TS3408 What on the Router or DNS server would cause this?

Good information and easy steps to resolve. My question is, what is wrong with my DNS or Router that is causing an issue with Pre-Fetching? An ideas on what would cause the issue?

Not all DNS severs prevent pre fetching.
Try this...
Open System Preferences > Network > Advanced > DNS
Click + and type:
208.67.222.222
Click + again and do the same.
208.67.220.220
Click OK.
Or try the terminal command from that link.

Similar Messages

WRT54G....Can I set DHCP to use the router for DNS instead of external DNS?

Hi folks. I cant' get my router to have DHCP tell my PCs that the router should be the DNS server instead of the external servers it is using. I am using Comcast Cable internet. It sets the external DNS servers for every PC that connects to it and I have problems finding my PCs on my network by NetBIOS name because the external DNS servers obviously don't store my local PCs. How can I set the router up to set DHCP to use the router for DNS?

If you cannot set the DNS server in the configuration page for the DHCP server in your router then your router does not support this.
This won't solve your problem though. The DNS server on the router is a simply forwarder. It simply forwards the DNS requests from your computer to the ISP's DNS servers. The DNS server does not accept dynamic updates to a private zone inside your LAN. And DNS is pretty much unrelated to the standard windows workgroup browsing which does the actual name resolution inside your LAN. That name resolution even works without a router inside your network. Basically all windows computers in your network periodically broadcast their name to the network. One windows computers is elected "master browser" which collects all these names and provides the name resolution service for all computers in the workgroup.
If this does not work it is most likely a windows configuration problem. It could be a software firewall on the computers which blocks traffic. It could be that the computers are not setup for file/printer sharing and thus have the computer browser disabled. It could be that your computers have a WINS server configured which does not exist. There are probably more causes. The better source to ask this question would probably a Microsoft support group. They deal with these kinds of issues more often and maybe a MVP may be able to point you into the right direction or give some links to step-by-step instructions...

What is the fastest/ best DNS to use with Infinity...

I'm using a seperate DHCP server in my home LAN which gives me the ability to asign different DNS servers. Ive previously used Open DNS which seems a little slow, so I'm currently passing the routers IP address as the DNS server which works fine, but I suspect it is sub optimal. Based on the experience of you folks, what are the best/fastest DNS servers to use in conjunction with Infinity (Specifically 100 Mb FTTP)?
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the the reply answers your question then please mark as ’Mark as Accepted Solution’

Hi
Nice find ducllum just ran namebench and it found the same dns server in your post was 175 percent faster than the standard ones I was using.
EDIT: I found the saved file
I can see the difference

What's the purpose of OSX Server on a Mac Mini?

What's the purpose of OSX Server on a Mac Mini? Is it to make it a Media server?
Thanks,
Jeff

Mac Mini makes a good workgroup server, classroom server, web server, DNS server, authentication server, or... Pretty much any time you want a small and quiet computer for a particular task. And for typical tasks (web and DNS and...) you can roll several together onto a single box, and can run (for instance) two as paired DNS and Open Directory servers.
Mac OS X Server works nicely on most any of the Mac Mini boxes, too, while the Mac Mini Server does have a better price here and a configuration that's more targeted at server-oriented uses. The MMS adds RAID in particular, though that could be added onto the previous servers using external storage and FireWire.
If you want a media server, then you don't necessarily need Mac OS X Server, you can do nicely with Mac OS X client and connections to whatever you want to use for media; digital TV or whatever. Front Row works OK here, and EyeTV is very nice.

What is the role of BIS server in blackberry?

What is the role of BIS server in blackberry?
i need the answer in detail?
Thanks in advance
Solved!
Go to Solution.

intisar wrote:
BIS refer to blackberry internet service ..it is just like an ISP = internet service provider...
Hello,
Actually, not quite "just like". An ISP provides primary internet connectivity to a computer/network, along with often other services (email, web, and other hostings). Most more recent BBs can, with no BIS-level service and using WiFi only, access the Internet just fine for web browsing and some other services. Further, many can, with just a generic data plan, access the same things via the Carrier Data Network. But, in neither case will any of the BB-proprietary services (e.g., BBM, email, BB Protect, etc.) function at all...all BB proprietary services require subscription to an adequate data plan from the mobile service provider.
There further are many different levels of BIS plans...there are hundreds of carriers in the world, some with dozens of different BB data plans available. Some provide email and social networking only, but no web browsing. Others provide web and internet, but no social networking. And there can be quite a large number of variations given all of the different BB proprietary services. But, in all cases, they are provided by BIS...so BIS itself is the overall umbrella of BB-proprietary services, with the different carrier data plans enabling different mixes of those various available services...it all depends on what the user subscribes to from their mobile service provider.
Hope that helps!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

What is the difference between Component,Server,Tool and Software?

HI,
What is the difference between Component,Server,Tool and Software?
SHABEER

Hi
Every individual part that constitutes in making an SAP System is called a COMPONENT.e.g DB instance, Java CI, ABAP CI etc
SERVER is the actual composition of different components of SAP.e.g. a database alongwith can instance would constitue an application server.
TOOLS are the products from different organisations (SAP or Non SAP) that can be used for different functionalities like keeping a check on jobs, monitoring of the system , e.g Tivoli
SOFTWARES are a kind of tool that help you to bring up results from the system in a user acceptable format. These are utilities that act as interfaces between the user and the system.
regards
Chen

What are the blades in a server?

I know CPU, memory and HD size. However I do not know what are the blades in a server.
Would you please explain a bit? Thanks!

Symptom
You need to decide which main memory size you should use for the blades of your BIA landscape.
Other terms
BI Accelerator, sizing, main memory, RAM, 8 GB, 16 GB, 32 GB
Reason and Prerequisites
You need to decide which main memory size you should use for the blades of your BIA landscape.
Solution
Note: Based on the sizing of your system (considering main memory, CPU and including future needs of BIA resources) you should contact your hardware partner to get a BIA landscape optimally sized to your needs.
Supported main memory sizes
           Currently, the use of blades with 8GB, 16GB or 32GB RAM is supported for BIA depending on blade and CPU architecture and depending on the hardware vendor.
Recommendations
SAP recommends to use the latest generation of blades with 16GB main memory.
                    This allows an optimal distribution of BIA indexes even for high loads due to a great amount of users. In addition to that, indexing performance profits if more blades are used in a BIA landscape.
Use of 32GB main memory size to avoid additional hardware costs
                    If the sizing for the BIA leads to a number of blades with 16GB main memory with just a few blades more than the number of blades fitting into an enclosure, then the use of blades with 32GB main memory should be preferred.
                    Example:
Assuming that your BIA sizing requires 480GB, which results in 30 blades with 16GB main memory each. Then you should order 15 blades with 32GB main memory instead, so you can avoid the usage of an additional enclosure. In addition to that, there is space for additional blades that can be used as backup blades.
Use of blades with the same main memory size
                    Heterogeneous BIA landscapes are supported in BIA 7.0 Revision 47 and later. But SAP recommends to use blades with the same main memory size for the best possible performance in scenarios with high loads due to a great amount of users.
Use of 8GB RAM main memory size
                    BIA blades with only 8GB RAM should be used only for very small BIA landscapes up to four blades. Use of those blades was introduced to fit to the needs of the SME (Small and Medium Enterprises) market.

TS1490 What are the Proxy, Port and Server settings supposed to be?

What are the Proxy, Port and Server settings supposed to be for itunes (windows 8)?
I havent been able to access itunes store for WEEKS, and i have gone through nearly everything to try and resolve it.

http://support.apple.com/kb/TS1490

TS3988 what is the iCloud incoming mail server setting?

what is the iCloud incoming mail server setting?

imap.mail.me.com - but you shoudn't need to enter this manually. If you are having problems, sign out in System Preferences>iCloud, then sign back in again and enable Mail in the checklist. Your data will disappear from your Mac when you sign out but will return when you sign back in.

What is the smtp incoming mail server for iCloud?

What is the smtp incoming mail server for iCloud?

There is no such thing as an "SMTP incoming mail server." You set up iCloud mail by checking the box marked Mail in the iCloud preference pane. You don't need to know the addresses of the servers.

What is the outgoing (SMTP) mail server for iCloud?

What is the outgoing (SMTP) mail server for icloud?

dominic23:
That's just the name/description you can give the server that appears in Mail's preferences for that account.
After selecting Edit you can put in whatever you want in the description.
advisor81:
Why do you need to know the name? If you add an iCloud account in Mail all you really need is your Apple ID and password. The servers are automatically assigned.

IMAC: What is the SMTP outgoing mail server?

IMAC: What is the SMTP outgoing mail server?

You need to get that information from your internet service provider if you are using an email address provided by them or, if you are only using iCloud, then the info can be found here:
http://support.apple.com/kb/HT4864
FWIW, in order to set up email, you need both an incoming and outgoing server address (in addition to your email address/user name and password). Those are the servers your email program uses when sending or receiving emails.

What is the best type of server can I set up on open directory?

hi.
I have a win 2000 terminal server and a xserve with mac os x server 10.4.
After some problem I have decide to reinstall mac os x server and now I want to tell you what is the best type of server can I set? (to use windows 2000 terminal server)
I refer to open direcotry service!
do you advase Standalone Server? or Master?
or do you advise a Connection to a Directory System?
I have this doubt.
thanks a lot

is it not clear?

What is the difference between SQL Server 2012 R2 & SQL Server 2014

Hi all,
I am using SQL Server from last 3 years. I started SQL Server 2008 R2. Now I am using SQL Server 2012. I want to change my development environment to SQL Server 2012 R2. But suddenly I saw that SQL Server 2014 is released. I want to know what are the
differences between SQL Server 2012 R2 & SQL Server 2014. Are both those are the same or different products?
I searched through the Internet but I didn't find any article regarding that. So could someone help me to solve this matter?
Thanks,
Regards,
Chiranthaka

differences between SQL Server 2012 R2 & SQL Server 2014.
We don't have a Version "SQL Server 2012 R2", only 2005, 2008, 2008R2, 2012 and 2014.
See MSDN What's New in SQL Server 2014
Olaf Helper
[ Blog] [ Xing] [ MVP]

What is the OMS(Oracle Management Server) ?

Hi All,
Anyone can explain me what is the OMS (Oracle Management Server)
in Oracle Enterprise Manager(OEM),may be it is the server where OEM resided on when install program I'm not sure?
Thank you,
Mcka

Enterprise manager has two ways of operating: direct attach and three-tier
In Oracle9i, the direct attach is 'stand alone console'. In 10g it is 'db console'
In Oracle9i, the three tier is using an OMS. In 10g, it is called the grid control.
Basically the OMS or Grid Control has the following configuration:
- On each database server, there is an Enterprise Manager Agent. It 'manages' all database instances on that server;
- there is a central application server (Oracle Management Server/OMS) that communicates with all agents. It tells the agent to performan actions (such as collecting operating stats) and it gets the results from those actions;
- there is a central OMS repository (schema in a database) used the the OMS, that is used to store configuration and information retrieved by the agents;
- the OMS responds to user (administrator) requests from the [9i] java console or the [10g] browser. The requested information may be retrieved from the repository or retrieved in real time directly from the instance via the agent.
The OMS can be installed on any machine. The OMS repository can be installed on any machine with a database instance.
Often the database, the OMS and the OMS repository are both installed on a single 'DBA-only machine'. (This makes sense as the information collected could have a SarbOx impact.)

TS3408 What on the Router or DNS server would cause this?

Similar Messages

Maybe you are looking for