TS3474 Blank Screen, despite connecting to computer.

I've used this ipod nano 3 times, and I've had it less than a month.  No damage.  The screen will not turn on.  It connects to my laptop and shows it to be working fine, BUT I can't use it. the screen just stays black despite all the sites suggestions.

I've not noticed this with mine, but then I don't use openzone that much.  Do you get the same regardless of whether you're using Opera or IE?
Cheers
Alun
"Can a leopard change it's shorts?" - T Prattchet

Similar Messages

  • Ipad 3rd gen shows blank screen when connecting to projector via HDMI AV adapter.  I have an ipad 2 that works perfectly.  Projector is a Dukane ImagePro 8106HA.  Only difference I see is that the ipad 3 owner has not updated to IOS 6. Any thoughts?

    Ipad 3rd gen shows blank screen when connecting to projector via HDMI AV adapter.  I have an ipad 2 that works perfectly.  Projector is a Dukane ImagePro 8106HA.  Only difference I see is that the ipad 3 owner has not updated to IOS 6. Any thoughts?

    Ipad 3rd gen shows blank screen when connecting to projector via HDMI AV adapter.  I have an ipad 2 that works perfectly.  Projector is a Dukane ImagePro 8106HA.  Only difference I see is that the ipad 3 owner has not updated to IOS 6. Any thoughts?

  • Black/blank Screen when connected remotely

    Zenworks 10.3.3
    I've only come across one other post on this forum concerning this issue. Sometimes when we're remotely connecting to an XP workstation all that appears is a black/blank screen. The management and remote machines are MS Win XP Pro SP3, pretty well up to date with security patches and all. On the remote computer, the screen saver at logon is disabled, desktop screen saver is disabled, the NIC is allowed to bring the device out of standby, standby is enabled and hibernation is disabled. If you send it the reboot command, more often then not, you can catch it back at the login screen and go about your business.
    Might Zen 11sp1 fix this?

    Is anyone at the Device to see what state it is in when this happens?
    On 10/28/2011 12:46 PM, elphantasmo wrote:
    >
    > Zenworks 10.3.3
    >
    > I've only come across one other post on this forum concerning this
    > issue. Sometimes when we're remotely connecting to an XP workstation
    > all that appears is a black/blank screen. The management and remote
    > machines are MS Win XP Pro SP3, pretty well up to date with security
    > patches and all. On the remote computer, the screen saver at logon is
    > -disabled-, desktop screen saver is -disabled-, the NIC is -allowed- to
    > bring the device out of standby, standby is -enabled- and hibernation is
    > -disabled-. If you send it the reboot command, more often then not, you
    > can catch it back at the login screen and go about your business.
    >
    > Might Zen 11sp1 fix this?
    >
    >
    Craig Wilson - MCNE, MCSE, CCNA
    Novell Knowledge Partner
    Novell does not officially monitor these forums.
    Suggestions/Opinions/Statements made by me are solely my own.
    These thoughts may not be shared by either Novell or any rational human.

  • Flashing screen when connected to computer

    My ipod classic recently started acting up.
    The screen is black and non-responsive.
    When I connect it to the computer with the usb cable it flashes on and off with the apple logo screen.
    The computer does not even recognize that anything is plugged in though, and therefore it does not show up under itunes so i cannot restore or reinstall it.
    The only time the ipod works is when it is plugged into my Griffin iTrip.
    It works fine in the car and says that the ipod is fully charged but the screen just goes blank as soon as i unplug it again.
    I've tried resetting the ipod while it was plugged into the iTrip with no success.
    is there anything i can do to save it?
    Thanks in advance for any help.

    Anyone have any suggestions on this problem? The exact same problem occurred to my wife's 80 GB classic yesterday. The grey apple screen flashes when hooked up to my iMac via a USB cable. iTunes does not recognize it. It works in the car or house though with our Griffin power accessories. Unplug it from the USB cord though and the screen goes black. Battery indicator says it is fully charged.
    Any help would be appreciated!

  • IPhone stuck on "Connect to iTunes" screen. Connect to computer, "USB device not recognised". Can't reset. Suggestions?

    Above says it all. Frustrated, no one seems to have an answer. Anyone know of anything that could get me closer to fixing it?
    Happened when iPhone 4 was updated to iOS 5. Problem was Kaspersky was on - I know this because I have had trouble when updating my iPhone in the past when it was on. Unable to get anywhere in terms of restoring because it's stuck on Connect to iTunes screen, computer won't recognise it and reset won't work.
    Any help would be appreciated. Thanks in advance.

    I had this problem before and fixed it. Its happened to me again very recently so its not uncommon. I had to completely uninstall ITunes and most importantly uninstall Apple Mobile Device Support which can all be found in the uninstall programs in the control panel. once you have done that, re install the most up to date iTunes (don't worry about having to find another Apple Mobile Device Support software as the most up to date version of that gets installed with iTunes). Once that is done take out the USB cable make sure the iPhone is off or blank ad iTunes is not open. Then simply plug in the USB and iPhone you don't have to hold any buttons and the phone should light up and you get a message about the apple mobile device support software being installed then itunes opens asking if you want to restore this iPhone. if this doesn't work don't worry take out the phone and try a different USB socket making sure iTunes isnt open for some reason it doesnt like it open.
    Hope that helps im only saying whats helped for me so sorry if it doesnt for you

  • Ipod nano 3rd generation , blank screen when attached to computer, ipod will not reset??? any help please?

    Hi there,
    I have just purchased a 2nd hand ipod nano 3rd gen.  When I received it the screen was in working order but everything from the previous owner had been wiped.  I attatched to computer and all seemed well, attached it then to itunes and at first it seemed to go ok, however screen then went blank and froze.
    I am now unable to restart ipod.  ipos is still being recognised by itunes so I tried to restart ipod whielst attatched to itunes to to try and put into play mode but still no joy, no apple appearing on screen.
    Ipod was fully charged.
    Any ideas please as I am not the most technical of people and its slowly driving me mad
    Kind Regards
    Lindsey

    How did you try and reset the iPod? To reset the iPod, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together at the same time long enough for the Apple logo to appear.  Don't be afraid to try this procedure more than once.
    B-rock

  • HELP! iPhone 3G stuck on apple logo and occasionally switching to yellow screen, cant connect to computer!

    Hello everybody,
    A few days ago my iPhone 3G 8GB was working fine, i believe the battery went dead and as i charged it up again it was stuck on the apple logo.  I plugged it into the computer and no response, i tried rebooting the iPhone and putting it in DFU mode, but none of them worked.  Occasionally the iPhone switches from being stuck in the apple logo to a yellow screen, about every 10 minutes.  PLEASE HELP!!!!!

    First of all, make sure that it is fully charged (charge for at least 30 minutes). Second, hold down the home and the sleep/wake button simultaneously for 10 - 20 seconds until the apple logo appears. If nothing works, try to backup the phone (if possible) and put the phone into recovery mode. To get that, open itunes and connect the phone to the computer. Press and hold the Home button and the Sleep/Wake button at the same time. As soon as the screen goes black, release the Sleep/Wake button. Continue holding the home button until you iTunes pops up a message telling you that it has detected an iPhone in recovery mode. You can now restore the iPhone using iTunes.

  • Blank screen after display driver update Satellite Pro P200

    I installed the latest ATI Mobility Radeon HD2600 display driver (8.432, from the Toshiba site via Tempo) on my Satellite Pro P200 yesterday. On rebooting everything looks fine as far as the Windows Vista Business "Please wait ..." screen, but instead of displaying the login page I get a blank screen (with a mouse cursor that moves around as normal). All I can do at this point is power off, and I've run out of ideas on how to get any further.
    Things I've tried:
    # booting into safe mode, low-resolution video or last known good configuration all result in the same blank screen.
    # connecting to the system using remote desktop (to disable the driver) isn't possible because the system hasn't loaded the network drivers yet.
    # I can't revert to a restore point because Vista can't find any (I made a manual one after installing windows updates on a couple of days ago).
    I can run a command prompt from the system recovery options and would prefer to use that to disable the driver +if+ I knew how before resorting to the more drastic options.
    A web search (http://www.google.co.uk/search?q=ati+catalyst+vista+blank+screen&hl=en&sa= N) reveals that this has happened on a wide range of laptops with
    previous releases of the driver, but none of the links I've looked at give a solution that's available to me.

    No joy with an external screen so I bit the bullet and reinstalled from the product recovery disk. I tried expert mode to retain the data partition but that failed twice, so I had to restore it from the previous day's backup after doing a full reinstall. Two consolations, though.
    # It allowed me to increase the size of the data partition.
    # The display driver update worked fine on the fresh install.
    Needless to say I've since found [http://support.microsoft.com/kb/927525] which describes how you can disable a problem device driver (atikmdag in my case) from the system recovery command prompt :-(
    Hopefully the instructions in there will help anybody who gets caught with similar problems.

  • Blank screen Envy 15 despite reset and external monitor

    HP Envy 15 J112TX notebook has worked well for a week. Windows 8. The screen is black but can hear the fan going. Hard reset didn't help. External monitor didn't connect - it said to check the video connection. The cord was connected HDMI to DVI. Did another reset. Now i have switched it on and off a few times so that when i switch it on after a minute it will make asmall pop sound and then the fan stops making noise and it won't switch off despite holding dow the power button for a minute. 
    I disabled the nvidia graphics card a few days ago to try and save on power as it also has an intel graphics card. But it worked fine for a couple of days after i did that. 

    Hi @salsa7 ,
    I understand that you cannot get your HP Envy 15-j112tx Notebook PC will not boot up for you. I will try my best to help you with this issue.
    Here is a document for Blank Screen LED Error Codes that may help us determine what is causing this issue.
    I hope this helps, please let me know how it goes.
    Thank you and have a great day!
    I worked on behalf of HP.

  • Just downloaded 10.5.  It gives me a blank screen for the itunes store.  No error message.  Internet connection fine.  Have checked firewall.  Any ideas?

    I have just downloaded 10.5.  it gives me a blank screen for the itunes store.  No error message.  Internet connection fine and I have checked my firewall settings.  Any ideas?  Or is the store blocked because of ios 5 release today?

    I've had the exact same issue since late last night since I downloaded 10.5
    I'm also having problems backing up my iPhone, which I suspect is due to the same issue.
    I've tried all recommended solutions on forums and Apple support (deleting backups, restarting phone/computer, disabling/uninstalling third party security software, testing port connectivity) and none of them work.
    I will try japiohelp's solution and see if that does anything.

  • Hi, i am having a problem in my ipad 2 , it is not showing main screen just showing a black blank screen in which downloading icon is only shwn which is continously and when i connect to itunes via windows 7 it showing this error (0xE8000065) can any one

    hi, i am having a problem in my ipad 2 , it is not showing main screen just showing a black blank screen in which downloading icon is only shwn which is continously and when i connect to itunes via windows 7 it showing this error (0xE8000065) can any one

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • HT201263 my ipad still will not start. When connected to wall charger it shows the connect to itunes. When connected to computer it is a black screen and slightly blinks

    my ipad still will not start. When connected to wall charger it shows the connect to itunes. When connected to computer it is a black screen and slightly blinks

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
     Cheers, Tom

  • Hi my iPad mini was working fine but now is just a blank screen will not respond to any buttons or connect to I tunes

    My iPad mini was working fine then screen black and will not. Respond to any buttons or connect to iTunes

    Plug it into the wall charger an wait for at least 30 minutes.
    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • Doesnt boot Black/Blank screen when a cd-rom is connected - MSI x58 Platinum

    i7 920
    MSI x58 Platinum *latest bios, updated it after experiencing this issue*
    Corsair 3x2gb TR3X6G1600C8
    OCZ OCZ700MXSP 700W SLI/CrossFire Active PFC
    geforce 280gtx
    Windows 7 64bit
    This is a build working perfectly for over a year.. well one day my mom turned off the computer when I got home it wouldn't boot I disconnected/reseated everything and was able to figure out if I didn't have my dvd drive hooked up it will boot perfectly fine. I should note that the drive shows up fine in the bios and that with a pata hard drive it will load windows fine.
    I've tried 2 pata drives and 1 sata drive all working/tested in other machines .. and it stops at the same exact spot every time right after the bios and before the Windows logo would normally pop up it will just sit on a black/blank screen forever. I have never heard of a issue like this where it wasnt the ide channel going bad or the drive itself but since a harddrive on the ide channel works i assume its good.
    I didnt know if i should post this in the windows 7 64bit forum or this but im leaning towards motherboard as the issue because it still freezes at same exact spot even with no hard drives connected , so I couldnt boot anything from the dvd-drive. I'm also thinking its the mobo because i had it repaired a year ago, see my old thread here
    https://forum-en.msi.com/index.php?topic=127312.msg958264#msg958264
    Any idea's or suggestion please let me know.

    A PSU acting up can cause some strange things to happen. Have you confirmed that the DVD drive is working correctly?
    Quote
    I couldnt boot anything from the dvd-drive.
    Is the DVD drive enabled in the boot sequence?

  • I connected an external monitor to my MacBook Pro, but it doesn't open any programs. It Just sits there with a blank screen.  How do I get it to open programs and act like a monitor?

    I connected an external monitor to my MacBook Pro, but it doesn't open any programs. It Just sits there with a blank screen.  How do I get it to open programs and act like a monitor?

    Dear Jean:
    It sounds like you are trying to get your external monitor to act as the primary viewing screen. For example it would have your Doc, Icons, Etc. In order to make the external monitor the primary screen you have to:
    Open System Preferences.
    Choose the Displays Icon
    There will be several tabs to choose from pick Arrangement
    Drag the toolbar to desired display
    Let me know if this helps at all!
    Lance

Maybe you are looking for