TS3367 Problem: Cannot hear the other caller on facetime?

I have an IPod Touch 4th Generation, She has a New IPad. We facetime.  Here's the problem: I cannot hear her at all. 
Further, she has successfully facetimed her friends (who have IPhones) without any issues.
Solutions?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

Similar Messages

  • Cannot hear the other person when using Skype.

    When receiving a video message via Facebook (skype) cannot hear the other person. They hear me but I don't get any sound. Please help. Thank you.

    Both of you can take a look at this help Guide from Skype:
     Making a video call (Windows desktop)
    Kind Regards,
    Dragon-Fur

  • Lumia 800: cannot hear the other side when receivi...

    hello all.
    i had recently upgraded to w7.8 for my phone, and problem started coming.
    i cant seems to hear the other person when i get or make calls, and they cant hear me too. 
    i get this problem quite often, and i tried factory reset, and no data is loss( i wonder do i perform the resetting correectly)
    i tried off and on my phone again. same thing still happen occasionally.
    what is going on? PLeAse help!!!
    the phone is only 2 months old and never drop/bump anything.

    If you can't hear the caller THIS may be helpful ..but if the other end can't hear you then may be you need to visit Nokia Care
    BTW, How did you do the Factory reset ?

  • FaceTime - I cannot hear the other end at times and the mic now has a forward slash in front of it and I can't get it to go away

    FaceTime-at times I cannot hear - no audio - the person on the other end.  The mic now has a forward slash over it and I cannot get the slash to disappear.  At times I hear the other end even though the forward slash is still there.  I believe I have checked all of the settings.

    If they don't show up on screen captures, it's most likely a hardware failure. Make an appointment at the genius bar.

  • I can't hear the other person while facetiming on the Imac

    I cant hear the other person while face timing on my imac but they can hear me

    HI,
    There have been similar issues with iChat and I will use that as an example first.
    In iChat the Mic needs to be On (in the Video menu).
    It also needs to be listed in iChat Menu > Preferences > Video section > Microphone Drop down and this needs to match ther Mic set up in System Preferences > Sound > Input.
    In addition to this the Mic needs to be "turned up" high enough in the System Preferences to work with the app.
    So If you Buddy cannot hear you it is your Problem when it comes to iChat.
    If you cannot hear the Buddy it is much more likely that they have not set up the Mic in System Preferences or have the Mic Off in iChat.
    Moving to FaceTime you will find a Mic Setting in the Video menu (if you have two or more Mics).
    If you do then the System Preferences > Sound > Input  and the volume setting there needs to match the choice in the App.
    As it is your contact that you cannot hear you need to get them to check their settings first.
    As for your end, it will be worthwhile doing a PRAM reset.
    Shut down the computer.
    Restart it holding down Apple/CMD ( or ⌘)+ALT( ⌥)+P+R Keys until you have heard three Start Up Bongs.
    9:06 PM      Thursday; June 27, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Cannot hear the other side when they use earbud (w...

    no additional information is needed I guess.

    If you can't hear the caller THIS may be helpful ..but if the other end can't hear you then may be you need to visit Nokia Care
    BTW, How did you do the Factory reset ?

  • GE 31591GE - cannot hear the other person after co...

    Hi,
    I am using a Skype GE phone 31591GE.
    Since couple of weeks, only with the contacts that updated their skype version, the sound stops after couple of seconds of conversation. The other person is still able to hear me when the event happens.
    With other skype users, with older SW version, it keeps working well. 
    On the GE phone, it is shown that it has the last updated version.
    Could you please advise a solution?
    Thank you!

    Hi,
    Thanks for dealing with this issue.
    Basicaly, the problem started with the Skype updates from Mid-July. Any Skype version released from Mid-July on, has this issue.
    If my understanding is correct, it is the same issue with:
    http://community.skype.com/t5/Hardware/FreeTalk-ConnectMe-adapter-problem-noise-instead-of-normal/td...
    "If you enable "tech info" on another side, than you can see: at few first seconds encoding sample rate (SR) is e-8 000 Hz, then changed to 12 000 Hz or 16 000 Hz."
    So fixing this issue might solve many other problems.
    Thank you!

  • Can't hear the other person on Facetime

    Hi guys
    So i've been trying to use Facetime but everytime i start up the app, the sound completely cuts and is not recognised. The Sound icon in the top bar turns grey and whenever i try turning up the volume using the keyboard, the Speaker icon comes up with a line through it.
    Any ideas on how to fix this?
    I can see the other party, and they can see and hear me, but i cannot hear them.
    I'm also experiencing the same problem on Skype
    Si

    just spoke to a tech...if you are using an Ipad...go to settings - general - reset - reset network settings (you will have to re-enter your wifi password). According to tech, this should resolve the problem...if it doesn't, then you will have to reset device to default and reload your backed-up info back onto your device.....I haven't tested it yet because the only person I facetime with is not home yet.

  • When making a phone I can hear the other caller but they can't hear me

    No one can hear me when i make I phone call but I can hear them ??? I've tried the voice memo and that seems to work fine !!! Has Any one got any ideas that could help me please ???

    you need to isolate wetyher or not its a hardware issue.
    make a voice memo. (if there is sound then, your bottom mic is fine.)
    Make a video (if there is sound then your speaker mic is fine.)
    if those dont work restore to factory settings and setu p as new, if the issue persists, setup replacement
    if you have sound, try resetting your network settings. (settings general>reset>reset network setting THIS WILL DELETE ANY SAVED WIFI PASSWORDS.)

  • Cannot hear the other party after greetings for the past 3/4 days

    My father is in Uzbekistan, and me and my mother are in Russia and after the call connects we exchange greetings and all words turn into isolated sounds? Is there a reason for this? Will this be fixed any time soon or is this a connection problem?

    Hi,  I have been having similar issue, while calling my family in Uzbekistan. I can send texts only. Audio and video are not going through. So, the Uzbek authorities say it has to do with maintanence work currenly under way and this will continue unitl August 31. 

  • I cannot hear the other person talk on my new iPhone 4s

    Whyyyyyy???

    Have you pressed the volume up on the side of the iPhone? Also, is it with everyone who calls or just a certain person?

  • When using Facetime on my iPod touch, I cannot hear the other person.  Help!, When using Facetime on my iPod touch, I cannot hear the other person.  Help!

    No, the mute button isn't on.  Yes, I've shut down and rebooted and did a backup/sync as well.

    See here http://support.apple.com/kb/HT4319

  • When i make a call i cant hear the other person or its super quiet

    when i make or recieve a call i cant really hear the other caller, its super quiet and they have to shout! i can hear them fine! theres no case on the phone and its not on silent, volume is at maximum, any ideas guys why its like this? cheers x

    If there's no obstruction in front of the headphone speaker and the volume is pumped up to max, the component may be kaput. So yeah, a trip to the Store will be inevitable.
    My boss got an i5 in mid--Jan.  Not a week later, her callers started complaining they couldn't hear her. She eventually ended up in the carrier's customer center (no Apple Stores over here), where they gave her a new-from-the-box replacement, no questions asked. You may get lucky too.

  • When I answer my iPhone 4s, I cannot here the person calling unless I switch to speakerphone.  How can I fix this?

    When I answer my iPhone 4s I cannot hear the person calling unless I switch to speakerphone.  How do I fix this?

    does it work with the headset connected if so then it's stuck in headset mode
    https://discussions.apple.com/thread/1343532?start=315&tstart=0

  • Unable to see the other person in facetime

    i cannot see or hear the other person in facetime, but they can see me. I've tried all the options given here and none has worked. what can i do?

    Hello,
    You need to manually transfer the books.
    You may use email etc, to transfer books
    Thanks

Maybe you are looking for

  • Running a Dynpro-based Report as a Job/in Background mode

    Hello, i've got a report which hasn't got a selection-screen as its startscreen, but a complex dynpro and is based on different start-buttons and not only the "basic" F8/Run-Button. the users still would like to be able to run the report in backgroun

  • Images uploading

    Intermedia problem We have developed a stored procedure to upload images on Database 8.1.5 on WNT server. Launching the procedure we get the following error: The following error has occurred: ORA-04068: existing state of packages has been discarded O

  • How do I access reload and stop in the new verson of firefox?

    How do I access the reload page and stop buttons on the newest version of Firefox. If they are not available you need to put them back.

  • Error While moving the Partition

    Hi I am trying to move a partition to a specific node(xxxxx2:30003) using below sql ALTER TABLE "schema_1"."table_1" MOVE PARTITION 1 TO 'xxxxx2:30003' It is throwing following error SAP DBTech JDBC: [2048]: column store error: fail to cleanup for mo

  • Where can i Find the ESN/MEID/IMEI number to file an insurance claim

    I am trying to find the number for the Samsung Galaxy S3 and the phone was lost.