TS3367 I lose sound after several minutes

I continue to lose sound during a face time conversation 3-5 minutes into the conversation.  The other end can hear me fine, but I can no longer hear them.  I usually hang up and call again and it's fine for awhile longer.  I've called into Apple several times and so far the advisors have never heard of this problem. So far I can duplicate it when using my earbuds or without.  I use my iPhone4S and my sister users her iMAC.  Apple had me reset and test.  Of course the next call I made for 6 minutes was fine.  I made a call to the same person later in the day and could no longer hear 2 minutes into the conversation.

If you can duplicate this issue 100%, then I would advise to bring to an Apple store to show them so it gets documented in the system.  It is a very odd issue because I have never seen anything like that.
Your not receiving a call or switching to apps during the facetime conversation?

Similar Messages

  • I am unable to open Calendar on my iMac - this occurred after installing Security Update 2015-002.  I don't know if related.  A message pops up after several minutes saying Calendar quit unexpectedly (but it never really opens). How do get Calendar b

    I am unable to open Calendar on my iMac - this occurred after installing Security Update 2015-002.  I don't know if related.  A message pops up after several minutes saying Calendar quit unexpectedly (but it never really opens). How do get Calendar back?

    Hi Magsrobby,
    Welcome to the forum and thanks for posting. I'm really sorry to hear you've had so many problems. I can look into this for you if you wish. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
    Cheers
    David
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • My iPad does not automatically shut off after several minutes of non use. I can shut it off with the on/off switch. What can I do to get the auto sut off feature back?

    My IPad does not automatically shut off after several minutes of non use as it had been doing a few days ago  How can I restore this auto feature?

    Settings>General>Auto-Lock and select an Auto-Lock time (the "Never" setting will of course never auto-lock the device)

  • When downloading movies, after several minutes an error message appears with "download error, tap to retry".  Continues to do this.  Any help?

    When downloading a movie on my IPad an error message occurs after recording for several minutes that says "Downloading error - please tap to retry".  The IPand also kicks out of Facebook after several minutes back to the screen meun.  Any advice on how to correct this?  Thank you.

    Hi MartinVernon,
    If you are having issues with iTunes after an attempted update, you may find the following article helpful:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Regards,
    - Brenden

  • HT4623 After downloading 7.0.4 update it says preparing to install and after several minutes it says an error occured while downloading, plz anyone can help

    After downloading 7.0.4 update it says preparing to install and after several minutes it says an error occured while downloading, plz anyone can help

    Hello EvanClayton,
    Thank you for using the Apple Support Community. Due to the nature of your issue or question you may find more information by using another one of Apple's support resources - https://getsupport.apple.com/GetproductgroupList.action.

  • I dropped my phone down the toilet and after drying it out for 3 days, it will turn on but turn itself off after several minutes

    i dropped my phone down the toilet and after drying it out for 3 days, it will turn on but turn itself off after several minutes, please help!

    so is there no saving my iphone 4? even if it works fine when its on, can text and phone, email etc. just turns off and then reloads the apple icon and asks for my passscode again. it almost seems as it wont charge.

  • Overrun error (-10738072​52) occurs after several minutes

    Hello folks,
    I have a LV 7.0 program that terminates after several minutes of running with some VISA serial port communication with an error -1073807252, overrun error. I only get this error on Win98 and the latest version of LV (7.0) and VISA (3.01). Does anyone know what exactly causes this error? The help on the error is not very detailed. I tried the same program on a Win2000 PC and it works without any problems. I also tried another VISA communication program on the Win98 PC and the same error occurs.
    Thanks in advance,
    Michael

    Dave,
    not really a solution, but a suggestion.
    Windows is by far not a real-time OS. And there are several buffers
    involved when doing serial communication.. The first one when watching
    from the serial cable side is the UART. This one is the one that is
    affected by serial handshake. A system driver acts as the interrupt
    service routine ISR whenever this buffer is nearly filled or emtied and
    performs some coying to or from a system buffer. LabVIEW as user mode
    program uses this buffer for ist serial reading and writing. This
    system buffer is often not taken into account. Its default size is
    often not as much as one would expect and some few kB of data may
    easily overrun it. I have learned this when performing serial highspeed
    transfer with up to 13 ports simultanously.
    You can use 'VISA Set I/O Buffer Size' to set this buffer after you
    have configured a serial port. AFAIK one can set the buffer size of
    both directions to a value of up to 32765 bytes. Yes, not 2^15, but
    2^15 - 3. But do not rely on the exact number, please.  Test it on
    your system.
    How can this buffer overrun?
    Well, WinDoze can (occasionally) take some time where nothing happens
    with end user code. This may happen when awakening the hd from power
    save mode or when doing some network actions. And there are a lot of
    other possibel reasons. This does not affect the system driver, which
    fills up the system buffer when serial transfer is in progress.
    Your code may as well operate in 'bubbles' that do not allow to empty
    the buffer in-time. Think of DLL code or subroutine prioritized one.
    All this may be eased if not solved by setting the system buffer size
    to the limit, as it increases the delay your whole system can ignore.
    Just my  Euro 0.02
    Greetings from Germany!<br>-- <br>Uwe

  • I lose sound after about 20 seconds on video in CS6.  It plays fine outside of CS6.  Why?

    I lose sound after about 20 seconds on video in CS6.  It plays fine outside of CS6.  Why?

    And what does "CS6" refer to exactly? In any case, ask in the product forum of whatever program you are referring to and for the life of it provide more info like system specs, file types used and so on.... "This doesn't work" posts are useless.
    Mylenium

  • Wifi connection very slow and interrupted after several minutes

    My wifi connection is interrupted after several minutes. I can restart the connection with wifi assisted, diagnose tool. It indicates always ISP failure. When I go through the assistant, it sows that the network connection was changed, and the wifi connection is back. But only for some minutes, then I have to go the the assistant again, and again and again. Also the wifi protocoll tool did not help me.
    Meantime I don't have any problems with my IPad or Iphone.
    In the web I found plenty of other users with MacBook Pro (Retina) OS X Yosemite, Version 10.10.2 with similar problems. When will apple fix this bug?
    Do somebody has in idea how to fix it?
    Thanks for your support!
    Bird

    You posted in the support forum for the Apple routers......AirPort Express, Airport Extreme and Time Capsule.....the products pictured below:
    But, your post seems to describe a connection issue that you are experiencing with your MacBook Pro.  We are not sure how an Apple router might be involved here if your other devices are connecting well.
    You will likely receive a much faster and more informed response if you post your question in the support area for the MacBook Pro linked just below:
    MacBook Pro

  • Tecra 9100 freezes after several minutes

    My Tecra9100 (P4, 1,8 Ghz) freezes after several minutes. It shows no reaction on keyboard or mouse input.
    It doesn't matter whether I'm running WinXP, Linux or just enter the BIOS.
    Rebooting the system leads to a shorter period until freezing (several seconds).
    First I thought of overheating of the cpu but a small hardware tool shows me that the temperature is normal and the cooling fan works.
    Any idea? Perhaps a problem with the VGA?

    Hi
    Yes, its perhaps something wrong with VGA but I think it could be a memory fault.
    Try to replace the modules and check if there are some performance improvements.
    If not, the technician should check the notebooks motherboard
    You know; Its always not easy to say what could be wrong without any diagnostic procedures

  • LiveCycle/JBoss just dies after several minutes.  Have to rerun Configuration Manager

    I installed LiveCycle ES Turnkey with JBoss on a fresh install of WinXP Pro and it seemed to work flawlessly. I followed the turnkey install guide and it went without any problems. After the install I opened the LC Administrator Console and logged in with no problems. I changed the passwords and poked around a bit. It sat idle for a few moments and the next time I tried to do anything I get the standard Failed to Connect message as if I were trying to browse the web while not online.
    I've tried several things to bring it back to life -- restarting the service (it's 'JBoss for Adobe LiveCycle ES' right? it always fails to stop this service when I try to restart it.), restarting the whole machine, starting the server from run.bat in jboss\bin... nothing works. I have to run the Adobe LiveCycle Configuration Manager again to be able to connect to http://localhost:8080/. I've done this three times now and every time it's the same thing. It works for several minutes and then dies for seemingly no reason.
    I really appreciate any help I can get!

    Hello brianus
    If you have checked for Possible hardware or software conflicts, you may have a hardware problem.
    You sound like an experienced user that has done considerable troubleshooting, but you can consider How to test your iSight to ensure it is functional in case something there might help you.
    If none of those suggestions or Apple's How to Troubleshoot iSight helps you, your iSight will likely need repair by an Apple Service Technician. There are no user serviceable parts in iSight.
    Even if the iSight you bought was advertised as an NOS (new, old-stock) iSight, it may not be covered by Apple Warranty. If the seller is not providing you service guarantees or warranty, you may be interested in Apple's iSight Service: Frequently Asked Questions.
    EZ Jim
    PowerBook 1.67 GHz   Mac OS X (10.4.10)    G5 DP 1.8  External iSight

  • Multiple airport express plug-ins with i-tunes- lose sound after 4 songs

    I have 3 airport express units, a MacBook and 24" IMAC G5 and my music library on a LaCie external hard drive. I have all the latest updates for the airport software on my computers. Now for the problem
    I want to play my i-tunes library, it is over 500G in multiple locations throughout my house. I play from my I-Mac. All airport express connects to my linksys router network. I get inconsistent results when I play my music to multiple locations. After several songs play I have to go back to my computer and repress the speakers to play even though my imac shows the music playing I get no sound.
    This could be because of a simple setting on my i-mac, I hope so. My energy savings for my screen goes off with inactivity after 15minutes. I changed that to an hour yesterday with no avail. I would love to have my music playing throughout my house on a consistent basis. Please help.

    I forgot to also mention that I use the "interference robustness" feature on my IMAC. I have tried it both ways with the same unhappy results.

  • Hi. After the latest update, most websites will not completely download at all, or after several minutes.

    The latest update to Firefox 6 is causing most websites to not download completely, or take several minutes to do so. Definitely did not have this problem before update, witch was only several days ago, I think. Problem does not occur with IE.

    Thanks for the response.  The 30-40 minutes is a maximum; in other words, it usually drops out much sooner (sometimes after 2 or 3 songs), but has gone that long before. 
    My main HDD (where my music is) is solid state, and a lot of times I've even been using the computer when it happens, so good thought, but it shouldn't be that. 
    It did give me a thought though.  Sometimes on this computer I experience pauses because I have a constantly active backup drive, and it waits for the drive to catchup.  I can try turning that off and seeing if it makes any difference.  Definitely something I hadn't thought of yet.  Probably be a bit before I try it, but I'll let ya know. 
    Any other suggestions in the meantime most appreciated!

  • Imaging stops after several minutes

    Hi!
    Im trying to set up PXE and Imaging and have get PXE to work.
    I wanted to test with one computer and used C1 to assign policy to this
    computer to take image with next boot.
    The PC boots up from network and received IP-adress. It shows up with
    somekind of SUSE boot-picture and comes up with a menu. Now the computer
    seems to hung up and it doesnt respont to keyboard. I can only switch
    screen like in Linux ALT-Fx
    After many minutes an error-msg shows up and says it can't connect/find
    the image-server and then reboot.
    The image-server is running on the same server it boots from (PXE-server
    and pdhcp).
    On console the Image Server screen says now "Update Request = 4", so some
    kind of connection must have been doen.
    Im using ZfD7, but i guess there is no different from ZfD6.5
    Server is NW6.5 SP5
    What can be the problem?
    Sendt med Operas revolusjonerende e-postprogram: http://www.opera.com/mail/

    On Fri, 04 Aug 2006 12:45:27 GMT, Ronny Simonsen wrote:
    > Im using ZfD7, but i guess there is no different from ZfD6.5
    > Server is NW6.5 SP5
    there is a ZDM 7 imaging forum..
    could you post a log file?
    If you have already compiled drivers or have linux.2 please put them on
    http://forge.novell.com/modules/xfmo...ect/?zfdimgdrv
    Live BootCd and USB Disk from Mike Charles
    http://forge.novell.com/modules/xfmod/project/?imagingx
    eZie http://forge.novell.com/modules/xfmod/project/?ezie
    Marcus Breiden
    If you are asked to email me information please change -- to - in my e-mail
    address.
    The content of this mail is my private and personal opinion.
    http://www.edu-magic.net

  • Network crashes after several minutes

    Hi folks,
    I was using LFS for some time and now switched back to arch because of the anoying updates.
    I was using the exact same hardware about one to two years before with Arch and there wasn't any problem, so I guess the bug is in the software (or the end user ).
    I'm using the ndiswrapper + dhcpcd / dhclient (problem is the same on both), all from the arch repo.
    After a few minutes being online (this problem occurs more quick if I do several online tasks at once, like torrent + jabber + surfing, or even loading several webpages at once) my network crashes completely.
    With crashing I mean: I can't even kill dhcpd nor unload the ndiswrapper module, if I try the process is loading about a few minutes and then completely freezes (I can't kill the kill proccess, funny somehow). I also checked every log but I just can't find anything in them (nor can I find a special dhcpd / dhclient / ndiswrapper / networks in general log).
    I hope one of you guys can help me because I don't want to switch back to LFS.

    I tried different solutions till compiling both: an older kernel and an older ndiswrapper version, but none of them made any difference.
    I guess I'll have to switch back to LFS for now which isn't a huge problem.
    I just hate to remember and update all packages myself .
    But thanks anyway, I'll switch back to arch in a few month and try it again.

Maybe you are looking for