TS3430 high processor use when running iTunes
Causes error message of high processor demand by "Apple Push". even when no activity in iTunes itself. unable to play music or open any other programs until I shut down iTunes.
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US
Similar Messages
-
High processor use and blank messages in Yosemite mail
Hello
I am noticing very high processor use from Yosemite Mail, and I am also having problems with blank messages.
Under Mavericks, I had a problem where I double click on a mail message to open it. The message would flash on the screen for a moment and then disappear. The message in my inbox would be marked as read. I could then open it again and read it normally. Over time, I tracked this down as having to do with Mail doing anything else when I requested to open the email. For instance, if I delete a message and then immediately try to open the next message, the problem would occur. If I waited 5 seconds or so, then opened the next message, the problem would not occur.
Now, under Yosemite, I find that if I open a message quickly after performing another task, the message window is blank and never fills in. I can close that message window and open it again, it may work, or it may still be blank. I have found where certain messages appear to be stuck and will open blank until I open a different message and then come back to the problem message.
I have also noticed that Mail under Yosemite appears to use very high percentages of processor time. Checking the activity monitor, Mail is third behind WindowServer and kernel_task for processor usage. And I have another question on the community about my system running hot with the fan spooling up and down constantly under Yosemite, something that almost never happened under any of the previous OS's going back to Snow Leopard.
Any idea what is going on with the Mail app in Yosemite? I was excited about Mail finally advancing in capability, but it seems to have come at a cost..... Come on Apple - Mail needs to catch up with Outlook!I also have this problem since Yosemite upgrade. Infuriating because I can't just read incoming emails anymore. It seems to be specific to one email account and doesn't necessarily cause a problem with others. When this happens, (showing the content for a second then disappearing), there is a segmentation fault reported in the error log.
For me, this is a category one critical business problem. If I can't read and reply to incoming email reliably on my computer, I will need to switch to another system or device that can.
24/10/2014 14:51:34.839 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
24/10/2014 14:51:36.262 com.apple.xpc.launchd[1]: (com.apple.WebKit.WebContent.A9C826DA-A925-4168-ADFD-46A9B4012097[6900]) Service exited due to signal: Segmentation fault: 11
Good news is that the email app does seem to work a bit quicker than before using Mavericks where it could hang for 10-20 seconds for no particular reason.
Hope this can be fixed or a workaround posted soon. -
High memory use when checking downloads folder through browser
High memory use when checking downloads folder through browser.
I have a total of 3 DDR2 Gbytes of ram. Pentium(R) Dual-Core CPU T4500 @ 2.30GHz Win 7 home pr. 64bit. Firefox 27.0 beta
I right click on a file to "open containing folder" from the drop down menu in downloads.
When the folder has been opened, explorer is trying to index the folder (which it never does completely or well after 5 minutes I close the folder and shut down the dllhost process cause laptop is blazing hot) and memory keeps increasing till no more is available.
I checked task manager and see that dllhost is the particular process that is causing the spike in memory usage even after closing the folder I right click and stop the process and memory is restored after awhile.Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
Application Errors when running iTunes in Windows 7
I am getting the following Errors in Windows when running iTunes 9. Seems to only occur when I want to view anything in the iTunes store or when listening to any music in my library that was purchased from the store.
- I have removed and reinstalled the product.
- I have been successful in replicating this issue on 2 other Windows 7 and Vista machines.
- I am running the Windows 7 Pro RTM 32bit (not the RC or Beta) and Vista Business SP2. All 3 machines worked fine before the upgrade to iTunes 9.
Log Name: Application
Source: Application Error
Date: 9/16/2009 8:41:38 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: XXXXXXXXXXXXX
Description:
Faulting application name: iTunes.exe, version: 9.0.0.70, time stamp: 0x4aa72598
Faulting module name: iTunes.dll, version: 9.0.0.70, time stamp: 0x4aa7257d
Exception code: 0xc0000005
Fault offset: 0x0083d68a
Faulting process id: 0x1028
Faulting application start time: 0x01ca36caf8f662ba
Faulting application path: C:\Program Files\iTunes\iTunes.exe
Faulting module path: C:\Program Files\iTunes\iTunes.dll
Report Id: 46722d5c-a2be-11de-8f42-00241dd1c2d2
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-09-16T12:41:38.000000000Z" />
<EventRecordID>2098</EventRecordID>
<Channel>Application</Channel>
<Computer>DTKB</Computer>
<Security />
</System>
<EventData>
<Data>iTunes.exe</Data>
<Data>9.0.0.70</Data>
<Data>4aa72598</Data>
<Data>iTunes.dll</Data>
<Data>9.0.0.70</Data>
<Data>4aa7257d</Data>
<Data>c0000005</Data>
<Data>0083d68a</Data>
<Data>1028</Data>
<Data>01ca36caf8f662ba</Data>
<Data>C:\Program Files\iTunes\iTunes.exe</Data>
<Data>C:\Program Files\iTunes\iTunes.dll</Data>
<Data>46722d5c-a2be-11de-8f42-00241dd1c2d2</Data>
</EventData>
</Event>
Log Name: Application
Source: Windows Error Reporting
Date: 9/16/2009 8:41:40 AM
Event ID: 1001
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: DTKB
Description:
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: iTunes.exe
P2: 9.0.0.70
P3: 4aa72598
P4: iTunes.dll
P5: 9.0.0.70
P6: 4aa7257d
P7: c0000005
P8: 0083d68a
P9:
P10:
Attached files:
C:\Users\KB\AppData\Local\Temp\WER5F4F.tmp.WERInternalMetadata.xml
These files may be available here:
C:\Users\KB\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrashiTunes.exe_b6d47595155ab54de22d60b9eed093f37f18d02a109365c5
Analysis symbol:
Rechecking for solution: 0
Report Id: 46722d5c-a2be-11de-8f42-00241dd1c2d2
Report Status: 1
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Error Reporting" />
<EventID Qualifiers="0">1001</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-09-16T12:41:40.000000000Z" />
<EventRecordID>2099</EventRecordID>
<Channel>Application</Channel>
<Computer>DTKB</Computer>
<Security />
</System>
<EventData>
<Data>
</Data>
<Data>0</Data>
<Data>APPCRASH</Data>
<Data>Not available</Data>
<Data>0</Data>
<Data>iTunes.exe</Data>
<Data>9.0.0.70</Data>
<Data>4aa72598</Data>
<Data>iTunes.dll</Data>
<Data>9.0.0.70</Data>
<Data>4aa7257d</Data>
<Data>c0000005</Data>
<Data>0083d68a</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
C:\Users\KB\AppData\Local\Temp\WER5F4F.tmp.WERInternalMetadata.xml</Data>
<Data>C:\Users\KB\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrashiTunes.exe_b6d47595155ab54de22d60b9eed093f37f18d02a109365c5</Data>
<Data>
</Data>
<Data>0</Data>
<Data>46722d5c-a2be-11de-8f42-00241dd1c2d2</Data>
<Data>1</Data>
</EventData>
</Event>
--------------------------------------------------------------Hummmmmm,
I had similar problem today with a laptop with Itunes / Vista
The issue occured when it was connected to the internet. Error message is related to Itunes.dll in the event viewer, and Itunes crashed.
I fixed it by checking the internet options / connection. Just make sure to have unchuck all proxy related option if you are directly connected to the internet.
Tell me if it fixed the issue.
Itunes crashed because it tried to use a proxy setting that was configured but not set to any adress (there was a blank line). -
Revision: 1433
Author: [email protected]
Date: 2008-04-28 13:13:12 -0700 (Mon, 28 Apr 2008)
Log Message:
adding 'console' security constraint to MBeanServerGateway remote object for MBean tests and ds-console, used when running on Websphere with administrative security enabled. Should call setCredentials("bob","bob1") to use this RO.
Modified Paths:
blazeds/branches/3.0.x/qa/apps/qa-regress/WEB-INF/flex/remoting-config.mods.xml
blazeds/branches/3.0.x/qa/apps/qa-regress/WEB-INF/flex/services-config.mods.xmlHi,
It seems that you were using Hyper-V Remote Management Configuration Utility from the link
http://code.msdn.microsoft.com/HVRemote, if so, you can refer to the following link.
Configure Hyper-V Remote Management in seconds
http://blogs.technet.com/jhoward/archive/2008/11/14/configure-hyper-v-remote-management-in-seconds.aspx
By the way, if you want to perform the further research about Hyper-V Remote Management Configuration Utility, it is recommend that you to get further
support in the corresponding community so that you can get the most qualified pool of respondents. Thanks for your understanding.
For your convenience, I have list the related link as followed.
Discussions for Hyper-V Remote Management Configuration Utility
http://code.msdn.microsoft.com/HVRemote/Thread/List.aspx
Best Regards,
Vincent Hu -
Read & Applied Other Threads Win Still Fatally Crashes When Running iTunes
I updated all the drivers on the system to the latest from the manufacturer websites yesterday. I then installed and ran WinDbg it is telling me RtkHDAud.sys (R+k HDAud+179e98) is the culprit causing a double fault. When I disable Realtek High Definition Audio in Device Manager my PC runs all day no hitches. I can even open iTunes and have it run in the background without trouble BUT of course I can't hear anything. Soon as I enable the audio card and run iTunes the system won't stay up for more than four minutes sometimes less. I can run Winamp without trouble BUT I DON'T WANT TO ! I have my iTunes library on an external Western Digital USB Hard Disk Drive, maybe this is the problem? Any direction I could try would be greatly appreciated. Best solution I can think of at this point is to get a squeeze box and just take the sound card out? Here is the Mini Dump from WinDbg
| | |
Microsoft (R) Windows Debugger Version 6.9.0003.113 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\WINDOWS\Minidump\Mini070808-04.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRVc:symbolshttp://msdl.microsoft.com/download/symbols
Executable search path is:
Windows XP Kernel Version 2600 (Service Pack 2) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 2600.xpspsp2gdr.070227-2254
Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055c700
Debug session time: Tue Jul 8 16:02:57.578 2008 (GMT-4)
System Uptime: 0 days 0:05:30.294
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
Unable to load image RtkHDAud.sys, Win32 error 0n2
* WARNING: Unable to verify timestamp for RtkHDAud.sys
* ERROR: Module load completed but symbols could not be loaded for RtkHDAud.sys
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 1000007F, {8, 80042000, 0, 0}
Probably caused by : RtkHDAud.sys ( RtkHDAud+179ea5 )
Followup: MachineOwner
0: kd> !analyze -v
* Bugcheck Analysis *
UNEXPECTEDKERNEL_MODE_TRAPM (1000007f)
This means a trap occurred in kernel mode, and it's a trap of a kind
that the kernel isn't allowed to have/catch (bound trap) or that
is always instant death (double fault). The first number in the
bugcheck params is the number of the trap (8 = double fault, etc)
Consult an Intel x86 family manual to learn more about what these
traps are. Here is a portion of those codes:
If kv shows a taskGate
use .tss on the part before the colon, then kv.
Else if kv shows a trapframe
use .trap on that value
Else
.trap on the appropriate frame will show where the trap was taken
(on x86, this will be the ebp that goes with the procedure KiTrap)
Endif
kb will then show the corrected stack.
Arguments:
Arg1: 00000008, EXCEPTIONDOUBLEFAULT
Arg2: 80042000
Arg3: 00000000
Arg4: 00000000
Debugging Details:
BUGCHECK_STR: 0x7f_8
CUSTOMERCRASHCOUNT: 4
DEFAULTBUCKETID: COMMONSYSTEMFAULT
PROCESS_NAME: iTunes.exe
LASTCONTROLTRANSFER: from 00000000 to ad1cfea5
STACK_TEXT:
ae1b3240 00000000 893b93c0 89231314 892316f4 RtkHDAud+0x179ea5
STACK_COMMAND: kb
FOLLOWUP_IP:
RtkHDAud+179ea5
ad1cfea5 3bce cmp ecx,esi
SYMBOLSTACKINDEX: 0
SYMBOL_NAME: RtkHDAud+179ea5
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: RtkHDAud
IMAGE_NAME: RtkHDAud.sys
DEBUGFLR_IMAGETIMESTAMP: 4333df59
FAILUREBUCKETID: 0x7f8RtkHDAud+179ea5
BUCKET_ID: 0x7f8RtkHDAud+179ea5
Followup: MachineOwner
---------I haven't a clue about this but one thing I would suggest is to try running Quicktime and playing audio,
It is possible that Quicktime is the culprit not iTunes as iTunes uses QUicktime to play music.
If it is quicktime and you really have installed the latest High Definition audio driver, then it probably worth trying a complete removal of QUicktime according to the method in this article. It is important to remove the Quicktime files from the system32 folder as recommended in the article.
http://support.apple.com/kb/HT1925
Then download and install the stand alone version of Quicktime.
http://www.apple.com/quicktime/download/win.html
It might also be worth going to your QUicktime preferences audio tab and checking safe mode to see if that makes any difference. -
Non-MAC laptop fan too loud when running iTunes
Recently I experienced very loud/fast spin fan with heated laptop whenever I run iTunes, especially if I downloading apps. And it wasn't brief. Spin vigorously throughout the downloading process. I never experienced this problem before. I am using iPhone 4S with latest iTunes on VAIO laptop. And this problem actually not permit me to install large updates (iOS), therefore, I am still using iOS 5.XX
yes, it is normal for them to run on the hot side, especially when using programs like photoshop.
-
Is there a way to affect the URL used when running a report subscription?
We are using SQL Server 2008 R2. I am finding out that when running a report subscription to extract a file in csv format, an extra blank line is created at the bottom (i.e., extra line feed), and the mysterious BOM characters also get inserted at
the beginning. Both of these "features" are causing problems with a client's import of these files. Of course, it affects multiple clients.
I have done some research and have found information on how to edit the rsconfigserver file to render CSV files using ASCII and to not use Excel formatting. This removes both "features"/problems stated above.
However, editing the server config file will affect all csv extractions on that report server. Is there a way to control the URL of a specific report subscription to include these values (so only the reports that need the fix get it)? For example,
someone gave this URL as an example of how to add parameters including encoding in the URL. http://MyReportServer/ReportServer?%2fReport+Folder%2fReportName&rs:Command=Render&rs:Format=CSV&rc:Encoding=ASCII
Is there a way to have the report subscription run the report using a URL like this so it extracts it without the BOM characters? I was thinking a data driven subscription would allow me to set the values like this, but these parameters are only pertinent
AFTER the report is run and only needed for the final rendering. Not sure how to do this. Maybe it's not possible. If it's not, that's fine. I just need to write a proposal to our DBA's to talk them into making a couple edits to the server config
file.
Has anyone ever worked around this before in SSRS?
Thank you!!
DanaHi DanaSSRS,
According to your description, you want to have some report exported into CSV file with ASCII encoding when running a subscription. Right?
In Reporting Services, when we run the subscription, it will call the Render Extension as we configured in rsreportserver.config file, we can't set the Render format with ASCII Encoding on subscription level. As you said, the Render Extension we configured
in the rsreportserver.config will apply to all reports. In this scenario, you only want that extension apply to specific reports. For your requirement, we suggest you add a custom Render Extension in configure file. You just need to copy the CSV Extension
and add a <OverrideNames/> to override a new name. Then set the <Encoding> in <Configure>. And you can select this custom Extension when creating the subscription. This might be the most effective workaround.
Reference:
Customizing Rendering Extension Parameters in RSReportServer.Config
CSV Device Information Settings
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
In an AppleScript, can compression level high be used when saving an image as a JPEG?
When using AppleScript to save a copy of an image file as a JPEG on OS X 10.6 Snow Leopard, can "compression level high" be used in the code, or can only "compression" be used?
The part of the AppleScript dictionary for Image Events indicates that "compression level high", "compression level low", and "compression level medium" can be used, but when I type any of those three in the code and try to save the AppleScript file, the below error is displayed, and the word "level" is highlighted in the AppleScript Editor:
Syntax Error
Expected end of line, etc. but found identifier.
-Johnyou need to open the image in image events before you can save it as a different format. you have to make a distinction between the image file (a file system object) and the image itself (the data that is the digital representation of the visual image). what you want to do is open the image file in image events to extract the image data, then resave the image data in the new format. looks something like this (changing just the last bit of your script):
set theImage to choose file with prompt "Please select an image file:" of type "public.image"
-- other stuff...
tell application "Image Events"
set theImageData to open theImage
save theImageData in newPathToSave as JPEG with compression level high with icon
end tell -
"System extension cannot be used" when updating iTunes
Every time I update iTunes through the standard Software Update, I get multiple messages towards the end of the installation saying:
*System extension cannot be used*
The system extension "/System/Library/Extensions/IOFireWireWDHID.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.
This only happens when updating iTunes. Any ideas? Thank you in advance!Hello MaxGraphics,
You both may want to read this article before proceeding. It does give you an idea about kext files and how to handle them.
http://www.ihackintosh.com/2009/02/what-is-kextwhere-is-kext-how-to-install-kext /
Hope this helps. -
Error message when running iTunes
Every time i run iTunes I get a message saying "The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing".
I've updated and re-installed a couple of times but still get the message. Any help would be appreciated. I run XP pro on a PCHave a look at this article in the Apple Knowledge Base and let us know if it brings you any combination of joy and/or satisfaction.
-
For the last year or so I've noticed that a great deal of RAM has been marked as in use when I open Activity Monitor. I just upgraded to Mavericks hoping that the new memory compression feature would help alleviate this problem. However, logging in for the first time I saw that 3.8 GB of my 4GB was marked as in use. Now that I have Activity Monitor and Safari running it shows 3.96 as in use. I also run Dropbox and Adobe Creative Cloud, but those only take 60MB and 36MB respectively as I write this. Scrolling through the active processes I see a ton of things running. Does anyone have an idea on why so much RAM would be used up and what I can do to alleviate the problem? Thanks.
Since installing Mavericks I have never seen my RAM go below 3.5. Before it would max out at about 2-2.5 with the same programs open. So idk too much about Mavericks actually being less intensive on RAM or not.
-
right, everytime i run itunes, a box appears which says "windows is configuring itunes" it seems like it's installing it everytime i run it. after the configuration, itunes does run, but going through this proess everytime i want to run itunes is annoying, any help?
Windows VistaA quick thing to try.
Go to the iTunes folder in the Program Files folder, right click on iTunes.exe and select:
Send to to>>Desktop(create short cut)
Does it work any better if you use that short cut? -
Safest browser to use when running bootcamp
Which browser would you recommend using when you are running windows in bootcamp?
Thank you for your quick reply Loner T, I realized my real question was really "Is Safari safer on Mac than IE?" Thanks again!
-
Setting up an external boot drive to only use when running Logic Pro.
Since Logic Pro must be installed on the boot drive and it takes a lot of space I am considering an external boot drive. I would only use this drive when running Logic Pro and at other times it would not be connected. It is possible to set up a Firewire 800 drive in this manner and choose which drive to boot from whenever it is connected? I’m not interested in running Windows on this computer, but I would like the option to connect a second Firewire drive to occasionally backup the Logic boot drive.
Am I better off doing a clean install of the OS on this external drive?If you hold down [option] at start up it will show all possible Boot volumes and allow you to select the one you want.
Yes, I'd do a clean OSX install and then put Logic Pro on it.
Maybe you are looking for
-
Issues syncing with OneNote 2013 and skydrive
Hi Support I had a syncing issue on one of my OneNote notebooks. I used the MS help and they suggested that I confirm that the notebook is on the Skydrive web access, which it is, and then close the notebook. I have done that. Now when i try and ope
-
hi experts, Batch Input for Creation and Change of condition records for condition types with different access sequences in sales and distribution. what did it mean explaine me briefly thanks in advance.
-
Re: Recommended Setup for compiling NLMs?
David Howe wrote: > Is there a TID or guide to setting up a development environment? In a > former place of employ, I used to use borland and the base tech sdk, but > that appears to no longer be available and I suddenly find myself with a > need to
-
Hello, I've been experiencing a lot of problems lately regarding Firefox and font rendering. I keep seeing the problem displayed in this image: http://img61.imageshack.us/img61/5748/firefoxfontap1.png It appears to happen whenever a font changes on a
-
Some one know How to Save in MP4 on AE CC 2014? Before, I konw How to do it, but now it change.