TS3474 My Ipod will not play the next song, it continously plays the same song unless I manually change it

My iPod will not play the next song, it continously plays the same song unless I manually change it.

It sounds like the repeat setting has been enabled. See page 21 of your iPod's User Guide for instructions on turning it off.
http://manuals.info.apple.com/en_US/iPod_nano_6thgen_User_Guide.pdf
B-rock

Similar Messages

  • My ipod will not advance to next song, how can I fix this?

    My ipod nano will not advance to next song, neither in regular play or shuffle.  Any ideas on how to get it to work?

    Lilly.Love wrote:
    Hi, I'm new to this and for some reason my images are not appearing to full scale on adobe premiere cs6. This is really annoying as I am trying to make a stop motion video but I can't see what I'm doing. Please reply soon, this is an important project. Thanks
    Your sequence settings and clip settings are not matching. To make them match, right click on a clip and choose New Sequence from Clip and a new sequence will be created based on your clip settings.

  • TS3474 My ipod will not start even after holding down the Sleep/Wake button and the Volume Down button for at least eight seconds.  What is my next step?

    I have a sixth generation ipod 16gb nano.  It will not turn on.  I have tried hoding down the power button with the down volumn button without results.
    Any other suggestions?

    i have the same problem...my ipod is 4th generation?uggghhhhh

  • IPod will not cut off. Yes, I've held the play button.

    I can't cut my iPod off. I've held the off button for minutes, still no result.

    First off, are you sure that your "hold switch is off? (located on the top of your iPod). "On" is orange, and "off" is grey-colored.
    Making sure that your hold switch is off, have you tried resetting your iPod? This may take a few attempts -> Resetting your iPod
    Have you also tried:
    --Leaving your iPod to charge on the stand for an extra hour.
    --Putting your iPod into Diagnostics Mode (reset the iPod, and as soon as the screen dims, begin to press the Select (center) and "<<" buttons to enter Diagnostic Mode). Run the KeyTest to see if your Play/pause button is even properly responding.
    If these attempts do not work, I'd next suggest restoring your iPod. To learn more, read here -> Restoring your iPod to Factory Settings
    -Kylene

  • My daughters ipod will not turn off and it is frozen on the apple icon screen. Tried to update software, didn't work. Tried to restore, didn't work. Anybody know what to do next?

    My daughters ipod touch will not turn off and is frozen on the Apple icon screen. Tried to update software, didn't work. Tried to restore, didn't work. Does anybody know what else to try?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • HT1459 My computer will not recognize my iPod, the iPod will not turn on either so i cannot find the serial number, what should I do?

    The reboot screen has been up for 12 staight hours, and counting. I tried to delete all the data because an app of mine was no longer working.

    Start here.
    There have been some problems accessing pages on the Apple web site.  If the hyperlink doesn't work, try again.

  • Brand New Ipod will not charge. Too low to turn on. Same icon for 2 days

    I got this baby for christmas and recently it ran completely out of battery and I have had it connected to the computer for 2 days now and still no charge, Itunes does not even recognize it. If you got any help I guess just post on here or email me at [email protected]...
    Thanks,
    Doug
    Dell   Windows 2000  

    I have this problem too. My first generation Nano was revived by a Genius at the local Apple store when he connected it to an AC adapter.
    Unfortunately, it seems that the Nano requires a small charge just to get it to the place where it can recharge using USB.
    The solution: don't let the battery discharge completely, and/or buy an AC charger for the Nano.
    I guess I should also change the settings on the iPod so it goes to sleep after a couple of hours. (I often listen to audio books while going to sleep, so the iPod plays all night, and uses all the battery power.)
    Over the life of the iPod, the cost of an AC adapter is far less than the cost of buying disposable batteries, but it irks me that an adapter is necessary when the rechargeable battery runs out.

  • HT1727 the computer my itunes were on completely crashed. i rebuilt my files on a new computer but my 4th generation ipod will not sync with the new library. what can i do to have the two devices work together again?

    the computer my itunes were on completely crashed, nothing was recoverable. i bought a new computer but my ipod would not sync with it. i rebuilt my itunes library from scratch but my ipod will not sync with it.how do i get the two devices to sync?

    Follow the steps given here…
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • My ipod will not even turn on when I plug it in to my computer.

    My IPOD will not turn on, even when when plugged into the computer. It will not sync or anything.

    Hard Reset.
    - Hold down the Home Button (Circle button with White Square in it) and the Sleep/Wake button
    - Wait for the 'Slide to Unlock' screen pops up
    - Test to see if the issue is resolved.

  • IPod will not turn off after being used as an external HD in Windows

    I have disabled the option to have Itunes open when I connect my Ipod and I turned off the iTunesHelper in msconfig. This allows me to use my Ipod as an external HD without interference by iTunes. I have found that since upgrading to Ipod firmware 1.1.1, after I disconnect my Ipod using the Safely Remove hardware option in Windows XP SP2 my iPod will not turn off. I just turn on the lock, and let sleep mode set in after 2 minutes.
    This only occurs if I connect the iPod as an external HD and does not occur when I connect the iPod with iTunes open to sync my music library. The problem started with firmware 1.1.1. Is anyone also having this issue, and if so, is there a known solution?

    If you are not past the 2 weeks return period you can just return it.. for sure the TC is not ideal when you want something to store files.. the fundamental issue is lack of backup. The TC cannot back itself up. Nor can Time Machine in the computer backup network drives.
    To mount the TC disk in finder.
    Use Go, Connect to server. in the top menu.
    Type in AFP://TCname.local or TCIPaddress. (where TCname.local is the correct network name of the TC.. ie not its name as typed in, if it includes spaces and illegal characters like apostrophe. You need to find the actual network name from network utility netstat scan or better still use proper naming on the TC.
    Local is the default domain and helps.
    If the TC is in router mode the IP is static and is better used than the name.
    AFP://10.0.1.1 for example with default IP is far superior way to identify a network resource.
    The disk password will be requested. Add it to your keychain.
    It is better to load files to a DMG or sparsebundle.. See Pondini for info.
    Q3 http://pondini.org/TM/Time_Capsule.html

  • IPod will not play any music. Seems like it is in "Pause" mode.  No sound from either the head phones or internal speaker.  I have 418 songs stored and none will play.

    iPod will not play any music. Seems like it is in “Pause” mode.  No sound from either the head phones or internal speaker.  I have 418 songs stored and none will play. I have tried resetting, turning on and off the iPod, etc. but to no avail.

    Try restoring from backup. Next would be a restore to factory defaults/new iPod.

  • My IPod will not automatically advance to the next song.

    IPod will not automatically advance to the next song. I have updated and restored. The Shuffle has the two arrows crossing which I believe means it should be advancing. Any suggestions?

    While playing any song on your iPod, tap the artwork to bring up the scrubber bar and additional controls. On the left hand side is a option for repeat (the right hand side features the Shuffle feature). You want to make sure this icon is white (meaning it is set to Off). If it isn't, tap it either one or two times to change its current setting.
    Any luck there?
    B-rock

  • After i have downloaded an album from iCloud to my new macbook pro. Itunes will only play one song at a time. If i hit the fast forward or back button will not do anything. I have to use the mouse to hit the next tidal in the album then hit play for it

    after i have downloaded an album from iCloud to my new macbook pro. Itunes will only play one song at a time. If i hit the fast forward or back button will not do anything. I have to use the mouse to hit the next tidal in the album then hit play for it to play the next song. Or put it in the UP NEXT.

    First, make sure these items have checkmarks next to their names in iTunes. Continuous playback only works on checked items. Itunes will play all checked items in a list whether or not they're from the same album.
    If you see that nothing in your library is checked and you want to check everything, hold down Ctrl while checking an item. This checks everything.
    Next, fixing the "1 of 1" problem is easily. Select all the tracks that make up the book/album. Let's say there are 15. Press Ctrl-I. Doublecheck that the album box is filled in with the name of the book, and if not, type it there. Enter "15" in the box for the total number of tracks. Click OK. Now all the items should be "1 of 15," "2 of 15," and so on.

  • On an iPod Nano 2G, the iPod will not show in iTunes

    Using an iPod Nano 2 G, when I plug it into a Mac, the iPod will not show in iTunes. The iPod will charge, but will not sync. This happens across multiple Mac's, so the issue seems to be the Nano, not the computer(s). The iPod will actually show for about 2 seconds in the left sidebar, then it disappears. Any suggestions about how to either fix this, or maybe how to restore the iPod's software. The iPod otherwise seems to be working correctly, i.e. will play music, etc. we have tried switching ports, cables and computers, same results. 

    Did you do everything here:
    iOS: Device not recognized in iTunes for Windows
    Including
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Do other USB devices work on the computer/USB port??

  • Ipod will not display track and artist name when i play a song

    ipod will not display track and artist name when i play a song... i cant see the the volume display to adjust it eiether. Everyting shows up in the menus just not on the now playing screen.... any suggestions?

    Try restoring your iPod. Just be aware that restoring will erase the hard drive, reload the software and put it back to default settings. Once the restore is complete follow the on screen instructions and it should connect to iTunes and give you a prompt to automatically update your library onto the fresh installation. If you want to update manually or using selected playlists choose no and it will default to manual mode and you can choose whatever setting you like: Restoring iPod to factory settings with iTunes 7

Maybe you are looking for

  • ERROR 9006 can not update iPhone 4

    I have a iPhone 4 on iOS 5.1 and when i try updating or even restoring to iOS 5.1.1 i get an ERROR 9006 about 40 - 60mb into the download i have tried maybe 4-6 times and cannot get it to work any one else have this problem and able to over-come it.

  • No inbound delivery/TO created for goods receipt into a Lean WM Storage Loc

    Ladies and Gentlemen: We are using SAP 46C with Support pack 45. We have quite a few storage locations that are Lean WM managed. The Storage locations are not HU Managed. However everytime run a MB1C or MIGO 501, SAP is receiving the materials direct

  • RFC APPLICAITON ERROR

    Hi All, I am debugging a scenario which inculde RFC as recevier and SOAP as sender communicaiton channel. Though at design time my Message mapping and Interface Mapping test was successfull and getting RFC_ADAPTER APLLICATION ERROR in moni at Request

  • Why reservation don't show decimal same as process order?

    When i create process order 001 its require Mat.A 0.95 ZET, the problem is when see reservation at MB26 its whow order 001 require 1 ZET, Why it's don't show 0.95 as process order require? Information: Base unit of Mat.A = SET, Unit of issue of Mat.A

  • How close the sales Order

    Hi Guru, Greeting from Sanjeev My client want to enter the old inquries/Quatation & Sales order in new system. after making the sales order we cannot make delivery as this SO are already invoiced!! we cannot create the Invoice.I want to close this SO