TS3536 I still dont see a file sharing tab and I want to use it for my mixer app, I made some ringtones and thats the only way I can use it
I cant see the filing sharing on itunes and I was wanting to get some ringtones and thats the only way I can use them, where is the filing sharing thing at? even when I sync my phone I cant seee it
File sharing appears at the bottom of the device's apps tab i.e. the tab that you use to select which apps to sync to the device. Connect the iPhone to your computer, select it on the left-hand side of iTunes, and scroll to the bottom of the Apps tab on the right-hand side.
File sharing : http://support.apple.com/kb/ht4094
Similar Messages
-
After reading and resetting everything with Keyboard I still get blank white screen on 2nd? page of boot. The only way I can boot to Mavericks is unplug power cord, push and hold power button while plugging power cord in. Fans run at full speed, machine boots then runs normal except the dvdrw will not . The mid 2011 IMAC had the same problem with LION. I changed hard drives, formatted, and installed a clean install of latest os x mavericks. Any help would be greatly appreciated.
EtreCheck version: 1.9.15 (52)
Report generated August 30, 2014 at 6:56:41 PM EDT
Hardware Information: ?
iMac (21.5-inch, Mid 2011) (Verified)
iMac - model: iMac12,1
1 2.5 GHz Intel Core i5 CPU: 4 cores
4 GB RAM
Video Information: ?
AMD Radeon HD 6750M - VRAM: 512 MB
iMac 1920 x 1080
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:16:53
Disk Information: ?
ST3120026AS disk0 : (120.03 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Untitled (disk0s2) / [Startup]: 119.17 GB (87.12 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
CHICONY USB NetVista Full Width Keyboard
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Anywhere
Kernel Extensions: ?
[loaded] com.nvidia.CUDA (1.1.0) Support
[loaded] com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
[loaded] com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
Startup Items: ?
CUDA: Path: /System/Library/StartupItems/CUDA
FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[running] com.arcsoft.eservutil.plist Support
[running] com.bjango.istatmenusdaemon.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[running] com.sophos.autoupdate.plist Support
[running] com.sophos.configuration.plist Support
[running] com.sophos.intercheck.plist Support
[running] com.sophos.notification.plist Support
[running] com.sophos.scan.plist Support
[running] com.sophos.sxld.plist Support
[running] com.sophos.webd.plist Support
Launch Agents: ?
[running] com.arcsoft.esinter.plist Support
[running] com.bjango.istatmenusagent.plist Support
[loaded] com.nvidia.CUDASoftwareUpdate.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.sophos.uiserver.plist Support
User Login Items: ?
Macs Fan Control
Firefox
Internet Plug-ins: ?
FlashPlayer-10.6: Version: 14.0.0.176 - SDK 10.6 Support
Flash Player: Version: 14.0.0.176 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: Java 7 Update 67 Check version
Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
CUDA Preferences Support
Fan Control Support
Flash Player Support
Java Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
1% WindowServer
1% fontd
0% firefox
0% SystemUIServer
0% SophosWebIntelligence
Top Processes by Memory: ?
229 MB firefox
156 MB SophosScanD
152 MB InterCheck
131 MB com.apple.IconServicesAgent
115 MB SophosAntiVirus
Virtual Memory Information: ?
424 MB Free RAM
1.53 GB Active RAM
1.37 GB Inactive RAM
699 MB Wired RAM
1.26 GB Page-ins
0 B Page-outsI'd start by getting rid of the following software responsible for these extensions.
Kernel Extensions: ?
[loaded] com.nvidia.CUDA (1.1.0) Support
[loaded] com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
[loaded] com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
Startup Items: ?
CUDA: Path: /System/Library/StartupItems/CUDA
FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Use the uninstaller provided with the Sophos software. You can uninstall CUDA via the preference pane. Be sure you remove the com.nvidia.CUDA extension which is located in the /System/Library/Extensions/ folder. Not sure if Fan Control has an uninstaller so you will have to do it manually:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
1. AppZapper
2. AppDelete
3. Automaton
4. Hazel
5. AppCleaner
6. CleanApp
7. iTrash
8. Amnesia
9. Uninstaller
10. Spring Cleaning
For more information visit The XLab FAQs and read the FAQ on removing software.
Be sure to remove your two Login Items. Finally do this:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
The only way I can open a new tab in Firefox is by right-clicking a bookmarked site and selecting "Open in a New Tab." I can't click on the New Tab + or CTR+T or open via File. WHY don't the other means work?
The Ask Toolbar is causing that in the Firefox 3.6.13+ versions. Uninstall that extension.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons -
Sometimes I cannot bring up iTunes when I click on the icon. Have even gone to the START Menu and clicked on that icon but it still wont work. The only way I can fix it.....sometimes.....is if I reboot. Please help me 8-) Thanks
I understand that Firefox is no longer working on your Windows Tablet. The development of Metro did stop and has been discontinued. However what version were you on before this started to happen?
-
I have an employee who has an issue when on calls. When he is in a call with someone, he can hear another call beeping in but no name shows up. The only way he can see who called is if they leave a voicemail. He says the phone is up to date with software. Wondering if anyone can help me figure out what is going on.
Morning katesnazzy,
Thanks for using Apple Support Communities.
There are different methods for enabling and using the following features, depending on your wireless carrier's network technology
For more information on this, take a look at this article:
iPhone: Understanding phone features
http://support.apple.com/kb/HT4515
Best of luck,
Mario -
This is a silly question, but I cannot fix it! The icons that appear on my photos after I edit them, have gone away. The only way I can see them is in the Grid view.
How can I get the icons back on the thumbnail photos of the full gallery that is loaded? TIA =)You have likely dragged the size of the filmstrip thumbnails to a small size that prevents Lightroom from displaying the badges. Using your mouse, mouse over the top line of the filmstrip and then drag it supports to increase the size.
-
A month or two ago my ipod nano fell and now i can not use the buttons on my ipod! Please help! I love this ipod nad I dont want to get a new one!
First thing to try is a reboot of your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
This fixes many little annoyances like this. Hope it works for you. -
I am running version 3.6.15
That can a problem with the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
See:
* [[Troubleshooting extensions and themes]] -
When I attempt to sign out of Hot Mail by clicking "Sign Out," I get the "Sign In" instruction as I always have, however, the green Firefox navigation button remains on bright green (not going to gray) and my MSN home page will not close automatically as usual. I click on the green arrow and I get an instruction to "Sign Out" again. I click on that and get the "Sign In" again but the arrow stays green. I can repeat this countless times and never get signed out and always remaining on the MSN home page. The only way I can close is to go to File and click on Close Window and then my homepage will close and go back to desktop. I've been using Firefox for a couple of years now (IE prior to that for ten years) and have never had this problem. After using "Close Window" I go back onto my home page, from the desktop, and the navigation button is grayed out normally until I sign in again and we start the cycle over again. Have I been hacked?
== This happened ==
Every time Firefox opened
== Approximately a month ago.I was doing a side-by-side comparison of the new and old server (we backed up the server before the reformat) and I can see that, evidently, CR XI was installed. We have the directory C:\Program Files\Common Files\Business Objects\3.0 and all the versions match what is located in the project's bin directory. Does this confirm that I did have XI installed and licensed at one time?
If I purchase a more recent version, couldn't I update the reports to use the newer version? I have all the source code.
Thanks for your help, it is a nice sanity check for me after hours of reading forums and documentation.
Also, just a shot in the dark, but I'm assuming it wouldn't do me any good to simply restore the aforementioned folder to my C drive? Would that work if I registered all the dll's?
Edited by: Eric Hollering on Dec 2, 2009 6:40 PM
To be clear, I do have VS 2003 & 2005, and I have the source code. I just have never used Crystal Reports in any of my .NET apps because the need wasn't there, so recompiling is not out of the question.
Edited by: Eric Hollering on Dec 2, 2009 6:49 PM
Also, I looked at the CrystalDecisions.CrystalReports.Engine.dll that was in the C:\Program Files\Common Files\Business Objects\3.0\Managed folder and when I right-click and view the properties, then the Version tab, in addition to the 11.0.9500.2 version number, there is a property called Product Version that has the value .NET. Does that mean that this dll was bundled with Visual Studio?
I also found this directory on the old server...does this tell you anything?
C:\Program Files\Business Objects\BusinessObjects Enterprise 11
I did see that you can still buy XI from CDW. I have a call into them currently to check with Business Objects for any registrations from my company.
Edited by: Eric Hollering on Dec 2, 2009 8:27 PM -
I use Outlook for my email, and about 90% of the time when I want to attach a pdf or jpg file it failes and andout 50% of the time when I'm trying to send a standered text email I also failes and the email masage crashs. The only way I can get my Outlook to work is if I switch to Firefox. I would rater not have to swich all my bookmarks over to Firefox.
Has any one eals had this problem?That's an Outlook issue. You'll probably get better responses posting on the Office for Mac forums.
-
i am tryin to access old macbookpro harddisk on macbook air,when i connect it via usb i see the folders,but i dont see any files e.g. my saved photos,movies,docs are not there,its shows that 220gb is used,but no data is visible...all folder are empty.......can someone pls adv how to access data?
i am tryin to access old macbookpro harddisk on macbook air,when i connect it via usb i see the folders,but i dont see any files e.g. my saved photos,movies,docs are not there,its shows that 220gb is used,but no data is visible...all folder are empty.......can someone pls adv how to access data?
-
Hi,
I am having a problem with iTunes and my iPad today: I have a couple of apps that allow sharing of content, such as iMockups, Pages, VLC, etc.
I wanted to add a video to VLC by using the file sharing tab and adding the video either by the "add..." button or just dragging it into the screen (like I did before), but nothing happened. In fact, nothing at all is showing on the right hand side for ANY app!
So I disconnected the iPad and looked at the apps, and all three apps I tested (Pages, VLC and iMockups) have their respective files still there, so they were not lost or anything.
So I went and reconnected the iPad, and for the time the iPad synchs with iTunes I can see all files! But once the synch completes I cannot?!
Has anyone come across this before? Is there a fix for that?
Thanks for your time
AlexThe issue has been resolved, turned out to be a bad backup of the iPad. Restoring it to a different backup fixed it.
-
I downloaded a free game last night and since then under the shared tab in my finder it says "hp002655a82ea0" and the only info I can get about it is that it is a pc. Then under console I see several "stealth mode connection" attempts ti TCP 192.168.1.107:##### from 74.125.225.82.443. The second number has jumped around and sometimes starts with 192. I dont really know what those numbers are but how do I stop them from attempting to get through my firewall and kick them out of my shared tab??? I encrypted all my files and made sure all sharing is turned off so I don't know what they are doing. Thank you very much.
Mac OS X versions 10.6.7 and later have built-in detection of known Mac malware in downloaded files. The recognition database is automatically updated once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders. In most cases, there’s no benefit from any other automated protection against malware.
The most effective defense against malware is your own intelligence. All known Mac malware takes the form of trojans that can only operate if the victim is duped into running them. If you're smarter than the malware attacker thinks you are, you won't be duped. That means, primarily, that you never install software from an untrustworthy source. How do you know a source is untrustworthy?
Any website that prompts you to install software, such as a “codec” or “plug-in,” that comes from that same site, or an unknown site, is untrustworthy.
A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim.
“Cracked” versions of commercial software downloaded from a bittorrent are likely to be infected.
Software with a corporate brand, such as Adobe Flash, must be downloaded directly from the developer’s website. No intermediary is acceptable.
Follow these guidelines, and you’ll be as safe from malware as you can reasonably be.
Never install any commercial "anti-virus" products for the Mac, as they're all counter-productive. If you need to be able to detect Windows malware in your files, use ClamXav -- nothing else. -
hi ive upgraded my itouch to ios 6.1.3 but it keeps crashing ounce i put my passcode in is there a way i can fix this? one of my friends mentioed downgrading it but the only way isnt supported by apple so i dont feel safe with it so plzz help me.
it has worked fine no problems till i updated it i tried restoring itwith my old backup but it doesnt move the ios back so it just keeps on craching when i try to unlock itTry:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Downgrading the iOS is not supported by Apple -
LR has stopped working several times when I use the Import command (button and from File menu) - Windows gives the options of waiting or closing LR. I have waited for 30 mnutes but nothing happens. This pre and post-dates the latest LR upgrade. I'm using Windows8 and have only had problems in recent days. The only solution I can see is to restart my PC. What's happening - any ideas?
Dorin:
I have uploaded the catalog file and the photo included in that catalog (a Canon 20D .CR2 file) to RapidShare at:
http://rapidshare.com/files/139240757/_MG_7731.CR2.html
http://rapidshare.com/files/139240759/LR_Test_Catalog.lrcat.html
I am assuming that the associated "LR_Test_Catalog Previews.lrdata" folder isn't required too and will be recreated for you?
John:
Yes, I imported some .CR2 files taken from home to the office and imported them into an existing catalog there. And yes, they're shown okay. Plus other 2006 files (from the same camera, I usually import into both) are okay too. There are some .XMP files in some 2006 folders, but not many. I will take the catalogue (sorry, got caught up in the Yank spelling) from home to the office on Monday and try importing that, hadn't thought of that. The photo's won't be in the same folder structure though and not all will be there.
Apologies for not answering the other question, I am a person who came from the Pixmantec RawShooter background and would have still been using that program then. The .RWSettings folders are still in the folder structure. I am pretty careful with my .CR2 files and try not to use any programs that would directly edit them. I have backups on DVD, but I haven't tried them. I also have another copy of some 2006 files on another HDD and have tried importing them tonight into the new catalog with no change in behaviour.
I will also try setting the camera date to 2006, take some new pics and see what happens.
Apologies, too, about the apostrophes, my dear Mum would be most embarressed at me. Can't edit them now, history has passed by!
Thanks for your assistance.
Simon...
Maybe you are looking for
-
Error while generating reports
Hi, I have taken Customer Fname,Customer ID and salary (as a measure) to generate a report in compound layout.I am encountering the following error: Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSEr
-
I would like to set Family sharing credit card set to none
Why are users of Family Sharing option required to leave a Credit Card number. As with an individual itune account you can set to none.
-
My iphoto will not load!
-
Is it possible to print a label after each LPN during a PO receipt using MSCA?
We have the buiness flow setup however the labels only print after all LPNs are received. We would like each label to print when we go to Next Item. We are runing R12.1.3
-
My Adobe Photoshop Elements 12 only prints bluish pictures
I had a wonderful, effective consultant with my Adobe 12 problem in the morning Friday 21.2 He then said he needed 1-2 hours to finish his work with me case number 1852 036 72, and promised to call me back. That never happened, and he was unwilling