TS3276 the connection dr. shows my acounts more than once

I cannot send emails from any of my accounts(I have 3) everything was fine yesterday, this morning i went to send an email and I cannot. the connection Dr. shows my accounts 2 times - Once with a green dot but also shows them(repeated beneath the green dots) with red dots? The Network connection button is greyed out? Any suggestions.

Thank you for your reply. I started doing as you suggested, I was hoping I could delete the offending accounts through the Connection Dr.(wishfull thinking) Only because the Offending accounts are also the green dot accounts. For some reason they are repeated: so I have a hotmail acct that is both a green and a red dot I have a Go Daddy account that is both green and Red - I cant even take them all "offline" and put them back "online" because according the status in the Mail Application the accounts are "online" but according to the preferences>accounts>outgoing mail sever they are all "offline". very confusing especially considering They work fine one night the next morning all this. I will try your advice I was nervous I would loose everything if i deleted the account but I am realizing now that shouldn't happen. Thanks again for your help.

Similar Messages

Select the same attribute in a query more than once

Hi Experts,
My requirement is to select the same attribute in a query more than once.
How can I acheive this?
Expecting an early solution..
Pilliga

Hi,
Create a calculated attribute that just displays the "same attribute".
(Note: you will need to uniquely name this object).
For example, if you wish to display Emp Name twice in the same query, then create a calculated attribute called Emp Name2 and select it and Emp Name in your query and the same info will be displayed twice in your results set.
Cheers,
Tanish

Displaying the records records which are coming more than once

hi
create table temp(comp_id int,branch_id int);
comp_id | branch_id
---------+-----------
1000 | 1
1000 | 1
1000 | 2
1000 | 2
1000 | 3
2000 | 1
2000 | 1
2000 | 2
2000 | 3
how can i write a query which displays the records records which are coming more than once on the basis of fields comp_id and branch_id. e.g. 1000 | 1 should be displayed because it is coming more than once. 1000 | 3 should not be, because it has a single entry.

select comp_id, branch_id, count(*)
from temp
group by comp_id, branch_id
having count(*)>1
Please note this forum is not a SQL class and it is not the place to have your homework done.
Sybrand Bakker
Senior Oracle DBA

Restrict the receipt of same serial number more than once

Hi,
I want to restrict the same serial number to be taken in the stock more than once..
Can somebody guide how to acheive this..
At the same time I have the indicator set of auto creation of serial numbers at the time of goods receipt in serial number profile.
e.g. I posted 2 material documents (101) one with material A and another with material B with the same serial number S
when I check the serial number S in transaction code IQ03, it is showing against 2 mat. codes. I dont want this scenario to occur.

IN IQ03 , you have to put both the material number and serial number.
The serial number is tied to material number. Hence, different material number can have the same serial number.

Changing the Window Color of an JInternalFrame more than once

I want to change the color of an JInternalFrame when it was created. This could be more than once.
I know that i can use:
UIManager.put("InternalFrame.activeTitleBackground", Color.RED);
but this code only takes effect before the InternalFrame is createt

You are using iPhoto 9 (11)? If you are then the themes would be obvious when you select iPhoto as your mail client in iPhoto's General preference pane (upper left hand image)
Click to view full size
and then use the Share ➙ Email button
Click to view full size
to get this window:
Click to view full size
However, I was mistaken in that the background colors for those themes can't be changed. The same goes for the stationary themes in Mail.

Show sudo-disclaimer more than once

The first time one uses sudo this message appears:
We trust you have received the usual lecture from the local System Administrator. It usually boils down to these three things:
#1) Respect the privacy of others.
#2) Think before you type.
#3) With great power comes great responsibility.
However, this message only appears once. Is there a way to show it every time sudo is used ?

You need to edit "/etc/sudoers" and set the "lecture"
value to "always".
http://www.sudo.ws/sudo/man/sudoers.html
Thanks a lot !
My /etc/sudoers was pretty empty, so I really needed to read the f. manual
Who doesn't want to do that, just add
Defaults lecture = always
under the "# Defaults specification" line of the file. No garantuees however. If you're editing the file in a productive enviroment, make sure to use the visudo editor.
And remember.... With great power comes great responsibility

Why does it show a user more than once in Users On...

At times I see that the same forum id is shown logged in twice on the Users Online
Is this just me going mad?
-+-No longer a forum member-+-

Hi DS,
That happens when the site's related cookies (viewable under options in your browser) have not cleared and the timeout session has not been registered. It doesn't affect your minutes online so you can either delete your cookies or just let it be. It has no negative effect so no need to worry.
Thanks.

Why does the message alert tone repeats itself more than once?

every once in a while my message alert tone repeats itself while a message is delivered. if i switch off and switch on the problem gets resolved only for a while.

Check your Settings > Notifications > Messages > Repeat Alert ?

ICloud has added some albums more than once when viewed on my iPad.Is it possible to delete the unwanted extra copies.

How do I erase unwanted albums from iCloud.On my iPad the same album has been added more than once yet on my mac with iCloud there are no issues.

I assume you mean photo albums. How were these albums added in the first place? Where they created on your iPad? Do they have the same name?

Business rules in 11.1.1.3 execute more than once

My client has the situation where certain business rules (launched from the Planning BR interface) will execute more than once, sometimes twice or even three times. It seems that the rule will start to execute and then after 1 or two minutes, will launch again. the job console will show the information.

This is a known issue and has to do with the http timeout settings. Usually this will happen on the 5 minute limit, but it depends what setting they have.
Take a look at this article and see if it applies:
Business Rules That Take More Than Five Minutes to Execute Are Re-launched Repeatedly [ID 755406.1]
Agnete
Edited by: Agnete on Oct 22, 2012 12:51 PM

Ftp Adapter getting invoked more than once

Hello All,
I have an FTP polling on a remote server, the options that i chose are archive file after read. The problem is the bpel process is getting invoked more than once. If anyone encountered a similar problem, help is really appreciated.
Thanks
Krishna

Hi Krishna,
What release are you on? refer to metalink note: 730515.1
In 10.1.3.4 MLR#7 this works:
Add the below section within BPELProcess and replace the bits in upper case to suit your code:
    <activationAgents>
      <activationAgent className="oracle.tip.adapter.fw.agent.jca.JCAActivationAgent" partnerLink="PARNERLINKNAME">
        <property name="clusterGroupId">SOMEUNIQUEVALUE</property>
        <property name="portType">PARTNERLINK_PORTTYPE</property>
      </activationAgent>
    </activationAgents>regards,
Shanmu
http://www.prshanmu.com/articles/

Messages receive appear more than once in my mailbox

The problem is the messages that i receive appear more than once and it keep doing this.
Its like they were cloning or multiplicand, I have until 8 messages of the same thing and this thing continuous happening.
What can I do?, i all ready try the suggestions in the support area in apple, but this does not works with my problem.
I even think that cold be a virus.
Any suggestions will be very appreciate.
Thnaks

Please, try to provide as much information as possible, instead of as little as possible. What’s the time interval chosen in the Remove copy from server popup menu?
It looks like Mail has lost track of which messages have already been downloaded and is downloading them again, or maybe it’s failing to remove them from the server according to your settings.
Try to remove from the server all the messages that have already been downloaded by clicking the Remove now button -- check for new mail first, just in case there is something amiss and that function doesn’t work as expected.
If Preferences > Accounts > Advanced > Remove now fails to remove the messages from the server, you can try to do so manually using the Account Info window. In order to use that feature, choose Get Info (⌘I) from the Action menu (gear icon) located below the mailboxes list in the main Mail window.

Statechart module: Using a master statechart to launch a slave statechart more than once without getting Error 1100 at Obtain Queue (No object of that name was found)

Hello,
I am trying to create a project using the statechart module, and one of the techniques I am trying to use is a "master-slave" statechart structure, illustrated by the code I have attached to this post (you probably need the statechart module installed to look at my example code). The problem I have recently discovered is that the slave statecharts cannot be launched more than once without raising an Error 1100 at Obtain Queue. I have gathered from a few other posts that the cause of this error is the fact that the First Call primitive is used by the Statechart module to initialize the statechart when it is first run. This works fine for the first launch of the slave statechart, but the second launch and subsequent launches of the statechart fail on Error 1100, since the First Call primitive won't let the statechart initialize (the First Call primitive tells the statechart it has already been initialized (this isn't the first call), and the External Trigger function then tries to send an external trigger to a queue that doesn't exist).
What I can't gather from those posts is the correction I need to make to get this design to work. I tried to send the slave statecharts a boolean flag for the "Init?" terminal, to force a reinitializing of the slave statechart. I couldn't get that to work. I tried to not load the slave sub VI as a slave sub VI, and launch it using some VI Server code, so that maybe the slave sub VI would be loaded and unloaded, therefore causing the statechart to properly initialize, but I couldn't get that to work either. What correction should I make? How do I get this to work?
I really want to use this design pattern, first of all since I wrote a lot of code already with this structure, and second of all, it makes a lot of sense to me. How do I make it work? If someone could post a version of my code that functions the same, but without the error, I would appreciate that. If you don't have time for that, but would be able to outline the steps I need to take to get it to work, that would be helpful, as well.
Thanks to anyone for any assistance they can provide. If you need any other information, please let me know.
Attachments:
Statechart Sample.zip ‏431 KB

Thanks, Deborah. I tried this approach out, and it turns out you can't just wire a TRUE to the "Init?" terminal. You have to wire a TRUE for the first run of the slave statechart, and then it has to become a FALSE. If you wire a TRUE, it will constantly try to reset the statechart, which doesn't work.
The master statechart has to keep track of whether it has called the slave statechart, and communicate that to the slave statechart. On the very first call of the slave statechart, the "First Call?" function inside of the "Run Statechart" function will give a TRUE, which initializes the statechart properly, and then gives a FALSE from that point after. After that, the "First Call?" function doesn't work anymore (it will always return FALSE), and an initial TRUE, with subsequent FALSE values, has to be provided manually.
I attached a version that does this, which appears to work. Let me know if it doesn't work for someone, or if you have a better idea to implement the correction.
Thanks to everyone for the replies!
Attachments:
Master-Slave Statechart Sample.zip ‏439 KB

WDDOMODIFYVIEW and WDDOPOSTPROCESSING is called more than once!

Hello everybody,
maybe someone can help me. Our WDA application consist of 5 Components. One main and 4 components embedded in it. We instantiate the components in the WDDOINIT of the main component and use them between themselves.
I suppose that's the reason that the events in the views and componentcontrollers of each component is called so often.
With a break point in a WDDOMODIFYVIEW an the debugger I find out that the HANDLE_REQUEST methos from the CL_WDR_CLIENT_ABSTRACT_HTTP class is startet also more than once.
1. if m_ucf is not bound -> yes and m_request_type = suspend
2. if m_ucf is not bound -> initial and m_request_type = suspend
3. if m_ucf is not bound -> initial and m_request_type = suspend
4. if m_ucf is not bound -> initial and m_request_type = refresh
Maybe someone has expierence with it an can give a hint or explanations for this.
I hope so
Thanks for any answer
Best regards
Christian Breitenbach

hi christian.......
a wddomodifyview view method will be called even if there is a little change in your view. it will b e called more times than your normal pbo in a dynpro application. the wddoinit will be called only before the view is loaded... but the modify willbe called even for popups nad any event.
---regards,
alex b justin

'PortfolioBacklogs' cannot appear more than once if content model type is "all"

I'm trying to add another level above feature and have followed these instructions https://msdn.microsoft.com/en-us/library/dn217880.aspx
The project is setup as scrum not agile, maybe that is why???, but I get the following error:
'PortfolioBacklogs' cannot appear more than once if content model type is "all"
and haven't been able to find where to change the content model type.

Hi Dckennedy1,
Thanks for your post.
What’s the version of your TFS? TFS 2013 Update 4? Your current team project created using default Scrum 2013.4 process template?  After which step you received this error? You can share your error screenshot(s) here.
I created a new Scrum 2013.4 template team project in my TFS 2013 Update 4 Server, and followed the steps in that document to add Initiatives work item type in my TFS Web Access, the Initiatives work item type be added into portfolios successfully, you can
refer to the below screenshot:
The only difference with steps in that document is I edited the PortfolioBacklogs section as below in my ProcessConfiguration.xml file.
   <PortfolioBacklog category="MyCompany.InitiativeCategory" pluralName="Initiatives" singularName="Initiative">
      <States>
        <State value="New" type="Proposed" />
        <State value="In Progress" type="InProgress" />
        <State value="Removed" type="InProgress" />
        <State value="Done" type="Complete" />
      </States>
      <Columns>
        <Column refname="System.WorkItemType" width="100" />
        <Column refname="System.Title" width="400" />
        <Column refname="System.State" width="100" />
        <Column refname="Microsoft.VSTS.Common.BusinessValue" width="50" />
        <Column refname="Microsoft.VSTS.Scheduling.TargetDate" width="100" />
        <Column refname="System.Tags" width="200" />
     </Columns>
      <AddPanel>
        <Fields>
          <Field refname="System.Title" />
        </Fields>
      </AddPanel>
    </PortfolioBacklog>
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

TS3276 the connection dr. shows my acounts more than once

Similar Messages

Maybe you are looking for