TS3367 face time has the camera icon with a line thru it and will not complete a call?

on my iphone, when trying a face time call, the camera has a line thru it and will not complete the call. it just rings tothe person, but there phone does not ring.

I have the same problem. I can't figure it out. I have followed their
trouble-shooting guide with no luck/\.

Similar Messages

My sons ipod classic was left on all day and now has a red circle with a cross in it and will not work

my sons ipod classic was left on all day and now has a red circle with a cross in it and will not work - nothing we do will make it work - any ideas??

Try to restore the iPod. Here's an article that provides troubleshooting for it.
http://support.apple.com/kb/TS1463
If that doesn't work visit an Apple Store and see if they can replace it.

AirPort has the self-assigned IP address .... and will not be able to connect to the Internet., AirPort has the self-assigned IP address ...and will not be able to connect to the Internet.

I came from the U.S to Spain and My laptop will not connect to the internet via airport I keep getting the message above what do I do?

Hi, the one below worked for my case.
I beleive there are different reasons for this problem. In my case, doing try and error, I found a solution for my case (at the ver end of this post). The reason I say this is because I had the same problem and googled the problem for quite a while ... none of the suggested solutions worked for me, although it seems like they worked for others in some cases. I tired taking my computer to different wifi networks (mainly unprotected ... ie no WAP) and alwasy got the same problem. I even took the computer to apple and no luck ... surprisely when I took it to apple it did connect to apple's wifi network in the store, so according to them it was probably some problem with my network ... when I walked out of the store I tried connecting to another open network in the mall and got the same problem ... went back to apple and they tried a few things without any luck (however it would connect to apple's network)
Of all the solutions I read the one that made more sense for me was the one related to keychain access, although in my case I had the problem trying to get into an unprotected network, which at some point was protected.
So this is what I did: among other things I compared the keychain access file with that from another macbook that was working ok, and I noticed that although my wifi network is unprotected there was an entry for it in the keychain access list (maybe from the time that I had the network protected with the deafult config from the router). So I went to network preferences on the computer that had the problem, went to advanced and selected the name of my network (configured without security), and changed it to WAP personnal security, and entered the previous access code from my router --- the same configured in the other mac keychain file ---. This created an entry for my network in the keychain access file, just as it showed in the other macbook. I then went back to network preference and change the configuration of my network back without security. AND NOW it is working, NO MORE SELF ASSIGNED IP ADDRESS. (remember that I actually I never really changed the configuration of my wifi router to make the network secured ... actually I didn't touch it at all .... well I did before some days ago trying to follow some of the suggested solutions, doing things like power cycle, reset to factory default etc, etc, which never worked)

Why doesn't the ichat icon show up only shows messages and will not show buddies

Why doesn't the ichat icon show up? It will only show the messag area. It will not show the people you have as friends to leave offline messages

When I take my phone off charge in the morning I get an info box on the front which has the sound trumpet icon with a line through it and the word Mute. The only way to get rid of it is to reboot the phone any ideas as to how I can stop this happening?

When I take my phone off charge in the morning I get an info box on the front which has the sound trumpet icon with a line through it and the word Mute. The only way to get rid of it is to reboot the phone any ideas as to how I can stop this happening?

Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
This happens the same whenever I try to install.
To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
My plugin is still showing as out of date.
Is there anything you could suggest. Thanks for your time.

I tried synching my 2nd generation ipod touch and it told me to update the software. Then it said "error 37" and could not complete updating but it has left me with an ipod that is not recognised by my pc and wont turn on or anything- just black

I tried synching my 2nd generation ipod touch and it told me to update the software. Then it said "error 37" and could not complete updating but it has left me with an ipod that is not recognised by my pc and wont turn on or anything- just black

Error 20, 21, 34, 37: These errors typically occur when security software interferes with the restore and update process. If you are using a PC, follow this article to resolve this issue.
Above from:
http://support.apple.com/kb/TS3694
You also may have to place the iPod in recovery mode. For how see:
iPhone and iPod touch: Unable to update or restore

Hello every one, am having issue with my itunes, for some reason or another my icon in the itunes doesnt change, its stuck on Songs, and will not let me get playlist or anything else. can any one tell me if that can be fixed

hello every one, am having issue with my itunes, for some reason or another my icon in the itunes doesnt change, its stuck on Songs, and will not let me get playlist or anything else. can any one tell me if that can be fixed

http://support.apple.com/kb/TS3694#error-1
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.

JPG files copied to Philips Picopix 3410 are currupted with a prefix of ._ and will not display on the PicoPix

JPG files copied to Philips Picopix 3410 are currupted with a prefix of ._ and will not display on the PicoPix. Help please?

There are a couple of ways to remove these items from the drive.
One is with the $15 shareware app, BlueHarvest. It will remove the AppleDouble files from the drives you want the ._ files removed from, and has an option to prevent them from being written to non Apple formatted drives in the first place.
But the free and pretty easy way to do it is to use Terminal. From what I can see in the manual for your projector, you can only get images to it on either an SD card or a USB flash drive. So I'm going to assume a USB drive for the following.
Plug in your MS-DOS formatted drive so it appears on the Mac desktop. Open Terminal and enter:
dot_clean -m
Enter a space after the -m . Then drag and drop the icon of your flash drive into the Terminal window. It will fill in the path of the drive. Press Enter. All ._ files will be removed from that volume.
Actually, I think it removes all files that start with a period. None of which are of any great importance on a DOS formatted drive. Such as the hidden trash for that drive. The next time you plug the drive in, OS X will simply recreate it.

Hi all, Since I updated to Mavericks I am having trouble with Safari showing all the buttons/clickable options, but they are gray and will not work. Specifically, the Trash Can/Delete and the "Move to" folder button simply do not work. Any ideas?

Hi all, Since I updated to Mavericks I am having trouble with Safari showing all the buttons/clickable options, but they are gray and will not work. Specifically, the Trash Can/Delete and the "Move to" folder button simply do not work. Any ideas?

Please post a screenshot that shows what you mean. Be careful not to include any private information.
Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply.

Wi-Fi has self-assigned IP address 169.254.9.151 and will not be able to connect to the Internet

In trying to setup my AirPort Extreme, it connects to the Internet on ethernetcables to computer but says it is not on WI-FI. I have configured it with all that I casn think of and yet I get, "Wi-Fi has self-assigned IP address 169.254.9.151 and will not be able to connect to the Internet." Can anyone tell me what is wrong?
I did both a soft reset and a hard reset to no avail. PLEASE someone help!!
Thanks!

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

My nano blinks the apple logo when plugged into a charger and will not respond to any reset commands, anyone have experiance with this problem?

My nano blinks the apple logo when plugged into a charger and will not respond to any reset commands, anyone have experiance with this problem?

By a reset, I assume you meaning pressing and holding both the Select (Center) and Menu buttons (or Volume Down and Sleep/Wake buttons on the 6G Nano) long enough for the Apple logo to appear?
What happens if you try to manually place the iPod into Disk Mode? If you can do that, I would recommend connecting the iPod to iTunes and restoring it.
Putting iPod into Disk Mode
B-rock

Sometimes my iPad1 locks up and has the flat battery graphic after charging all night, but will not work until you disconnect the charger, then it reboots and the battery is fully charged and works normally

Sometimes my iPad1 locks up and has the flat battery graphic after charging all night, but will not work until you disconnect the charger, then it reboots and the battery is fully charged and works normally.
It has only happened for the last month or so
Also, sometimes it drops out of apps, ie facebook etc. just like you have hit the stop button

Who replaced the battery? If it wasn't Apple the replacement is probably bad also. Either that, or the logic board is bad.

I have an iMac, and have a Verizon DSL account. Recently, my Mac Mail keeps requesting the passwords on my account every few minutes, and will not allow me to send messages using Mac Mail. I cannot edit the outgoing server; how can I send emails?

I have an iMac, and have a Verizon DSL account (3 email addresses). Recently, my Mac Mail keeps requesting the passwords on my accounts every few minutes, and will not allow me to send messages using Mac Mail (the message says that the outgoing server was rejected. I cannot edit the outgoing server, and the keychain will not save my passwords (the ports are valid). How can I change the outgoing server to send emails, and how can I avoid having Mail request my passwords every 2 minutes? Verizon, as usual, will not provide support to iMacs.

Is there an email saved in your drafts or outbox folder? I suspect that Mail is continually trying to send it, and each time Google is rejecting the email message.
You can open the message and then delete it from your Outbox folder. Then try removing all @gmail email addresses from it and seeing whether you can send to the other folks. I suspect that will work.
With email, if an SMTP server *can* verify email addresses, sometimes it will and it will refuse to send messages. If a message has to be relayed across servers, no verification is done, and you'll get a bounce if an email address is bad.

My paid Student Adobe Cloud had Acrobat XI installed, then along came Acrobat DC. It uninstalled XI, and will not install DC?

My paid Student Adobe Cloud had Acrobat XI installed, then along came Acrobat DC. It uninstalled XI, and will not install DC?

I hit the same problem except I had a Reader X installed not a pro version. For me the solution was to really make sure that nothing else was running. I followed the steps from http://support.microsoft.com/kb/2438651#reso2 the link is goofy so here is the pertinent text:
Programs that are currently running on your computer may be interfering with the installation processDisable programs that might be interfering with the installation process. To do this, follow these steps:
Click Start
, type msconfig in the Search box, and then click msconfig.exe.
If you are prompted for an administrator password or confirmation, type the password, or provide confirmation.
On the General tab, click Selective startup, and then click to clear the Load startup items check box.
Click Services, click Hide all Microsoft services, and then click Disable all.
Click OK, and then click Restart.
Try running your software program installation.
When you are finished troubleshooting the problem, restart the computer in Normal Startup mode. To do this, follow these steps:
Click Start
, type msconfig in the Search box, and then clickmsconfig.exe.
If you are prompted for an administrator password or confirmation, type the password, or provide confirmation.
On the General tab, click Normal startup, click OK, and then click Restart.

FireVault Encryption has paused and will not complete on new Macbook Pro. How do I get it to complete?

FireVault Encryption has paused and will not complete on new Macbook Pro. How do I get it to complete?

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

TS3367 face time has the camera icon with a line thru it and will not complete a call?

Similar Messages

Maybe you are looking for