mx_transport =
    biff = yes
    body_checks =
    body_checks_size_limit = 51200
    bounce_notice_recipient = postmaster
    bounce_queue_lifetime = 5d
    bounce_service_name = bounce
    bounce_size_limit = 50000
    broken_sasl_auth_clients = no
    canonical_maps =
    cleanup_service_name = cleanup
    command_directory = /usr/sbin
    command_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
    command_time_limit = 1000s
    config_directory = /etc/postfix
    content_filter =
    daemon_directory = /usr/libexec/postfix
    daemon_timeout = 18000s
    debug_peer_level = 2
    debug_peer_list =
    default_database_type = hash
    default_delivery_slot_cost = 5
    default_delivery_slot_discount = 50
    default_delivery_slot_loan = 3
    default_destination_concurrency_limit = 20
    default_destination_recipient_limit = 50
    default_extra_recipient_limit = 1000
    default_minimum_delivery_slots = 3
    default_privs = nobody
    default_process_limit = 100
    default_rbl_reply = $rbl_code Service unavailable; $rbl_class [$rbl_what] blocked using $rbl_domain${rbl_reason?; $rbl_reason}
    default_recipient_limit = 10000
    default_transport = smtp
    default_verp_delimiters = +=
    defer_code = 450
    defer_service_name = defer
    defer_transports =
    delay_notice_recipient = postmaster
    delay_warning_time = 0h
    deliver_lock_attempts = 20
    deliver_lock_delay = 1s
    disable_dns_lookups = no
    disable_mime_input_processing = no
    disable_mime_output_conversion = no
    disable_verp_bounces = no
    disable_vrfy_command = no
    dont_remove = 0
    double_bounce_sender = double-bounce
    duplicate_filter_limit = 1000
    empty_address_recipient = MAILER-DAEMON
    enable_errors_to = no
    enable_original_recipient = yes
    enable_server_options = yes
    error_notice_recipient = postmaster
    error_service_name = error
    expand_owner_alias = no
    export_environment = TZ MAIL_CONFIG
    fallback_relay =
    fallback_transport =
    fast_flush_domains = $relay_domains
    fast_flush_purge_time = 7d
    fast_flush_refresh_time = 12h
    fault_injection_code = 0
    flush_service_name = flush
    fork_attempts = 5
    fork_delay = 1s
    forward_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
    forward_path = $home/.forward${recipient_delimiter}${extension}, $home/.forward
    hash_queue_depth = 1
    hash_queue_names = incoming, active, deferred, bounce, defer, flush, hold, trace
    header_address_token_limit = 10240
    header_checks =
    header_size_limit = 102400
    helpful_warnings = yes
    home_mailbox =
    hopcount_limit = 50
    html_directory = no
    ignore_mx_lookup_error = no
    import_environment = MAIL_CONFIG MAIL_DEBUG MAIL_LOGTAG TZ XAUTHORITY DISPLAY
    in_flow_delay = 1s
    inet_interfaces = all
    initial_destination_concurrency = 5
    invalid_hostname_reject_code = 501
    ipc_idle = 100s
    ipc_timeout = 3600s
    ipc_ttl = 1000s
    line_length_limit = 2048
    lmtp_cache_connection = yes
    lmtp_connect_timeout = 0s
    lmtp_data_done_timeout = 600s
    lmtp_data_init_timeout = 120s
    lmtp_data_xfer_timeout = 180s
    lmtp_destination_concurrency_limit = $default_destination_concurrency_limit
    lmtp_destination_recipient_limit = $default_destination_recipient_limit
    lmtp_lhlo_timeout = 300s
    lmtp_mail_timeout = 300s
    lmtp_quit_timeout = 300s
    lmtp_rcpt_timeout = 300s
    lmtp_rset_timeout = 120s
    lmtp_sasl_auth_enable = no
    lmtp_sasl_password_maps =
    lmtp_sasl_security_options = noplaintext, noanonymous
    lmtp_send_xforward_command = no
    lmtp_skip_quit_response = no
    lmtp_tcp_port = 24
    lmtp_xforward_timeout = 300s
    local_command_shell =
    local_destination_concurrency_limit = 2
    local_destination_recipient_limit = 1
    local_recipient_maps =
    local_transport = local:$myhostname
    luser_relay = postmaster
    mail_name = Postfix
    mail_owner = postfix
    mail_release_date = 20040915
    mail_spool_directory = /var/mail
    mail_version = 2.1.5
    mailbox_command =
    mailbox_command_maps =
    mailbox_delivery_lock = flock
    mailbox_size_limit = 0
    mailbox_transport = cyrus
    mailq_path = /usr/bin/mailq
    manpage_directory = /usr/share/man
    maps_rbl_domains =
    maps_rbl_reject_code = 554
    masquerade_classes = envelope_sender, header_sender, header_recipient
    masquerade_domains =
    masquerade_exceptions =
    max_idle = 100s
    max_use = 100
    maximal_backoff_time = 4000s
    maximal_queue_lifetime = 5d
    message_size_limit = 10240000
    mime_boundary_length_limit = 2048
    mime_header_checks = $header_checks
    mime_nesting_limit = 100
    minimal_backoff_time = 1000s
    multi_recipient_bounce_reject_code = 550
    mydestination = $myhostname,localhost.$mydomain,localhost,aetkinz.com,sellwiz.biz,riflematch.co m
    mydomain = aetkinz.com
    mydomain_fallback = localhost
    myhostname = mail.aetkinz.com
    mynetworks = 127.0.0.1/32,10.0.11.0/24,192.168.34.0/24
    mynetworks_style = host
    myorigin = $myhostname
    nested_header_checks = $header_checks
    newaliases_path = /usr/bin/newaliases
    non_fqdn_reject_code = 504
    notify_classes = resource, software
    owner_request_special = yes
    parent_domain_matches_subdomains = debug_peer_list,fast_flush_domains,mynetworks,permit_mx_backup_networks,qmqpd_a uthorized_clients,relay_domains,smtpd_access_maps
    permit_mx_backup_networks =
    pickup_service_name = pickup
    prepend_delivered_header = command, file, forward
    process_id_directory = pid
    propagate_unmatched_extensions = canonical, virtual
    proxy_interfaces =
    proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks
    qmgr_clog_warn_time = 300s
    qmgr_fudge_factor = 100
    qmgr_message_active_limit = 20000
    qmgr_message_recipient_limit = 20000
    qmgr_message_recipient_minimum = 10
    qmqpd_authorized_clients =
    qmqpd_error_delay = 1s
    qmqpd_timeout = 300s
    queue_directory = /private/var/spool/postfix
    queue_file_attribute_count_limit = 100
    queue_minfree = 0
    queue_run_delay = 1000s
    queue_service_name = qmgr
    rbl_reply_maps =
    readme_directory = /usr/share/doc/postfix
    receive_override_options =
    recipient_bcc_maps =
    recipient_canonical_maps =
    recipient_delimiter =
    reject_code = 554
    relay_clientcerts =
    relay_destination_concurrency_limit = $default_destination_concurrency_limit
    relay_destination_recipient_limit = $default_destination_recipient_limit
    relay_domains = $mydestination
    relay_domains_reject_code = 554
    relay_recipient_maps =
    relay_transport = relay
    relayhost =
    relocated_maps =
    require_home_directory = no
    resolve_dequoted_address = yes
    resolve_null_domain = no
    rewrite_service_name = rewrite
    sample_directory = /usr/share/doc/postfix/examples
    sender_based_routing = no
    sender_bcc_maps =
    sender_canonical_maps =
    sendmail_path = /usr/sbin/sendmail
    service_throttle_time = 60s
    setgid_group = postdrop
    show_user_unknown_table_name = yes
    showq_service_name = showq
    smtp_always_send_ehlo = yes
    smtp_bind_address =
    smtp_connect_timeout = 30s
    smtp_data_done_timeout = 600s
    smtp_data_init_timeout = 120s
    smtp_data_xfer_timeout = 180s
    smtp_defer_if_no_mx_address_found = no
    smtp_destination_concurrency_limit = $default_destination_concurrency_limit
    smtp_destination_recipient_limit = $default_destination_recipient_limit
    smtp_enforce_tls = no
    smtp_helo_name = $myhostname
    smtp_helo_timeout = 300s
    smtp_host_lookup = dns
    smtp_line_length_limit = 990
    smtp_mail_timeout = 300s
    smtp_mx_address_limit = 0
    smtp_mx_session_limit = 2
    smtp_never_send_ehlo = no
    smtp_pix_workaround_delay_time = 10s
    smtp_pix_workaround_threshold_time = 500s
    smtp_quit_timeout = 300s
    smtp_quote_rfc821_envelope = yes
    smtp_randomize_addresses = yes
    smtp_rcpt_timeout = 300s
    smtp_rset_timeout = 120s
    smtp_sasl_auth_enable = no
    smtp_sasl_password_maps =
    smtp_sasl_security_options = noplaintext, noanonymous
    smtp_sasl_tls_security_options = $var_smtp_sasl_opts
    smtp_sasl_tls_verified_security_options = $var_smtp_sasl_tls_opts
    smtp_send_xforward_command = no
    smtp_skip_5xx_greeting = yes
    smtp_skip_quit_response = yes
    smtp_starttls_timeout = 300s
    smtp_tls_CAfile =
    smtp_tls_CApath =
    smtp_tls_cert_file =
    smtp_tls_cipherlist =
    smtp_tls_dcert_file =
    smtp_tls_dkey_file = $smtp_tls_dcert_file
    smtp_tls_enforce_peername = yes
    smtp_tls_key_file = $smtp_tls_cert_file
    smtp_tls_loglevel = 0
    smtp_tls_note_starttls_offer = no
    smtp_tls_per_site =
    smtp_tls_scert_verifydepth = 5
    smtp_tls_session_cache_database =
    smtp_tls_session_cache_timeout = 3600s
    smtp_use_tls = no
    smtp_xforward_timeout = 300s
    smtpd_authorized_verp_clients = $authorized_verp_clients
    smtpd_authorized_xclient_hosts =
    smtpd_authorized_xforward_hosts =
    smtpd_banner = $myhostname ESMTP $mail_name
    smtpd_client_connection_count_limit = 50
    smtpd_client_connection_limit_exceptions = $mynetworks
    smtpd_client_connection_rate_limit = 0
    smtpd_client_restrictions =
    smtpd_data_restrictions =
    smtpd_delay_reject = yes
    smtpd_enforce_tls = no
    smtpd_error_sleep_time = 1s
    smtpd_etrn_restrictions =
    smtpd_expansion_filter = \t\40!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_`abcdefghi jklmnopqrstuvwxyz{|}~
    smtpd_hard_error_limit = 20
    smtpd_helo_required = no
    smtpd_helo_restrictions =
    smtpd_history_flush_threshold = 100
    smtpd_junk_command_limit = 100
    smtpd_noop_commands =
    smtpd_null_access_lookup_key =
    smtpd_policy_service_max_idle = 300s
    smtpd_policy_service_max_ttl = 1000s
    smtpd_policy_service_timeout = 100s
    smtpd_proxy_ehlo = $myhostname
    smtpd_proxy_filter =
    smtpd_proxy_timeout = 100s
    smtpd_pw_server_security_options = none
    smtpd_recipient_limit = 1000
    smtpd_recipient_overshoot_limit = 1000
    smtpd_recipient_restrictions = permit_mynetworks, reject_unauth_destination
    smtpd_reject_unlisted_recipient = yes
    smtpd_reject_unlisted_sender = no
    smtpd_restriction_classes =
    smtpd_sasl_application_name = smtpd
    smtpd_sasl_auth_enable = no
    smtpd_sasl_exceptions_networks =
    smtpd_sasl_local_domain =
    smtpd_sasl_security_options = noanonymous
    smtpd_sasl_tls_security_options = $smtpd_sasl_security_options
    smtpd_sender_login_maps =
    smtpd_sender_restrictions =
    smtpd_soft_error_limit = 10
    smtpd_starttls_timeout = 300s
    smtpd_timeout = 300s
    smtpd_tls_CAfile =
    smtpd_tls_CApath =
    smtpd_tls_ask_ccert = no
    smtpd_tls_auth_only = no
    smtpd_tls_ccert_verifydepth = 5
    smtpd_tls_cert_file =
    smtpd_tls_cipherlist =
    smtpd_tls_dcert_file =
    smtpd_tls_dh1024_param_file =
    smtpd_tls_dh512_param_file =
    smtpd_tls_dkey_file = $smtpd_tls_dcert_file
    smtpd_tls_key_file =
    smtpd_tls_loglevel = 0
    smtpd_tls_received_header = no
    smtpd_tls_req_ccert = no
    smtpd_tls_session_cache_database =
    smtpd_tls_session_cache_timeout = 3600s
    smtpd_tls_wrappermode = no
    smtpd_use_pw_server = no
    smtpd_use_tls = no
    soft_bounce = no
    stale_lock_time = 500s
    strict_7bit_headers = no
    strict_8bitmime = no
    strict_8bitmime_body = no
    strict_mime_encoding_domain = no
    strict_rfc821_envelopes = no
    sun_mailtool_compatibility = no
    swap_bangpath = yes
    syslog_facility = mail
    syslog_name = postfix
    tls_daemon_random_bytes = 32
    tls_daemon_random_source =
    tls_random_bytes = 32
    tls_random_exchange_name = ${config_directory}/prng_exch
    tls_random_prng_update_period = 60s
    tls_random_reseed_period = 3600s
    tls_random_source =
    trace_service_name = trace
    transport_maps =
    transport_retry_time = 60s
    trigger_timeout = 10s
    undisclosed_recipients_header = To: undisclosed-recipients:;
    unknown_address_reject_code = 450
    unknown_client_reject_code = 450
    unknown_hostname_reject_code = 450
    unknown_local_recipient_reject_code = 550
    unknown_relay_recipient_reject_code = 550
    unknown_virtual_alias_reject_code = 550
    unknown_virtual_mailbox_reject_code = 550
    unverified_recipient_reject_code = 450
    unverified_sender_reject_code = 450
    verp_delimiter_filter = -=+
    virtual_alias_domains = $virtual_alias_maps
    virtual_alias_expansion_limit = 1000
    virtual_alias_maps = $virtual_maps
    virtual_alias_recursion_limit = 1000
    virtual_destination_concurrency_limit = $default_destination_concurrency_limit
    virtual_destination_recipient_limit = $default_destination_recipient_limit
    virtual_gid_maps =
    virtual_mailbox_base =
    virtual_mailbox_domains = $virtual_mailbox_maps
    virtual_mailbox_limit = 51200000
    virtual_mailbox_lock = fcntl
    virtual_mailbox_maps =
    virtual_minimum_uid = 100
    virtual_transport = virtual
    virtual_uid_maps =
    Message was edited by: JVicious
    Message was edited by: JVicious

    Ok, so I used mailfbr to try and fix it anyways, just to see what would happen. That didn't fix it, so I thought I could use the Backup program and just restore to an earlier point to see if the original settings could be restored, tat didn't work either, that totally messed everything up worse. I've had problems connecting to the lmtp socket, reading the mailbox file, permissions, but I think I've fixed all those. The only problem now is that everything gets stuck in the queue. I've checked these topics almost the whole day for these problems, but the cause and solution are not the same for me. Anything I can do? Or should I just start fresh again?
    postconf -n
    command_directory = /usr/sbin
    config_directory = /etc/postfix
    daemon_directory = /usr/libexec/postfix
    debugpeerlevel = 2
    enableserveroptions = yes
    html_directory = no
    inet_interfaces = all
    mail_owner = postfix
    mailboxsizelimit = 0
    mailbox_transport = cyrus
    mailq_path = /usr/bin/mailq
    manpage_directory = /usr/share/man
    mydestination = $myhostname,localhost.$mydomain,localhost,aetkinz.com,sellwiz.biz,riflematch.co m
    mydomain = aetkinz.com
    mydomain_fallback = localhost
    myhostname = mail.aetkinz.com
    mynetworks = 127.0.0.1/32,10.0.11.0/24,192.168.34.0/24
    mynetworks_style = host
    newaliases_path = /usr/bin/newaliases
    queue_directory = /private/var/spool/postfix
    readme_directory = /usr/share/doc/postfix
    sample_directory = /usr/share/doc/postfix/examples
    sendmail_path = /usr/sbin/sendmail
    setgid_group = postdrop
    smtpdtls_keyfile =
    unknownlocal_recipient_rejectcode = 550
    70-91-236-58-BusName-Michigan:/usr/sbin root# postconf -n
    always_bcc =
    command_directory = /usr/sbin
    config_directory = /etc/postfix
    daemon_directory = /usr/libexec/postfix
    debugpeerlevel = 2
    enableserveroptions = yes
    html_directory = no
    inet_interfaces = all
    localrecipientmaps =
    luser_relay = postmaster
    mail_owner = postfix
    mailboxsizelimit = 0
    mailbox_transport = cyrus
    mailq_path = /usr/bin/mailq
    manpage_directory = /usr/share/man
    mydestination = $myhostname,localhost.$mydomain,localhost,aetkinz.com,sellwiz.biz,riflematch.co m
    mydomain = aetkinz.com
    mydomain_fallback = localhost
    myhostname = mail.aetkinz.com
    mynetworks = 127.0.0.1/32,10.0.11.0/24,192.168.34.0/24
    mynetworks_style = host
    newaliases_path = /usr/bin/newaliases
    queue_directory = /private/var/spool/postfix
    readme_directory = /usr/share/doc/postfix
    sample_directory = /usr/share/doc/postfix/examples
    sendmail_path = /usr/sbin/sendmail
    setgid_group = postdrop
    smtpdtls_keyfile =
    unknownlocal_recipient_rejectcode = 550

  • BT SMTP server not authenticating

    Hi all,
    I have tried all avenues I can think of, including looking all over these forums and trying everything people have suggested but with no luck.
    Since yesterday afternoon an email account has stopped sending emails (receiving is fine), no settings were changed. I keep on getting prompted for user name and password for the mail.btinternet.com mail server. I get this problem in both outlook and outlook express (for testing) and also I cannot send emails via the ipad either. I have tried speaking to the BT support but they didn’t offer any help as we are using mail clients and not their web mail.
    SMTP settings are: Port = 25 none SSL, Authenticate using same as POP3 log on
    I have tried port 465 with ssl and 587, the lot.
    I have notcied this does work on 1 other computer I have been testing on, just to add to the confusion!! Any help or suggestions would be great!
    Thanks in advance
    jezza
    Solved!
    Go to Solution.

    My problem is now resolved.  In the end i restarted the router.  The only thing I can assume is there is a stuck session on BTs STMP servers after restarting the router I got a new public IP.
    BT support was as usual, a waste of time and no help what so ever.  Clearly a problem on their side but out right refused to help.
    Im not sure this will help your problem if you cannot send via BT webmail, this was never a problem for me.

  • Outgoing mail server not recognized

    Hi there
    After a week of having Snow Leopard my outgoing mail address is now suddenly rejected by the server. I have tried to delete my mail box but that doesn't work.
    Any help would be appreciated.
    Thanks Ian

    I looked this up:
    Account information
    account type POP
    Email adress : (your address)
    File name : (your name)
    Incoming server:pop.prodigy.net.mx
    username:(your name)
    password:(your password)
    outgoing server: (depends what you have configured) see further down.
    tick the box use only this server
    Under Advanced select advance on top of your menu.
    Enable this account: tick this box
    Include when auto....etc:click this box
    leave copy etc : do not tick box
    Now still to configure outgoing server for that use connection doctor.
    You find this in the drop down menu just beside left off the help drop down menu.
    Click the doctor.The doctor goes scanning and find the incoming server a green indicator is lighted.
    I t does not find out going server and a red light appears.
    Double click on the message beside the red light
    A menu appears for out going server.
    In the top square empty all info that is there by clicking - (= the minus sign) under this top square
    When empty click + to enter the details for outgoing server.
    A light gray double click appears.
    do that and fill in your details: smtp.prodigy.net .mx
    give a name to this server:that name is the one I mentioned above depends etc
    click apply.
    Close the window and you will be asked to save if it is not saved already.
    Remember my first advise above when you still can not get connected the reason may be that your provider use a dynamic DNS address the changes every tim you log in for this change the DNS address as in my previous advise.
    Please let me know if it works for you.Connection Doctor is the only way I could reach quick access to outgoing server.
    Alternatively delete all the accounts and just follow the procedure for adding account.
    Wait until the server is found take quite some time but you may still have patience after this.
    I have spend 3 days to get it all right! and 3 hours phone my provider and 3 hour Apple

  • Mail 2.1.3 outgoing mail server not recognized

    I am running Mail 2.1.3 (OS 10.4.11) on an old power book. I use the outgoing mail server "smtp.me.com:name" . Each time Mail is restarted, sending an email results in the error message "Cannot verify SSL server...". Hitting Continue  lets the message be sent. Using the prescribed solution: ((1) show certificate (2) move certificate to desk top (3) double click and choose X509anchor) has no effect.  Changing the Port number e.g. from 25 to 587, also has no effect. Is there a solution to this problem, or is there something wrong with "smtp.me.com"?

    I did the suggested set-up, but no joy. The result was as before:
    There is no option "SMTP Authentification required" What I see is
    Hitting Continue still works, but clearly there is still something wrong. Do you have any other suggestions?

  • Server not recognizing access privileges

    I have created new student accounts, set their privileges to read & write and copied those privileges to all enclosed folders, but my students still cannot gain access to their respective folders. I tried deleting a student account and recreating, but this didn't solve the problem. Also tried restarting server, but again, not a solution.
    Any suggestions? Somewhat desperate here.
    Thanks in advance!

    I had to reset permissions for each account, but was able to solve the problem that way.

  • DPR 1260 Wireless Print Server not recognized on Macbook Pro

    Please help. I am a first time Mac user. I have a D-link wireless print server that is connected to a HP Office Jet 6200 all in one. For some reason I cannot set up the wireless print server. A couple questions: I enter the IP address when I set up a new printer. Still nothing. Do I need to select IP printing when setting up a new printer? Is D-link wireless printing supported by Leopard? When I plug in direct via USB - Mac prints no problem. Tech support really couldn't help - neither could D-link. Does anyone know step by step how to set up? Explain it to me like I'm 4 years old. Thanks.

    You have two issues going at once.
    Driver - There are two kinds of print driver on OS X (not like Windows) - Carbon and CUPS. CUPS drivers are required to use the standard network print protocols provided in OS X by the CUPS system - IP printing and Windows printing. But HP doesn't provide CUPS drivers for non-postscript printers. They provide Carbon drivers where they have limited the driver to USB only. To get a CUPS driver for your model, install the 3 part hpijs:
    http://www.linux-foundation.org/en/OpenPrinting/macosx
    Print & Fax prefs setup -
    I call your attention to page 19 of the print server manual. Dlink simply has "no clue" about OS X. The easiest comm protocol for you is HP Jetdirect, which equals TCP/IP raw port 9100. That is for USB port 1 -- for the other USB ports you will need to use advanced setup in Print & Fax.
    So, plug the printer into USB port 1 and set up using IP printer > HP Jetdirect protocol, selecting your new hpijs driver.
    Good luck.

Maybe you are looking for