TS3367 When calling my husband he has less than 1 second to answer? Same when he calls me!

Help, when I FaceTime my husband he has less than 1 second to answer...if we hit accept during TNT second, it still doesn't connect?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
 Cheers, Tom

Similar Messages

Vld 004 error - partition key has less than 2 partitions defined

HI All,
i have created a new table with a partition on one colunm. when i am trying to validate the table in owb, i am getting the vld-904 - partition key has less than two partitions defined error.
please help.
thank you.

Hi,
Oracle DB requires that a partitioned table has at least 2 partitions. That is why you get an error from owb, the table creation would fail anyway.
Regards,
Carsten.

HT1040 trying to make an ibook and have 800 photos, want format of 8 photos/page, but default is not that- "create" the initial book from iphoto "album" it loads less than 800 pics and then when i change layout i have blanks.

trying to make an ibook and have 800 photos, want format of 8 photos/page, but default is not that- "create" the initial book from iphoto "album" it loads less than 800 pics and then when i change layout i have blanks.
if i clear the book so that it is all blanks and then try to load in the pictures i have it loses the chronology of the pictures that i had established in the album.
is there a way to import photos into an ibook template and keep the original order of the photos without having to do them one at a time?
also, is there a way to insert a photo rather than just dragging it? i have tried the cut and paste funciton but it doesn't seem to work, the target site doesn't seem to register with iphoto.
many thanks for your help.

Photos are added to book in chronological order. So if you want to add them to a book in the order you have placed them manually in an album do the following:
1 - select all the photos in the album.
2 - use the Photos ➙ Batch Change ➙ Date menu option as shown here. Select any date and add 1 minute between photos.
3 - select just one photo from the album and create a book from it.
4 - in the book click on the Options button ➙ Book Settings button and make sure the checkbox for Auto-layout pages is unchecked.
5 - drag the album with your book photos onto the book icon and they will be imported into the Photos tray of the book in your pre-determined order but not into the pages themselves.
OT

Form has missing values when the database sourced column is less than 0

Hello,
I have Apex 4.0. I am making a very simiple form on a table with lots of number columns. When I go into the form linked from a report, it pulls all of the values in from the table for a certain row except for the numbers that are less than 1. Very strange.
Any ideas?
Thanks,
Mark

Joe Upshaw wrote:
No, there is, for sure, no such restriction, Mark. To convince yourself of this, just manually add a Page Item to your form. Set "Display As" to number field and set the default to -999. It will display -999.
Could it be a mismatch between the data type of your source SELECT and the "Display As" on the form field? On the main report, what is the data type for the corresponding column?
On the field, is the Source Type "Database Column" and is the "Source value or expression" set to the correct, corresponding column name?Also
When I go into the form linked from a report, it pulls all of the values in from the tableHow does this happen?
Any other processes run on page rendering?
Any Post Calculation Computations or Format Masks used on the form items?

Calling a dll that has an unsigned char, unsigned char * in a function call

I have a dll that has the following function that I am trying to call from LabView
GetAvailableData( unsigned short * Num1,   unsigned short * pList,   unsigned short in,   unsigned short * ip  )
In this, the second parameter is an output. When I use call library function node, I use the second arg to create an indicator. When I run this program, I see the return value to be zero.
I use the following for arg2:
Name: arg2
Type: Numeric
Data type: 16bit Integer
Pass: Pointer to value
Any help is appreciated.

dinks-
   Just some janitorial work first: when posting try and keep the spaces between lines to a minimal. Empty spaces just means less memory somewhere. To your question, I think some clarification is needed. Tell me if this is right, you have a dll that you are calling into LabVIEW using Call Library Function node and then trying to get this unassigned character.
Yes. That is correct.
It returns 0 but it should be giving something else (what should it be returning?). Are you getting any errors running this or you are just not getting the expected value back? Thanks for the clairfication!!
Thanks for the response. I think there are lot of nitty gritty details when calling a c++ dll from LabView that I need to learn. The unsigned char problem is solved when I modified the output to Array in Labview.
I have issues using C++ functions that return a bool value.
The other problem is with C++ functions that return a HANDLE.
In the first case where the return value is bool, I assigned the return value in LabView to Signed 32 bit integer when I call this function,  the return bool value is some large number always irrespective of the C++ bool value (true or false).
For the second case (return type HANDLE), I assume, I should specify the return value as signed 32 bit integer in the configure option of call library function node. I tried that and it returns the same value. The dll returns non zero if my hardware that I am interfacing with is found. If it doesn't find the hardware, the return HANDLE is 0. The Labview program returns the same value if I enable the hardware or disable the hardware.
I am following the Call DLL.vi example for using various data types in C++.
Really appreciate your help.

How is it I purchased a brand new phone less than 30 days ago and when defective I'm given a used phone and find a replacement sent slow mail?

I opened an account with added lines with Verizon about Nov 14th. Not 30 days has passed and yesterday in the middle of using my fully charged HTC One M8 Windows phone the screen went dark. I can hear incoming service but of course the phone is useless.
I was promised a replacement and told by the tier 2 support person last night that the replacement would be out overnight. I checked earlier and no status was available, and I checked now after waiting today for the phone, and now I see the phone was not sent overnight, and further that I will be sent a "like new" used replacement. I paid a substantial down payment and will be continuing to pay the new phone price, but now I am being given a used phone though still paying for new.
I am really unhappy about how this less than 30 day customer who is not going to a discount carrier is getting treated. Someone credited me for the few days service I am out...but that still does not resolve the used phone issue. Is this something I need to take up with the BBB?

Sucks, but it is in the contract you signed. Within 14 days, return the phone and get a new one, after 14 days, it is a used phone and gets replaced with a used phone. I had this happen to me, felt a bit cheated, but you know what, that phone lasted the entire rest of the contract without issues and continued to work when I passed it on to family.
The only alternative would be to work directly with HTC, the manufacturer of the phone and try to get a new replacement. However, almost every company does exactly what Verizon does in this situation. Since Verizon is keeping to the terms of the agreement you both agreed to, the BBB will not see any problem and not have any reason to act.

HT201209 I fecentlynrdeemed an I tunes card but when I downloaded some tunes( to less than the vale of the card) it has not been deducted and has come out of my registered card instead? I do not have the iTunes card anymore to pinput the number again. An

where can I find the credit of £25 which I redeemed the other day.
I downloaded some music and film from iTunes yesterday but my card has been used and not my iTunes credit?

where can I find the credit of £25 which I redeemed the other day.
I downloaded some music and film from iTunes yesterday but my card has been used and not my iTunes credit?

How to choose which one to use when using handoff if one has more than one phone with different network

I am using 2 iPhone with 2 different network. How to choose which phone to use when making a call.

Are you confirming your POP account is selected as the sending email account before the message is sent?
And regardless if the email is a new email or is replying to or forwarding an email received by the POP account and cofirming the POP acconut is selected as the sending email account, the message is sent by the Gmail account?
All message sent by the POP account are sent by the Gmail account?
If so, delete the Gmail account from your iPad and test if a message sent with your POP account which will be the only email account available with the iPad's Mail app is recieved from your POP account/address.
If not, something else is wrong or on play that has nothing to do with the iPad.

HT2729 How can I download an HD movie from iTunes to a MacBook Air as it has less than 2GHz Processor.

Apple won't let me download an HD movie from the iTunes store to my Macbook Air 13 inch as it has a 1.8 Ghz processor and not the 2.0 Ghz processor it says HD movies need to play. Yet this computer has enough power to play them. How do I fix this?

Hello maxr0,
Thank you for using Apple Support Communities!
I found this article that outlines where to go to download your purchases again in iTunes.
The article named says it is for iTunes 10, but the steps will work for iTunes 11 as well.
In iTunes, click iTunes Store (below Store).
Click the Purchased link in the top-right of the Store home page (below Quick Links).
In the page that appears, select a category.
iTunes shows you which of your purchases are available for download. You can view all of your past purchases, or just the ones not currently in your iTunes library. Items already in your library aren’t available for download.
If you select Music, you can view your purchases by song, artist, or album. If you’re using Album view, click an album to see which songs on it are available for downloading.
To search for an item, type its name or a keyword in the search field, and then press the Return key to view your search results.
To download an item, click the Download button to the right of the item.
From: iTunes 10 for Mac: Download previous purchases from the iTunes Store
http://support.apple.com/kb/PH1706
Once you get to the page for your Movies or TV Shows, there should be a checkbox that says Download HD When Available. Uncheck that, and then download your purchase and that should get you the SD version of your video.
Take care,
Sterling

My iMac has less than 2 years. The hard drive from 1TB just failed. Possible to recover data?

The support store just told me that the hard drive of my IMAC 27" is damaged and the solution is to replace for a new one. Meanwhile, I saw this: "Apple has determined that a very small number of Seagate 1TB hard drives used in 21.5-inch and 27-inch iMac systems, may fail under certain conditions. These systems were sold between May 2011 and July 2011."
I bought my system a couple of months before. Anyone knows if it's the same hard drive?
Another question is. Is it possible to recover recover the data from the damaged drive?
Best regards

If the hard drive has failed then that data is lost. That's why you always need to maintain an up to date backup copy of your important files on an external backup hard drive. Hard drives do fail; being an electro-mechanical device they are the weakest link in any computer.
Hope this helps

My computer has more than one login. Now when I log out it just brings up a blue screen and won't let me do anything eles. What's wrong with it?

Now it just brings up a blue screen and it won't
Let me do anything eles. What's wrong with it. This is the second time it's done it today

I am experiencing the same thing on log out, not all the time but too often. I can get going again by shutting down with the power button, waiting 10 sec. then pressing the power button to boot up again. I have run Disk Utilities, Techtool Deluxe and Disk Warrior which all indicate everything is OK. So I am hoping someone will be able to help us with this issue.

80gb iPod has less than 75gb capacity normal?

I just received my brand new 80gb iPod Video, which turns out to have only 74.37gb capacity. Is this "normal"? Should I send it back for a replacement? What's your iPod and the actual storage capacity? Thanks, L
iPod Video 80GB Windows XP Pro

pic stolen from german wikipedia.
http://upload.wikimedia.org/math/6/d/c/6dcbef1bef33e1e2e65c63144cd3ee78.png
80 gb @ 1000byte - marketing. :P
74,51 gb @ 1024byte - correct.
every HD manufacturer uses 1000byte instead of 1024byte on the label - it sounds like "more space".
wikipedia in english -> http://en.wikipedia.org/wiki/Hard_disk
(sorry, little drunk, weird english...i know :P)

Downloaded the latest OS X and now my Mac shuts down about 5 times in less than 10 minutes. Also when I press my cap

I tried to reinstall everything but instead of to old version it want to install Maverick again. Any suggestions?

Check to see exactly which OS X is installed ..
Click your Apple menu  top left in your screen.
From the drop down menu click About This Mac.
Which version do you see?
Make sure your Mac can run Mavericks > OS X Mavericks: System Requirements

Why when it has less apps than my iphone does my ipod touch say it got 4gb on it when synced to itunes ect

why is my ipod touch showing when synced to itunes that it has 4gb of apps when there are 9 apps on yet my iphone that has the same apps and lots more says it has less than 1gb, can anyone help please as cannot put any music on the ipod touch. thanks

try connecting the Touch in recovery mode, then set it up as a new device.
if that fails, you might want to try to put the device in DFU mode.

How to get siri to recognize another contact name, when the contact name she has does not exist.

Siri could not understand me when I asked it to call my husband, (he has a name I have a hard time pronouncing) so I put in a middle name for siri to understand. I then deleted the middle name from his contact, however, siri still tries to text/call that contact when prompted even though it does not exist.

Hi Romano & Detlev ,
Thanks for the reply .
This is what I was looking
Detlev:
About the NPE ... in the above code I am not getting that.
Thats my mistake
Earlier I tried with
IResource rsrPublished = (IResource)event.getParameter();
String rid = rsrPublished.getRID().toString();
In the second line of code I was getting the NPE
after that I used to if condition to debug it
Sorry for the confusion...
One more thing
which is the event triggered for approval or how to capture the Approval Event when a content is approved by the Approver
thanks
pk

TS3367 When calling my husband he has less than 1 second to answer? Same when he calls me!

Similar Messages

Maybe you are looking for