TS3623 Apple TV movie streaming problem

Hi Folks
When playing movies from my computer to Television via apple tv they play for 2-4 minutes the disappear leaving me to have to switch itunes off then back on again but after another 2-4 minutes the same thing happens. Any Ideas?? I've rebooted, reloaded and followed all the Apple stores suggestions but nothings working.

Welcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.
You might also try moving the Apple TV away from other electrical equipment.

Similar Messages

  • IPhone4 to Apple TV movie streaming problem

    Movies recorded using my iPhone stream no problem to Apple TV via Airplay but movies that have been downloaded seperately and loaded onto my iPhone and are stored in my iPod part of the iPhone do not have the Airplay icon to allow streaming. Any ideas anyone? If my computer is on the same movies stream ok from there to the Apple TV but doesn't seem happy doing it for the one's saved on my phone.
    Many thanks

    I am having the same problem, what are we doing wrong or is that yet another feature that is not supported by Apple

  • Apple TV movie streaming from hard drive stops

    I'm streaming movies from my Mac mini to Apple TV.  (Have done this with no problem for >1 year). For the last two days the movies will stop in mid play and not start again.  The only remedy is to quit iTunes on the Mac and restart. This will happen multiple times in a movies.  I have not been able to correlate the timing to anything.    Any ideas?

    Welcome to the Apple Community.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

  • Apple TV Movie Streaming Errors

    My 40 GB ATV has been very tempermental when I try to stream from my iMac. Sometimes it works great, sometimes it kinda works where my movies need to rebuffer frequently, and more often than not I get a "No content found error".
    Oddly enough there have been instances where I get a "No content found error" when streaming, I try streaming another movie which will work and I got back to my original movie and it works.
    There has also been another instance where a movie is streaming just fine, it rebuffers and gets stuck. I then go back to menu and reselect the movie and I get a "No content found error".
    Here is some info on my set up environment. I have a iMac connected wirelessly with 802.11n enabled with full reception, ATV with full reception, and an Airport Extreme. My iMac is running iTunes 7.4.2 and my library is loaded on an external hard drive via Firewire. (Seagate Free Agent 750 GB) My full length movies (1-2 hours) are encoded either by Handbrake or iSquint and are between 500MB - 1.5 GB in size.
    Here are some other quirky things I noticed on my ATV. When I play movies that are resident on ATV, they sometimes take about 15 - 30 seconds to load. When they do it goes through that rebuffer sequence as if it were streaming. Should it start playng instantly since it is on the local hard drive? I sometimes even get a "No content found error".
    What's really odd, is that things seemed to go haywire when I moved the ATV from my theater room to my master bedroom. When I had it in my theater room, the thing hummed. Worked flawlessly most of the time.
    But here are some things to note about the environment between the home theater scenario and master bedroom scenario:
    Master Bedroom Scenario: outlined above.
    Home Theater Scenario: iMac had full reception, ATV had 3/4 reception. At that time I had a Western Digitial My Book 500 GB drive connected to my Airport Extreme via USB which hosted my iTunes Library. Oddly enough, at some point iTunes automatically changed my iTunes Library folder from the Western Digitial My Book 500 GB to my iMac internal hard drive.
    Since things were a little quirky after I move the ATV to my master bedroom I did a Factory Restore hoping to wipe the slate clean. This helped a little, but the ATV is not running as smoothly as it did out of the box.
    Could this be perhaps that I am running my iTunes library on an external Hard Drive? Please note, that my iMac and Hard Drive go into sleep mode when inactive after a certain amount of time.
    Any thoughts anyone? Similar encounters? Thanks!

    Welcome to the Apple Community.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

  • I have a movie streaming problem with my 2nd generation Airport Extreme

    I am using a second generation airport extreme and I am having trouble streaming movies/tv.  I did not have a problem using a new airport extreme.
    Any ideas?

    This was solved by buying an Apple Airport Base Station.

  • Weak bass with Apple TV movie streaming.

    I recently hooked my apple tv (3) to my surround receiver via optical cable. The Dolby Digital sounds great overall, but my subwoofer is definetly not getting the same umph as, say, a blu ray or even DVD movie. Is there any way to fix this?

    pretty sure the digital stream is passed through the appletv unaltered so the stream is 100% as it was added to the itunes store (which of cause could be weak compared to your wishes)
    if it's media you made yourself then maybe some wrong settings was set for the encoding

  • TS3623 Apple tv movie playback issues.

    My apple tv will at random intervals playing any movie rented or not, stop playing and go back to the main screen. Even when the movie is completely buffered. I have also ensured the latest updates have been applied. I have a 16mb connection with 802.11N so the bandwidth isn't the issue. I have friends with less then half who do not experience any issues.  HELP!!!

    The movie is not stored on Apple TV, it will be flushed from the system when you turn off or access other content. Go to settings - itunes - check for rentals. If it does not appear initially, try logging out of account and signing back in.

  • ITunes Match on Apple TV 2 streaming problem?

    With  iOS 6 music from iCloud is streaming perfectly via iPhone 4 and iPad 2 but on my Apple TV 2 it is still unreliable. Has anyone else found this?  I'm wondering if the ATV could be affected by proximity to amps etc, or whether I should assign static ip addresses to all my devices.  Any suggestions very welcome.  It seems mad that plugging my iPhone into the stereo works better than the ATV!

    I recommend first you check software update on the Apple TV to be certain you are up to date.  If you are up to date, I recommend you unplug power to the Apple TV, leave it unplugged for a few minutes, then plug it back in.  If that does not help, re-set the Apple TV.  The instructions for doing that are at this link.  If the link does not load, just reload it and it should show up.
    http://support.apple.com/kb/HT3180

  • How I resolved my Apple TV download speed problems

    I have been experiencing download speed problems with my Apple TV2 for a while. The performance was so bad that I couldn't buy or rent movies from Apple TV, because it would take hours to even start the download. I wasn't sure if the problem was with my ISP (Comcast), the modem, or the wireless router.
    I just logged in to my wireless router (Cisco Linksys E300) and changed the following two settings:
    Network Mode = Wireless-N Only
    Channel Width = 20 Mhz Only
    After restarting my Apple TV2, movie streaming is now perfect. It took less than one minute to start the streaming of a recently purchased movie.
    I recalled reading some time ago that a Network Mode which allows switching between B, G and N wireless modes can cause problems with streaming. Perhaps each time switching occurs, the Apple TV has to renegotiate with the iTunes Store. I'm not sure that the "Channel Width" setting is necessary or relevant, but since I'm happily streaming again, I don't really care.
    I hope that this helps others resolve this problem.

    If you have home sharing enabled on the Apple TV and an IOS running on the same network you can use the remote app. Otherwise, you will need to purchase a new remote.

  • Apple tv mirroring not working with vidieo/movie streaming from online

    apple tv wont let me play movies streaming through my ipad with safari
    Also i cant seem to download any of my music and movies off my itunes to my ipad, it comes up  Unableto Download song "Name of Song" could not be downloaded at this time.
    Please help

    still have apple tv problem, the second problem with downloading music i have attached my ipad to my computer and is now syncing music. hopefully this will fix the problem

  • Apple TV streaming problems with itunes

    Apple TV streaming problems. Since recent last update to AppleTV when I try to streams movie or tv show from iTunes sometimes it is fine sometimes it takes hours (Hd or Sd). No problem with netflix. Wifi is not super strong in location but this was not a problem at all before update. Any suggestions?
    Paul

    ok.
    this is not a solution to your problem, but you didn't need to do that just to remove it from appletv. you could have simply unticked the item in your library and that would have made it not available to appletv. you could also have amended your sync options. you don't need to delete something from your library just to remove it from appletv.
    however back to your problem. it sounds like the appletv is not syncing the changes to your library. you should restart your appletv and see if that forces the change.

  • Streaming Apple TV movies from external Hard Drives

    I have my entire movie collection converted to mp4's and on external hard drives plugged into an Airport Extreme. I use my Macbook Pro as my main computer for my itunes media.
    I just got the new Apple TV2 and I am having issues with the movies streaming. Basically what is happening is when I play the movie it stops and spools for a minute or two, plays for a few more minutes and stops and spools again.
    Both My Macbook Pro and Apple TV are using WiFi do you suppose if I hard wired my Apple TV into my Airport it would help matters?
    I wish that the Apple TV would load the entire movie first then play it rather than stream!
    If anyone can ease my pain I would be grateful!!!
    Thanks!

    This problem is just one of many problem's that I have experienced and some of those seem to re-occur "especially" after updates from Apple. Can someone tell me why Apple would allow these issues to continually manifest. It makes me feel like im Beta testing "poorly written code" which is the reason I moved away from Microsoft Windows not to mention its taken the fun out of using my ATV2. I've been on the phone with TS and they have run me through the different options. The failing is the lack of control settings within the ATV and TS in the end just offered me "Polite Lip Service". Their is no "Automated" reconnection for movies on "drop out" and Screensaver is an issue, nor is there any "Buffer Setting" to control poor streaming issues. My solution after days of pulling my hair out was to load movies into TC, reference file on HD, Hd Wire "everything"  Tc to ATV2 (Must) and then connect that to the Modem Router. Turn off Screen Saver of course and any other programs that may interfere. Checking console MAY shed light on the problem. & Gd Luck with the next updates.....

  • My apple Tv has audio problems when streaming from my NAS server.

    My Apple TV has audio problems when streaming from my NAS server or computer and even internet. I can hear the click sound it makes when you click on the icons, but when the movie starts there is no audio. This even happens when using XBMC. I have HMDI directly to my TV suing Apple TV 2. I have tried resetting, turning off both TV and Apple TV, and changing the HDMI cable. It is driving me nuts.

    XMBC requires a hack, we cannot help with hacked devices.

  • MacBook-Apple TV Streaming Problems

    Hi All
    I seem to have problems streaming from my MacBook Pro to Apple TV. When streaming Youtube videos from MacBook to Apple TV, the video and sound start breaking out (constant short half-second pauses).
    However, I have no such problems with streaming videos to Apple TV from iPad or iPhone. When viewing Youtube videos from my MacBook (without streaming) or through Apple TV by directly accessing Youtube from Apple TV, there are no such problems either. Likewise, there are no problems streaming my iTunes videos from my MacBook to Apple TV.  The software on MacBook and Apple TV is up to date.
    Would be very grateful for your advice on how to fix this problem.
    Andriy

    Welcome to the Apple Community.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.
    The following article(s) may help you.
    Troubleshooting Wi-Fi networks and connections 
    Recommended Wi-Fi settings
    Sources of Interference
    Wifi Diagnostic Software (for Mac users)
    You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.

  • Can I connect my Lacie Space II - 2 Tb to an Apple TV and stream my movies in the LaCie to my TV through the Apple TV?

    Can I connect my Lacie Space II - 2 Tb to an Apple TV and stream my movies in the LaCie to my TV through the Apple TV?
    I would really like to have an apple TV to stream from and use also as media player in replacement of mt PC. Is this possible?
    Thanks

    Only if the content on the drive is part of your iTunes library and iTunes is running to manage the content for the Apple TV. You can't replace your PC with the drive for use with Apple TV.

Maybe you are looking for

  • Execute immediate and dynamic sql

    Dear all; Just curious....Why do developers still use dynamic sql..and execute immediate, because I always thought dynamic sql were bads and the use of execute immediate as well... or am I missing something...

  • Pass-through recording with Canon ZR25

    I have an older Canon ZR25.  Is it capable of pass-through recording from a VCR?  I can plug the VCR to the camera, and the camera to the computer via the firewire, but can't get anything to work.  Is my only option to actually record the VCR tape on

  • Premiere Pro CC14 won't play video in timeline...

    I upgraded to Premiere Pro CC14 when it came out. I've since started a new project that is a mix of stills and video with various FX. Before, everything played fine. Now, I open the project and can scrub through the timeline, but I hit play and nothi

  • Dual Monitors Arranged Vertically

    Hi.  I can't for the life of me figure out how to setup dual monitors.  My calibrated monitor is on bottom, so I want the interface/tools on top.  Can someone help me out?  Thanks so much!

  • JTree setSelectionPath(...)

    What I want: A JTree with discontiguous selections. But depending on the node that the user clicks on, I can either allow or disallow the selection to be added to the existing selected nodes. I have extended DefaultTreeSelectionModel and overriden se