TS3474 bt mistake i disconnected my i-pod nano 6th generation without ejecting it. Now it wont turn on, what can i do?

By mistake I disconnected my I-pod nano 6th Generation without ejecting it. What can I do?

from http://www.apple.com/support/ipodnano/assistant/itunes/
Press the Sleep/Wake button and the Volume Down button for at least 8 seconds until the Apple logo appears. You may need to repeat this step.

Similar Messages

  • I see a podcast in my computer when i look into the driver of my ipod. But the problem are that i can;t find it in my i pod nano 6th generation. What to do?

    I can see that on the harddisk when i look into my  i pod nano see some podcast. When i look in my I pod i can't find them. What to do?

    Great Troubleshooting on your own so far!. (If you got 2 PC and 2 iPod would be much easier, some of the people in this community has more than 2 of each.)
    Hope you did not connect it to a USB Hub, the sync cable must be plug in directly to a USB2 port at the back of the Desktop Computer.
    If you have a spare Notebook, with iTunes, connect it to the Notebook, to check if the iPod is working or hung.
    Can you iPod run and play songs, when disconnected from the PC? (Sorry, for just asking the obvious)
    Anyway, just hard reset your iPod, so that we can start from scratch
    1. if your iPod is hung, reset it by pressing Menu and Center button for at least 10 secs till the Apple logo, comes on. (this won't delete your songs in the iPod, if they are not corrupted))
    2. Connect it back to your Notebook or Desktop.
    if your iPod screen is dead, try charging the battery by connecting it to another computer. if it doesn't connect to successfully to another computer, it may need servicing.
    Good luck!

  • HT1335 My computer crashed and we installed a new hard drive.  How do I sync my I pod nano 6th generation?  Will I lose everything I have on the Ipod ?

    My computer crashed and we installed a new hard drive.  How do I reinstall I tunes and sync my Ipod Nano 6th generation?  Will
    I lose everything I have on it?

    If you don't have the prior computer backup files, you may want to look at this to get your information from the phone:
    http://www.wideanglesoftware.com/touchcopy/index.php

  • I pod nano 6th generation volume buttons no longer work

    I got a quote from apple and they want 80$ to fix an ipod with a crappily built button.  This is my second ipod nano 6th gen within the past year, my last one had the same button problem but it was with the power button.  I don't abuse them.
    How do i go about getting a new 6th gen without paying 80$ for a design flaw.

    Hello,
    Have you should made sure your permissions are repaired? If your permissions are wrong, then you will likely have trouble.
    I found that it found several audio related permissions needing correction on my system after the update. Since repairing permissions, everything has been fine.
    So, go into "Disk Utility" in the Applications --> Utilities folder and repair your permissions.
    Start by selecting your hard drive on the left window of Disk Utility. Then, go down and click on the "Repair Permissions" button. Once it's completed, then exit Disk Utility.
    Then, go ahead and restart the computer and see how it works.
    I hope this helps.
    Let us know if you have other questions.
    P.S., if you'd like, go ahead and click the "Helpful" or "Solved" buttons on any of the posts / replies above if you feel they were helpful or adequately answered your question.

  • My i pod nano first generation doesn't work with windows 8

    My i pod nano first generation doesn't work with windows 8

    Howdy yvesmd,
    Thanks for using the Apple Support Communities.
    If your iPod nano is not being recognized in iTunes on your Windows computer, then I'd like you to please follow the directions in the link below.
    Apple - Support - iPod - iPod nano Troubleshooting
    Cheers,
    Alex H.

  • TS3218 My iPod Nano 6th generation fell one time and it kept working with a small crack in the screen.But after a while it just gave out and does not turn on.I try to charge it and all it does is blink the apple icon on and off.When disconnected nothing h

    My iPod Nano 6th generation fell one time and it kept working with a small crack in the screen.But after a while it just gave out and does not turn on.I try to charge it and all it does is blink the apple icon on and off.When disconnected nothing happens.

    I am having the identical trouble as described above with my month old Macbook Air. I tried everything with the ditto results. Please help anyone!
    Mine is a Macbook Air 13', 128GB, 1.86GHz with 4 GB RAM.

  • HT201210 I disconnected my iPhone in the middle of an iTunes update. Now it wont run properly what do I do?

    I disconnected my iPhone in the middle of an iTunes update. Now it wont run properly what do I do?  I was working online and I recieved a pop up from iTunes stating that there was an harwared update for my iPhone. I had it plugged up for a while , long enoung for me to watch a tv show have dinner and come back.  I thought the update was complete and came back to the computer and unplugged it. The next morning I saw a picture of aUSB cord  and the iTunes icon. I have no use of my phone and cannot get access to emails, internet contacts..nothing . Help !

    Well it should NEVER be unplugged when doing something.
    It actually had not installed the software at that stage, it had been copied over to the iPhone, it was being checked and then it would be installed.
    You need to connect your iPhone to the computer at home and hope that you can install the software again and then restore your backup.
    If you install iTunes at work you may be able to Restore the software but you will most likely lose the content on your iPhone as you do not have a backup to restore on that computer, or all your media / apps.

  • HT1665 How do I connect my i-Pod Nano 7th generation to my audio dock player since it has a different docking device?

    I bought the i-pod nano 7th generation.  But it has a new connecting cable.  How do I connect it to my audio dock player which has the wide pin dock?

    you will need to buy a lightning to 30 pin adapter
    http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter

  • TS1405 i pod nano 5 generation backlight not working

    Dear Friends,
    my i pod nano 5 generation backlight is not working.Suddenly it stops after recharged.All 5 Rs tried but failed to problem.
    I would highly appriciate for yr. help.
    REGARDS

    If the 5 R's of troubleshooting failed to resolve the issue, then it's likely hardware related, meaning you'll need to have your iPod serviced or replaced.
    B-rock

  • Can the i pod Nano 7th Generation be connected to a Bose docking system?

    Can the i pod Nano 7th Generation be connected to a Bose docking system? Or is there some other docking system that can be used? I need to play my i-pod Nano over a loudspeaker system of some kind.

    In order to connect the 7G Nano with older accessories, you'll need the Lightning to 30-pin adapter.
    http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter
    As for a clip, you'll have to wait and see if any third party manufacturer's release a case/cover/sleeve that includes a clip.
    B-rock

  • How can I change of page with double click on my I-pod nano 7th generation?

    How can I change of page with the double click feature on my I pod nano 7th generation?

    I can't really understand what you are asking. Can you elaborate?

  • My i-pod nano 3rd generation dislpay has lines and black blobs what do i do?, my i-pod nano 3rd generation dislpay has lines and black blobs what do i do?

    my i-pod nano 3rd generation dislpay has lines and black blobs what do i do?, my i-pod nano 3rd generation dislpay has lines and black blobs what do i do?

    Work through the usual 5 R's of troubleshooting to rule out the possibilty of a software glitch/issue or data corruption.
    http://www.apple.com/support/ipod/five_rs/
    If none of them take care of it, it's more than likely a hardware problem with the Nano's LCD display in which case you'll need to either take or send your iPod in for repair either through Apple or a third party service.
    B-rock

  • My i pod nano 6th gen keeps powing down 1 minute into a song. It is fully charged

    My I-pod nano 6th generatio has a full charge but keeps powering down 1 minute into a song.

    Your nano is pausing playback when the screen goes dark (Either when it goes dark on its own or when you click the sleep/wake button). The reason for this is that it is not detecting your headset. You may be able to hear music, but the headset jack is not inserted enough for the nano to detect that it is there (or something is blocking the connection). Here are your three options:
    Insert the headset jack harder. Most folks find that this solves their problem. If you can see ANY of the silver of the plug when it is inserted, it is NOT fully inserted. You should feel and hear a click" when it is fully inserted.
    Clean out the crud in the headset port. If you have tried #1 and it just won't insert all the way, it is likely that you have crud in your headset jack. Shine a light in there. The entire inside of the jack is white, so if it looks dark down at the bottom, there is probably crud down there. You can try blowing it out or using canned air. Just understand that shoving anything else in there to clean it out will be taking your warranty into your own hands! However, I have cleaned mine out using whatever was handy and small enough to fit in there and so far so good. Your results may vary!
    Take it to the Apple store. If you have really tried with 1 and 2 and it is still happening, then there might just be something up with your headset port or your headset jack. If it is the headset jack, you can look closely at that and be pretty sure if that is the problem. Try another headset to make sure. If you have worked all the way through to this point and it is still happening, it is time to take it to the Apple store.
    i

  • USB cable for i-pod nano 3rd generation

    I recently bought a new i-pod 3rd gen and used my USB cable for the i-pod classic 80 GB which seemed to be working fine.But after when I tried to use the original USB cable for the i-pod nano it wouldn't connect to the i-pod.
    Does anyone know whether it is OK to use the cable for the i-pod classic and why the original cable does not fit with my i-pod nano?

    can somebody help me?

  • My i pod touch crashed and is displaying a blank yellow screen and won't turn off what can i do?

    My I pod crashed and now displays a blank yellow screen i can't switch it off what can I do.

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Maybe you are looking for