TS3297 What can I do about error 42408?

What can I do about error 42408? I can't download my purchased and matched music from the store.

Ruleo,
It is common to have a reading on a disconnected channel. Generally speaking for measurement devices, un-connected voltage inputs tend to float around to either the positive or negative supply rail of the measuring device and current inputs will float around the 0 mA range. This is due both to device design and the real world behavior of components as opposed to the ideal behavior model. Some devices such as the FP-TC-120, will have circuitry to cause un-connected outputs to go to a specific level (in the case of the FP-TC-120, unconnected outputs will always read full scale of the range).
When you say you are getting a reading on that channel, is it a reading that is close to mininum scale, or is it a reading in the middle of the
scale, i.e. 10.2 mA? If the channel is not reading close to minimum scale, it is possible that the channel has been damaged. On the FP-AI-111, you can use a DMM to measure between the Iin pin and any of the C or Com pins. First disconnect any external wiring to the channel, then hook in the DMM. The resistance (within the accuracy of the DMM) should be exactly 100 Ohms. If the resistance is greater than 100 Ohms, then the channel was damaged by an over-current condition that exceeded the published specifications of the module (30 mA). In that case, the module will have to be sent to National Instruments for repair.
Regards,
Aaron

Similar Messages

  • TS3694 what can i do about error (6) to fix it and install my software update. my iPhone is blocked now and it show the cable and itunes logo's .

    i made the update for IOS 6  with the latest version of iTunes and it downloaded the latest version of IOs 6 after that, when it was trying to intall the update it gave  me an error ( error (6) )  , now my iPhone is in the stage where it shows me a cable and the itunes logo. what can i do to fix it ?

    Error 2, 4 (or -4), 6, 40, 1000, 9006
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.

  • What can I do about "error searchapp" appearing when I try to log in to Tiscali webmail? I have been using tiscali for years and the problem started today.

    the details of the problem are as I put in the question: I cannot access the Talk talk tiscali website because when I log in I get "error searchapp". This does not occur in Outlook Express but I prefer Firefox.

    Greetings,
    What version of the Mac OS and what version of iCal are you running?
    Are you using MobileMe calendars (or any other server based calendars like Google) in your iCal?
    While you answer those questions you can try the following troubleshooting:
    1. First make an iCal backup:  Click on each calendar on the left hand side of iCal 1 at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
    2. Remove the following to the trash and restart your computer:
    Home > Library > Caches > com.apple.ical
    Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
    Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
    ---NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
    Once the computer is back up and running open iCal and test.
    Hope that helps.

  • What can I do about error codes 33487 and 33443 from FieldPoint​.

    I am using the AI-111 current module with FP 1600 network module. I checked all wiring and connections and I can't find what is causing the problem.

    Ruleo,
    It is common to have a reading on a disconnected channel. Generally speaking for measurement devices, un-connected voltage inputs tend to float around to either the positive or negative supply rail of the measuring device and current inputs will float around the 0 mA range. This is due both to device design and the real world behavior of components as opposed to the ideal behavior model. Some devices such as the FP-TC-120, will have circuitry to cause un-connected outputs to go to a specific level (in the case of the FP-TC-120, unconnected outputs will always read full scale of the range).
    When you say you are getting a reading on that channel, is it a reading that is close to mininum scale, or is it a reading in the middle of the
    scale, i.e. 10.2 mA? If the channel is not reading close to minimum scale, it is possible that the channel has been damaged. On the FP-AI-111, you can use a DMM to measure between the Iin pin and any of the C or Com pins. First disconnect any external wiring to the channel, then hook in the DMM. The resistance (within the accuracy of the DMM) should be exactly 100 Ohms. If the resistance is greater than 100 Ohms, then the channel was damaged by an over-current condition that exceeded the published specifications of the module (30 mA). In that case, the module will have to be sent to National Instruments for repair.
    Regards,
    Aaron

  • What can I do about error -50 in a video with only short clips (less than 1 sec)?

    I get Error -50 when trying to export a music video with lots of short clips I just made in imovie 8.0.6. After googleing the problem i realize that its probably the short clips (under 1 sec) that are the problem.
    Is there any way to get around this?
    Would really appriciate the help!!!

    As a test Depress an hold the option key while launching iPhoto - create a new test  library and import a few photos into it - report back with the results and if this problem repeats in the new test library
    LN

  • What can I do about error code  w_ADEPT_CODE_EXPIRED

    I cannot move library books to Digital Reader  Eror code  W_ADEPT_CODE_EXPIRED  comes up.  How do I fix this?

    One possible reason is that the loan really has expired.
    One is that your timezone, time or daylight settings are not correct.
    One is that your timezone, time and daylight settings are correct, but the library has different ones and only wants to talk within timezone.

  • While importing a CD into my iTunes library I kept getting the following error message- iTunes library cannot be saved- An unknown error occurred (-54).  What does this error mean and what can I do about it??

    While importing a CD into my iTunes library I kept getting the following error message- iTunes cannot be saved- An unknown error occurred (-54).  what does this error mean and what can I do about it??

    The CD I imported (in the above post) is now not in my iTunes library. Any help would be appreciated .

  • When I try to connect the Air with my iPhone to create an Hotspot, it drops the connection and gives an error message in the iPhone saying that the device (MacBook Air) is not supported. What can i do about it?

    When I try to connect the Air with my iPhone to create an Hotspot, it drops the connection and gives an error message in the iPhone saying that the device (MacBook Air) is not supported. What can i do about it?

    The problem has been fixed with the most recent OS X software update.

  • What can I do about this: After upgrading to firefox 6, I get this error. TypeError: Components.classes[cid] is undefined???

    What can I do about this:
    After upgrading to firefox 6, I get this error.
    When I click to open Firefox, A box open with the following error:
    JAVASCRIPT Application
    TypeError: Components.classes[cid] is undefined?
    After I click close on the box, then Firefox will start. I really just want to get the error fixed so that when I want firefox open, I don't have to see this box anymore.

    You need to figure out which add-on is causing that error and disable it until the developer of that add-on fixes it. There may be an error message about that in the Error Console, accessed through the Web Developer menu item or through {Ctrl + Shft + J}.
    Also see this: <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • I've recently received an error message from Time Machine that my Macbook Pro's sparsebundle is in use.  What is this and what can I do about it?

    I've recently received an error message from Time Machine that my Macbook Pro's sparsebundle is in use.  What is this and what can I do about it?

    This is asked at least 5-6 times a day here.
    Look at the right hand column.. more like this.
    It is a bug in Mountain Lion.
    Read C12 http://pondini.org/TM/Troubleshooting.html
    But the fast solution.. unplug the TC.. count to 10.. plug it back in.

  • Cannot install Adobe Application Manager. I get error message: "Installer failed to initialize".  What can I do about this?

    Hello,
    Cannot install Adobe Application Manager. I get error message: "Installer failed to initialize".  What can I do about this?

    if mac:
    go to HD>library>application support>adobe>caps and rename the caps folder.
    go to USER library>application support>adobe>OOBE and rename OOBE folder
    install Adobe application manager from below link.
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774

  • I got a notice saying either "Time Capsule is failing," or "Time Capsule Disks are failing". What does this mean? And what can I do about it?

    What does it mean when one gets a message that Time Capsule or its disks are failing?
    What can be done about it, if it's a reparable situation?

    Thanks for the info.
    I will look into buying a large external hard drive as an option. But given that I can't seem to back up anyway, is there another option other buying another Time Capsule? Do any of the external hard drives have embedded intelligence that allows them to work off my other router.
    This is the log file from my TC's last attempt at backing up:
    Starting standard backup
    Attempting to mount network destination using URL: afp://Xxx@Xxx._afpovertcp._tcp.local/Xxx's%20Tim
    Mounted network destination using URL: afp://Xxx@Xxx._afpovertcp._tcp.local/Xxx's%20Tim
    Failed to attach to image: /Volumes/Xxx's Tim-1/Xxx’sMacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
    Failed to mount disk image /Volumes/Xxx's Tim-1/Xxx’sMacBook Pro.sparsebundle (DIHLDiskImageAttach returned: 35)
    Mount failed... waiting 60 seconds and trying again.
    Ejected Time Machine network volume.
    Attempting to mount network destination using URL: afp://Xxx@Xxx._afpovertcp._tcp.local/Xxx's%20Tim
    Mounted network destination using URL: afp://Xxx@Xxx._afpovertcp._tcp.local/Xxx's%20Tim
    Failed to attach to image: /Volumes/Xxx's Tim-1/Xxx’sMacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
    Failed to mount disk image /Volumes/Xxx's Tim-1/Xxx’sMacBook Pro.sparsebundle (DIHLDiskImageAttach returned: 35)
    Mount failed... waiting 60 seconds and trying again.
    Ejected Time Machine network volume.
    Attempting to mount network destination using URL: afp://Xxx@Xxx._afpovertcp._tcp.local/Xxx's%20Tim
    Mounted network destination using URL: afp://Xxx@Xxx._afpovertcp._tcp.local/Xxx's%20Tim
    Failed to attach to image: /Volumes/Xxx's Tim-1/Xxx’sMacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
    Failed to mount disk image /Volumes/Xxx's Tim-1/Xxx’sMacBook Pro.sparsebundle (DIHLDiskImageAttach returned: 35)
    Giving up after 3 retries.
    Backup failed with error: 31
    Ejected Time Machine network volume.
    [End]
    As you can see, not a very happy outcome. I would appreciate any additional ideas you might have about resolving this.
    Regards,

  • TS1702 I'm getting an " application" cannot be downloaded at this time message. With any app I try to download/update. Why is this happening and what can I do about it ?

    I'm getting an " application" cannot be downloaded at this time message. With any app I try to download/update. Why is this happening and what can I do about it ?

    I am fighting the same error. I gifted an album to mydaughter and she got that when she tried to cash it in. iTunes support was quick to respond saying the would refund in 5 to 7 days. That was 13 days ago and they will not respond now. Try to contact support to see if they can help. Also be sure you do not have restrictions enabled in settings. If your parental controls are set to block certian content ratings this will give you an error as well.
      You could also try to purchacs through the iTunes program on Mac or PC. Check your restrictions there too. If your device is company owned your employers may have restrictions enabled preventing certian apps from being installed. Hope that helps.
               E

  • I forgot my passcode on my iPad and it was synced to a different computer that I no longer have. What can I do about this?

    I have forgotten my passcode on my iPad. It was synced to a different computer that I no longer have. What can I do about this and if it at all possible without losing everything that was on it. Thanks for the help.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
    ````````````````
    Sync Your iOS Device with a New Computer Without Losing Data
    http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive
    https://discussions.apple.com/docs/DOC-3141
     Cheers, Tom

  • I have an ipod touch and now it doesnt sync properly. It gets to stage 1 of 3 of syncing( Which is 'backing up') Then it stops and itunes closes. Why wont this sync and what can I do about it?

    I have an ipod touch and now it doesnt sync properly. It gets to stage 1 of 3 of syncing( Which is 'backing up') Then it stops and itunes closes. Why wont this sync and what can I do about it?

    Hello,
    I am currently an owner of an Ipod Touch 4th generation. I see you are having problems with your Ipod Touch, so I will try to find a solution to your problem.
    Restart the Computer. This sometimes happens to me when I keep my Windows 7 on Sleep, and I try to sync my Ipod
    Make sure you have the latest version of Itunes
    Hope that helps!
    If none of the above solutions work, can you please respond back ASAP as I will try to find another solution to your problem (This might even help others with the same problem!)
    Cheers!
    Pizza98704

Maybe you are looking for