TS3474 My nano will not power on when fully charged, screen remains black.

Bought early 2012, no idea what generation it is. When connected to the stereo, the screen illuminates and nano works with stereo controls. When I try to take the nano for a run, when holding the power button down the screen remains black and no amount of touching the screen will produce an image or any sound. Any ideas about troubleshooting the black screen when powering up un-connected?

Hello gatormother,
Thank you for using Apple Support Communities.
For more information, take a look at:
iPod nano (7th generation): Hardware troubleshooting
http://support.apple.com/kb/TS4433
Will not turn on or screen remains dark
Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
If iPod does not turn on after ten minutes, try resetting it while it is still connected to power. Reset the iPod by holding down the Sleep/Wake button and the Home button for at least six seconds or until you see the Apple logo appear.
If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
If the screen remains dark and will not turn on, then your iPod may need service.
Have a nice day,
Mario

Similar Messages

  • HT201401 My IPhone4 is in a coma.  Will not reboot even when fully charged and using reboot techniques listed in forum.  Any suggestions?  I have some pics and contacts I need.  I did not backup!

    I would appreciate any suggestions you might have.  I did not back up my IPhone4 - stupid on my part.  It just quit the other day.  It is in a coma.  I have tried recharging and rebooting to no avail.  My greatest concern are several pictures that I cannot replace.  Is their an internal sim card that perhaps could be recovered.  I need to return the phone to Verizon as they mailed me a replacement due to the fact that no one at the local Verizon store could awaken the phone.  Please help if you have ANY suggestions!  Of course, i will backup everything in the future - just hoping for a chance with these pics and contacts.

    I ceaned the fan, the computer shuts down when I hit ENTER after logging in (again, i have a password set)
    I did manage to do a a start-up repair w/out the comp shutting down half way through. This was in the detailed diagnosis and repair:
    Root Cause Found:
    Boot critical file d:\windows/system32\kdcom.dll is corrupt.
    Repair action: File Repair
    Result: Failed. Error Code= 0x490
    Time Taken:5460ms
    Repair Action: system restore
    result: Completed successfully. Error Code= 0x0.
    I also get a message::
    Windows cannot repair this computer automatically.
    If you have recently attached a device to this computer, such as a camera or portable music player, remove it and restart your computer. If you continue to see this message, contact your system administrator or computer manufacturer for assistance.
    **any of this help you??**
    I appreciate your help!!

  • HP Palion dv7 Notebook PC will not power up when power button is pressed.

    My HP Pavilion dv7 Notebook PC will not  power on when the power button is pressed. I have removed the battery, unplugged the AC adapter and pressed the power button for 15+ seconds then plugged in the AC adapter and pressed the power button for 15+ seconds. Then I release the power button and then press the power button again and the Notebook will power up and operate normally. I can reinstall the battery once it has powered up. What is causing this problem and how do I remedy the problem?

    Hello Griff83147,
    Unfortunately there could be a number of different things that caused that issue from drivers, software, possibly hardware. I am glad you got it up and running but there isn’t a clear picture of what actually caused. If a technician got the chance to work on it then they could at least narrow it down.
    Sorry I could not answer your question, but this is one of those questions that can have multiple answers.
    If you have any further questions don’t hesitate to ask.
    Thanks  
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • Laptop will not power on when power button is pressed

    I have a Pavilion m6
    model: m6-1045dx
    Laptop will not power on when I press the power button. It is fully charged. The only light that will come on is the light indicating that it is fully charged. I have tried removing the  battery and then putting it back in but that did not work. I use this laptop for college and it is time to go back to school. Please help!

    Try a hard reset, works sometimes.Disconnect all external devices first.
    1-remove power cord and battery
    2-press power button for 30 seconds
    3-reinstall only power cord for first startup.
    4-try power on
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • My ipod nano will not power on, unless connected to my pc?

    my ipod nano will not power on, unless connected to a usb port , on my pc?

    Hi ..
    Follow the troubleshooting steps here >  Apple - Support - iPod nano - iTunes Troubleshooting Assistant

  • HT1414 Hi there, my I pad series 2 has a black screen, it will not power up when attached to a laptop, and only shows black screen and Apple icon when attached to a mains power source. Any thoughts please? Allan

    Hi there my Ipad 2 has a black screen, will not power up and will only have an Apple icon when plugged into a mains power source. It will not power up when connected to a laptop. Any thoughts please?
    Regards,
    Allan

    Hi there,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    -Griff W. 

  • My fone will not power on , it was charging last nite , i tried to reset it but no luck

    my fone will not power on , it was charged last nite , i tried to reset it but no luck

    Did you already try to connect in recovery mode?
    iOS: Recovery mode
    Also check this article:
    iOS: Not responding or does not turn on

  • My ipod 3rd generation nano will not power up and itunes does not recognize it, what can I do?

    My 3rd generation will not power up. I've tried to reset it by holding the menu and select buttons at the same time but nothing happens. My itunes will not recognize it either when i connect it to the usb port. Does anyone have any suggestions? Thanks.

    See:
    iOS: Device not recognized in iTunes for Windows

  • My iPod touch will not power on.; The charger is plugged in but the screen is blank.

    My iPod Touch will not power on. charger is plugged in but the screen is blank.

    Hello Dennisom,
    The troubleshooting detailed below can help get your iPod Touch to charge.
    If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
    Inspect the connector at the bottom of the phone:
    Make sure that there are no bent pins in the connector.
    Make sure that the connector is free from debris.
    If there are bent pins or debris, please contact Apple Support.
    Otherwise, continue troubleshooting.
    Make sure that the outlet you're using works.
    Make sure that the Apple USB cable and Apple USB power adapter work.
    Plug the device in to power and let it charge until your device turns on. This could take between 10 and 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
    If the device still exhibits an issue, try turning your device off and then on again while connected to power.
    If the issue persists, please contact Apple Support.
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Cheers,
    Allen

  • Help plz, I pad2 will not power on have it charging all day and nite and nothing

    please help me my ipad2 will not power up its been plugged up for 2 days now and nothing what shud i do?

    Have you tried a soft-reset  to see if that gets it to boot up ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo will hopefully appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Satellite P100 will not power up or has blank screen

    So I have this laptop that has failed me about 4 months ago. Will not power on anymore. I can press the start button and it sounds like its working but there is nothing on the screen. I can hear the fan every now and again and then a beep after about 1 min after "start up" but screen looks dead. Nothing appears on screen at all.
    I've tried the powering on with and without the battery.
    My laptop use to get very hot and freeze as far as I remember.
    I've replaced my Toshiba with other notebook but if my Satellite is not gonna work again is there a way I can get files off there still?
    Thanks for your help.

    Hi
    > I've replaced my Toshiba with other notebook but if my Satellite is not gonna work again is there a way I can get files off there still?
    You need the data and files from the internal HDD?
    You could access the data connecting the P100 HDD as an external USB HDD to the other computer.
    You could remove the HDD from the P100 and could insert it into a external USB caddy
    I think the HDD supports the SATA interface so you have to look for SATA USB caddies
    Regarding the P100 issue;
    Well it seems to be a hardware problem We can speculate only about the kind of malfunction but for me it looks like a serious issue
    The best is to get in contact with an notebook technician and to check the single parts
    Good luck

  • Iphone4 logo show for 10 seconds, off for 10 seconds, will not come on, is fully charged

    phone4 logo show for 10 seconds, off for 10 seconds, will not come on, is fully charged

    Did you try to set it up as new device without using any backup afterwards?
    Use iTunes to restore your iOS device to factory settings - Apple Support
    If the phone works after that, you backup data contained corrupt files. If still problems, contact Apple Support to get it serviced, this might be hardware related after all.
    iPhone - Contact Support - Apple Support

  • Ipod Nano will not power on, but works when plugged in. Any fix?

    Hello, My wife's Ipod Nano I got her for her birthday a while back will not turn on.  She thought the battery was dead and hasn't used it in some time.  Now when she or I plug it in it comes on, you can see her music and connect to our Itunes but it will not turn on from battery.
    It is NOT the hold/lock button on top I have tried everything.
    I tried holding down the menu button and select button, still nothing.  What can I do?

    If the iPod functions normally while plugged into an external power source of some sort (either USB port on your PC or Mac OR while plugged into a wall adapter), but doesn't when running on battery power, it's likely that the iPod's battery is shot.
    You can have Apple or a third party repair center replace the battery for a flat fee. Otherwise, it's time to start saving for a new iPod or replacement.
    B-rock

  • My iphone will not power on - when plugged in the battery will display, but it does not charge

    My iphone ran out of battery a few days ago, and now it will not charge back up. Its been plugged in for over a day, when the home button is pressed it displays a battery with 3 small red bars. I was able to get it into recovery mode and restore factory settings - but this did not solve the problem! it is still not turning on. I have tried changing chargers etc. already and i believe it is a problem with the phone. please help!

    Could be a battery problem. You'll have to visit an Authorized Apple Service Provider to Apple Store to get it checked for hardware issues.
    iPhone - Contact Support - Apple Support

  • IPod nano will not connect and the Apple logo screen stays up

    Hello,
    Earlier today I shut my iPod nano off normally (by holding the pause/play button). Later, when I went to listen to it again, I found it wouldn't turn on. I tried resetting it, and I got the low-battery signal, so I plugged it in. The thing is, the Apple logo screen is illuminated and I cannot get it off that screen, and normally when I plug my iPod in, iTunes comes up. iTunes didn't come up and it says there is nothing plugged in. What should I do?
      Windows XP  

    Okay.
    If the Apple logo is not going away and the iPod won't get to the main menu (when not connected to the computer), try what those links suggest.
    If your iPod does not get to the main menu or say Do Not Disconnect, it will not be recognized by the computer. You have to get the iPod to say Do Not Disconnect, show the main menu, or just get past the Apple logo before it will be recognized. The above links will help you get the iPod get past the Apple logo.
    The iPod cannot be recognized by iTunes or the computer if it is stuck at the Apple logo.
    Finally, don't connect the iPod while the iPod preferences in iTunes are open.
    btabz

Maybe you are looking for

  • Post upgrade R12.1.1 to R12.1.3 invlid objects

    Dear Experts, Kindly note that i have performed the upgrade from R12.1.1 to R12.1.3 . I have noted the below invalid objects. APPS     MSC_CL_PULL     PACKAGE BODY     INVALID APPS     RLM_MANAGE_DEMAND_SV     PACKAGE BODY     INVALID APPS     RLM_RD

  • Howto diff between bug and unknown?

    I am living in Europe, not in the USA. Your products are sold in the World. With my latest iMovie, I still cannot find the right 720p or 1080i (PAL) match. Apple, are you supporting Europe as well or do you think that the world is ending between 2 oc

  • Editing a document not created in Lifecycle Designer

    I am trying to amend a PDF document in LiveCycle Designer 8. When I open the PDF I get a message saying it was not created in LiveCycle Designer but a copy of the original will be created. I have got as far as amending the text but the copy that is c

  • Restore default Smart Playlist

    I accidently deleted the default "Recently Added" Smart Playlist. I was just attempting to clear that playlist, not delete the folder. Oops, I use it often. I have been trying to restore it by creating a new Smart Playlist with the same title, but it

  • Call library with struct as parameter - several problems

    Hi everyone, I'm trying to send a MIDI sysex message to a midi device through winmm.dll using MidiOutLongMsg. I have trouble figuring out how to pass the parameters right. I need to call three functions (midiOutPrepareHeader, midiOutLongMsg, midiOutU