TS3367 Still having trouble connecting to FaceTime it's still saying network connection
It's says could not sign in . Please check network connection
You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists.
Similar Messages
-
I am having trouble getting on Facetime. It keeps saying Facetime Failed.
Are you connected to wifi
do you have factime turned on? -
Having trouble connecting to FaceTime.
Im having trouble connecting my facetime. i enter my apple ID and passward but its not working and asks me to check my network connection. having doing so my connection is fine but still not working???
tplush,
I also have same issue here, facetime is blocked in here. Maybe it is because your location which did not allowed the Facetime. -
My ipad is connected to my wifi, however when i try to sign my ipad into facetime is says that it is having trouble connecting. I use my wifi to get on the internet on my iPad so i have no idea what the problem is. Help Me
- Did it successfully connect to the network before?
- Do other devices successfully connect to the network now?
- Does you iPod successfully connect to other networks?
- Have you reset your iPod?
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Reset network connections: Settings>General>Reset>Reset Network Settings
- Powered off and then back on your router
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections
-When you restored you iPod did you restore to factory defaults/new iPod? If not try that.
- If you look at the network properties on the iPod what IP address is assigned when you think you are connected but actually have no internet connection. If it starts with 169 then the iPod never connected to the router, the 169 address are self assigned. -
Is anyone having trouble connecting on facetime
is anyone having trouble connecting on facetime
For EUROEAN customers only, here is the e-mail address where to send the complaint about FaceTime not working, I already did! & the more the better:
[email protected]
and also here is their EUROPEAN Customer Care centre postal address:
Apple Customer Care HOLLYHILL Industrial Estate, HOLLYHILL, CORK, Republic of Ireland.
Let's get moving, so there is no more the excuse -- oh but I didn't know …. -
im having trouble connecting my macbookpro to the tv. im using a mini display port to hdmi adapter, when i switch tv/video to hdmi on the tv nothing pops up, and i dont have the arrangement tap on the display settings, please help!
I've found that the order of operations, so-to-speak, can be important when hooking up mini display port to HDMI. I have the most success with the following operations in this order:
1) Plug HDMI cable into mini displayport adapter (the cable should not be plugged into either the TV or the computer at this point)
2) Plug the mini displayport end of your new super-cable to the computer.
3) Plug the HDMI end into your TV.
4) Switch inputs on your TV to the proper input.
5) If still nothing on the TV, try a different HDMI port on your TV.
Hopefully this helps! Good luck. -
I am having trouble connecting IPAD1 to wireless any suggestions?
I am having trouble connecting my IPad1 to Belkin Wireless Router. It was working fine until a couple of days ago. I can use my IMAC okay via wireless. I can see my network on the IPad, but message comes up "unable to join the network XXXX". I have read the Apple recent release to fix this problem...still no luck. Can anyone please help?
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Cheers, Tom -
I'm being shown an error pop-up message periodically saying "There was a problem connecting to the server. URLs with the type 'file:' are not supported." I have a brand new MacBook Pro, and at no time am I actually having trouble connecting to the server, but this message continues to pop-up several times a day at random intervals. Is there something I'm doing wrong? Or is my computer just having a glitch? Other than that, and a mildly sticking caps lock button, it's working perfectly.
Thank you!Alright it didn't solve it. Any other suggestions?
I haven't suggested a solution yet. I want to know whether you still get the messages while Time Machine is disabled. Do you? If so, try any or all of the solutions proposed in this thread:
There was a Problem connecting to the...: Apple Support Communities -
I have renewed my CC subscription through school for another year. My account is showing that it all is well and in order- but I am having trouble connecting to the taskbar- the Apps page is just a spinning circle and has been since last night. My programs think I still have only 2 days left of my subscription. And I think this problem is stemming from not being able to connect to the App Updater. What do I do? I really don't want to reinstall the whole of the CC suite if it can be avoided.
Mac Spinning Wheel https://forums.adobe.com/message/5470608
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
Having trouble connecting to FaceBook (fb) via my iPad
hello . . . I am having trouble connecting to FaceBook (fb) via my iPad . . . I seem to connect to other sites easily, but fb is a no-go. My fb account on the computer is working brilliantly.
Error Code: FBAPIErrorDomain
Any suggestions . . . pleaseYep. Good point.
To completely shut it down, even in the background, double click the home button to display the row of apps. Then press and hold the Facetime app until the app displays a minus sign. then touch the minus sign.
The app is now stopped ! -
I am having trouble connecting to my in-home internet via my wireless router. The IPad says I'm connected to the router, but I am unable to receive email, Facebook and Safari. I run through Charter Cable. This only occurs on my IPad. My desktop works fine.
Although it may ultimately be necessary to perform a Factory Default Reset on the AirPort Extreme and start over with a new configution, we can first try to see if things will work with the existing settings on the device.
Push the reset button (if present) on the cable modem
Power off the modem by pulling the power cable
Remove the internal battery from the modem (if easily accessible)
Power off the AirPort Extreme and every other device on the network....order is not important
Wait at least 20 minutes....longer is better
Re-install the battery in the modem if it was removed previously
Make sure that the Ethernet cable from the modem is connected to the WAN port (circle of dots icon) on the AirPort Extreme
Power up the modem and let it run 4-5 minutes buy itself
Power up the AirPort Extreme and let it run 4-5 minutes
Then power up each other network device one at a time about a minute apart
Check for a good Internet connection on the network with all devices
If still no luck, you will need to perfom a Factory Default Reset on the AirPort Extreme as follows:
Pull the power plug from the back of the AirPort Extreme
Hold in the reset button and keep holding it another 8-10 seconds while you simultaneously plug the power back in to the AirPort Extreme
Release the reset button and allow 25-30 seconds for the AirPort Extreme to restart to a slow, blinking amber light
Then open AirPort Utility end reconfigure the AirPort Express again. -
I am having trouble with my FaceTime and imessage?
I Am having trouble with my FaceTime. When I try to FaceTime some one I am getting no ringing and then I get a message saying lost connection try again. It has been like this since yesterday. I also tried to send a iMessage and it did not go. This is all new to me, has anyone had the same problem? Please help. Thank you.
Turn FaceTime off in Settings>FaceTime>Off. Reboot your iPad. Turn FaceTime on again and see if it will work.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
Im having trouble connecting to my old HP 5MP on small network
Im having trouble connecting to my old (but still a great printer) HP 5MP which is connected (be causes it has no ethernet built in) via an Ansante eternet/localtalk bridge to the ethernet network and ti my old G4 Power PC Quicksilver (using 10.4.11). That is shared both by ethernet and (via my vodafone wireless router to my 21" iMac Macbook Pro. When I bought my new iMac and MBP I kept my old G4 so I could still use by SCSI Scanmaker E3+ scanner and my non-USB, non ethernet printer by sharing it from the G4. Worked OK but now not so over either wi-fi or ethernet. I just updated to Lion on the iMac and am on Snow Leopard on the MBP and they say they can't find suitable drivers. My work around has been to print to "Mail pdf" to myself and pick it up on the G4 and print from there direct to the 5MP. But now I can't even connect to the 5MP from there since downloading a software update which was something about enhancements to Airport.
Have tried resetting tie printing system, repairing disc permissions and rebuilding the drive using diskwarrior on t he G4 but now I can't get any mac to see and add the 5MP. My old Epson Photo stylus 1200 works OK on USB but I need my 5MP tp work. Can you help on that please?Those converters like the AsanteTalk are notorious for not re-acquiring Printers that drop out for any reason.
Get everything else powered up, then cycle off the AsanteTalk, count slowly to 10, then power the AsanteTalk on last. -
Has anybody bought an Epson XP 205 cause having trouble connecting to wifi
Hhas anybody bought an Epson XP 205 cause having trouble connecting to my wifi (which is sky broadband) I have the Epson app but it cannot find the printer has anybody got any suggestions?
I am so disappointed! The exact samething has happened to me, AND my husbands Touch. We had no problems before, and as you say with 2.1 a little stared - I ignored it because I love and defend my touch. After 2.2 all heck broke loose, I went to the genius bar and of course it ran perfect there. I had numerous screen shoots in one day, 'failed to connect to server, safari server, gmail server' - timed out blah blah blah, so they suggested I call my internet provider, they run a test and everything fine, they suggest I call the router people, ten bucks later and with nothing really showing a problem with the router our Touches still do not work like they used to. I am NOT buying a iphone, I want Apple to fix it or tell me how, it worked fine before what the heck gives, I wish someone could answer honestly.
Thanks for letting me get that off my chest, I really hate to switch to Zune as my nephew has been bragging about.
CC -
WRT54G having trouble connecting
i am having trouble connecting to the wireless interent with my WRT54G
i do have an internet connection ( i can plug the erthernet into my computer diredctly and get a connection)
my ptc/ip setting is correct ( obtain autonatically)
i am suspicious that the router may not be working properly
i plug the power into the router and the internet connection light is on solid ( there is not any ethernet connected to it)
also the 4 port lights are on solid ( not any ethernet wire connected)
i have tried unpluging for a few minutes and pluggin back in / rseting for 10-20 seconds still nothing
any help would be aprriciated thanksConnect your modem to the internet on the linksys router...Connect a computer to ethernet port1 on the router...
Hard reset your linksys router...
Press and hold the reset button for 45 seconds...Release the reset button...Unplug the power cable from your router, wait for 45 seconds and re-connect the power cable...Check the lights(ethernet port1, power, wireless and internet lights should be lit)...
If you see the above mentioned lights, then, you can re-configure your router...
If your Internet Service Providor is Cable follow this
If your Internet Service Providor is DSL follow this -
hello i have been having trouble connecting to any wi-fi. ive tried everyting and can not connect to any wi-fi avalible. i have also rest my iphone 4s to factory settings and can still not connect to a wifi. what can i do?
If you cannot connect to any Wi-Fi then try is a reboot of your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
If that doesn't help try resetting all Networks.
Settings > General > Reset > Reset All Netowrk Settings
Still no help? Then make an appointment at an Apple Store for a consultation.
Maybe you are looking for
-
HT1391 how can i get a purchased movie from apple tv onto my macbook & iPhones?
ive purchased many movies from itunes on my macbook & iphone(s), & have no problem sharing them on all devices. i just purchased apple tv 3rd gen & bought my 1st movie on it, but i can only watch it from the apple tv its not on my macbook or iphone
-
My iPod Touch died, and I received a replacement from Apple. I restored it from my last backup, using iTunes. This reinstalled my apps as well. These included iBank Mobile and Documents to Go. I have the desktop versions on my MacBook. When I at
-
Error in FM RV_MESSAGE_UPDATE in MIGO transaction
Hi, I am facing the the error in FM RV_MESSAGE_UPDATE for MIGO transaction as below: Report SAPLMIGO Transaction MIGO Error details Class: FPRUNX Error Number: 102 - No job started Status : Update was terminated I have check
-
Mail No Longer Working On WiFi
Just discovered a very strange issue. My e-mail accounts no longer send or receive on WiFi. This happens at both at home, and at work. Mail still works fine on Edge and 3G, but not WiFi. I can still access the internet via WiFi, so I'm really confuse
-
We are running EP6 SP2 patch 3. If I select the details option for a document in the portal KM repository, then the resultant pop-up window includes a Collaboration menu item that allows me to give feedback or write a review. When I do the same for a