TS3682 back up in different folder

i used to back up ipad in i cloud and then change preference to backup in computer. which location does the back up goes.? if i want to backup in a location of my own how to i go about

I was trying to move pictures to new computer to work with. Did backup on old computer and copied it to LR file in Pictures. When I open the file it lists all folders with correct # of picture When I click on a folder it says “Folder can not be found”
When display grid thumbnails each picture is shown but all gray
Loaded new pic from SD and it appears to be working well
Yhanks for your help

Similar Messages

I recently moved all my logic audio sessions to a back up hard disk. Also updated to Loin OSX. My Stylus RMX is not working. I get a message Missing Element on Part 1...Currently not installed on their computer or has been moved to a different folder. An

I recently moved all my logic audio sessions to a back up hard disk. Also updated to Loin OSX. My Stylus RMX is not working. I get a message Missing Element on Part 1...Currently not installed on their computer or has been moved to a different folder. Any help out there?

Hi
Sounds like you may have moved the RMX library folder?
Is RMX fully updated (for Lion)?
Check your hard drives for a file called SAGE:
It (or an alias of it) is normally found in the <USER>:Library:Application Support:Spectrasonics.
Note that on Lion, the <User> Library is 'hidden'... quickest way to get there is to hold down Option (Alt) whilst using the Finder:Go menu
CCT

HT201361 Is it possible to save the screenshot files to a different folder than desktop. How can I change the folder?

Is it possible to save the screenshot files to a different folder than desktop (that is the default). How can I change the destination folder? Thank you, Sal

To change the screenshot capture location to a new place on your Mac, first think of a location that would serve you properly. We like to place ours in a "Screenshot" folder located inside of the User's "Pictures" folder. To change the location to this new location, open the Terminal and enter the following command:
defaults write com.apple.screencapture location /Users/[u]/Pictures/Screenshots/
Replace "[u]" with the name of the user on your system. Once you have entered this command, let's restart the screen capture utility by restarting the SystemUIServer by entering the following command:
killall SystemUIServer
You can optionally log out and back in instead of entering this second command, thus restarting the SystemUIServer. Once restarted, all screen captures taken from here on out will end up in your /Pictures/Screenshots/ folder in the User's home folder on your Mac.

How can I save a 2009 project in 8.5 without making it a copy in a different folder

I have a project where some files have accidentally been saved in 2009. I want to save them back to 8.5. The save for previous version option makes me create a different folder and then gets the heirarchy incorrect. How can I resave all VI's in there current location without having to save under a different folder?

Steve Block wrote:
I have a project where some files have accidentally been saved in 2009. I want to save them back to 8.5. The save for previous version option makes me create a different folder and then gets the heirarchy incorrect. How can I resave all VI's in there current location without having to save under a different folder?
You don't- you let LabVIEW save them then move them then resolve the conflicts the next time you open them since the vi's will load dependancies from a different location and you'll get a bunch of warnings and conflicts.
This type of mistake can cause a lot of heartache- its painful but, like putting your hand on the grill, you soon learn not to do that again!
Jeff

How do I move a user's sparse image BACK into the correct folder

Please help if you can!
I accidentally moved the sparse image connected to my administrator account into the 'shared' folder. (I was trying to confirm shared settings between users, and inadvertently moved the file.) There were no error messages or warnings, the file moved easily into the shared folder.
After it was moved, I was unable to login to that user's desktop, and the only explanation is "...because there was an error." The only thing I can think of is that it's because of the moved sparse image for that user.
But, I can't move it back. The computer won't allow me to move the file, and when I try to copy it to the appropriate folder I get an error message that there is not enough disk space. I tried creating a new administrator account, but that didn't work. I've tried changing the file-sharing settings, but nothing I've thought of doing has worked. I've tried turning off Fire Vault for that user, but I can't seem to do it from a different user account.
If you have any ideas of how I could log into this user account, I would be very, very grateful. It's my main desktop, and I need access to the files located there!
Please help!!

Dear jsd2 and William,
Thank you both so much for your help. I cannot tell you how much I appreciate both of you taking the time to help me figure out this problem.
William - The Library folder was basically empty. It had some Quicktime preferences in it, but nothing else. The Terminal didn't even recognize it, and I actually couldn't delete through Terminal, but simply sent it to the trash. Even so, I couldn't log in the user account.
jsd2 - I was able to log in as root and had no problems opening the sparseimage. I then copied all of the data to an external HD. Once that was finished I verified the sparseimage mounted disk, but there were no problems found. Even so, I repaired disk, but still no problems found. Even so, I couldn't log into the user account. I did get to the point where it asked for the master FireVault password (by entering the wrong password 3 or 4 times). It accepted the master password, but then it wouldn't let me change the password and login (the master password only led me to a new-password screen).
So, after verifying that ALL of my data was safely on the external HD (including music, pictures, mailboxes, files, etc...), I deleted the user account and home folder for the account I was locked out of. Then, I created a new account, and manually transfered the necessary files back into the user folder. Then, I restarted my computer and breathed a huge sigh of relief when my wallpaper came up on the screen. About 98% of my settings are in tact. All music, pictures, files, and e-mails survived. Although I have to re-ad the actual e-mail accounts, all of the other account settings are there.
I will leave the copied files on the external HD for at least a few days or a week to make sure nothing important is missing, then I will set up Time Machine and start making regular backups.
So, thank again, both of you, for your invaluable help, which led to a successful, if somewhat roundabout, solution to this problem.
Also, jsd2, I don't remember if I turned Fire Vault off when I upgraded or not. It seems to me that the directions said I should, and in which case I would have - but the upgrade wasn't recent, so I don't really remember. (Or rather - clearly I didn't, if what you say is true.) At the moment, FireVault is off for all accounts on this computer. I want to turn it back on, but, to be honest, I'm really scared to now....Since I don't know what caused the problem in the first place, I'm leery that if the problem hasn't been fixed I might end up in the same situation again. Although I hadn't had any problems before today, and I know that I must have done something in the 'sharing' settings that created the problem.

Tryed moving music to a different folder in my external, but they disappeared...?

So I've been trying to organize my music lately, and have it all on my Seagate external hard drive. I was trying to move a large chunk of folders with music in them to a different folder, and when I dragged it over, it tried to start moving them when a message along the lines of "Cannot move files to this folder because "" already exsists." (It specifically said "") I clicked OK, assuming that it would all have stayed in the same folder it was originally in, but when I went to go look for it, most of my music was gone. Now the only folders showing up in my externals music folder are A and B artists.
Now, the part that REALLY throws me off, is that when I open iTunes, I can play all my music that I could originally, and it looks like the space is still being taken up on my external. I assumed I could find my music by clicking "show in finder" but it wont show where the music is. All I see is this in the finder:
And nothing will show up.
Now, I was bummed when I couldn't find my music, as I was assuming it simply got erased somehow. The fact that it is still there is just plain confusing to me.
Thankfully, I have most of my music backed up on a friends hard drive, so I haven't completely lost everything, BUT I'm still incredibly curious as to where this stuff went. I also don't want to add a ton of double files onto my hard drive and take up lots of extra room.
Sorry for the long winded question, I just figured the more information, the better.

Get info on the drive. What format? FAT drives may be behave erratically for heavy-duty use of the kind you are doing. It's okay to leave a flash drive FAT formatted for light use but for heavy-duty file transfer I think you can encounter issues.
iTunes does not look at files directly. It maintains a database (library.itl) of the files in its collection. When you play a track it looks up where that file is located and goes and plays the file in that location. If you manually move a file or folder used by iTunes that database is no longer correct and you get broken links ( ! ). If you want to move files or folders with iTunes you have to let iTunes do it. Since iTunes is organizing your library there isn't much flexibility in what you can do other than move the whole collection to a different folder by changing the media location preference in preferences.
Lion - Disk Utility - https://discussions.apple.com/message/16925522 - repairing your drive using Disk Utility on Lion's recovery partition.

Can't drag files from Organizer 13 to different folder

I recently installed PSE13 on my PC running Windows 8.1. I've also downloaded the latest update and even the patch which corrected the mouse scrolling problem. Now I have a new problem. When I'm in the Organizer, I am no longer able to drag files to a different folder. For instance, I have a folder on my desktop which contains the pictures and videos I downloaded from my camera. I am able to see these files within the organizer, and the organizer clearly shows that the files are contained within the folder on my desktop. What I want to do within the organizer is to move these files by dragging them to my Pictures folder. The program will no longer allow me to accomplish this task. I use to be able to do this with no problem, but not anymore!! Is there a fix for this problem??? Thanks! Jeff

No, there is no error message. Your second question, asking if I first selected thumbnails, etc., prompted me to go back to the organizer to review exactly what happens when I try to select and drag a file to a new folder. And, because of your question, I have discovered new results: the first time I tried to select a picture, the normal hand appeared, but when I attempted to drag the file to a folder, all I got was the hand drawing a dotted rectangular box, and I could not drag the file to any folder. I tried this two more times with the same result. Then, I discovered that if I click on the far right side of the file thumbnail, I could actually drag it to a different folder. So, now I know precisely where to click on a thumbnail in order to successfully drag it to a folder. However, in previous versions, I could click anywhere on the thumbnail and drag without any problems. So, I will consider this problem "mostly" solved, and hopefully Adobe will address this problem on a future update. Thanks for your help!! Jeff

Can i store vedios in different folder from my system in ipod nano 7G

I copied vedios but all are coming in same place, please suggest ipod nano 7G, does it support placeing vedios in different folder, if then how i can do.

Best advice: use two libraries in separate accounts and then use iPhoto Sharing to share the pics:
For iPhoto 09 (version 8.0.2) and later:
If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
Remember iPhoto must be running in both accounts for this to work.
Tha advantage to the above is that it's really safe, especially for new users. However...
If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc.
Quit iPhoto in both accounts. Move the Library to the Users / Shared Folder
(You can also use an external HD set to ignore permissions, a Disk Image or even partition your Hard Disk.)
In each account in turn: Double click on the Library to open it. (You may be asked to repair the Library Permissions.) From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.
Regards
TD

What's the point of a virtual copy if it can't be in a different folder from the master?

When I spotted "Make virtual copy" on the context menu, I thought "Great - I can organize my photos in different ways without wasting disk space by using aliases!"
But when I tried to move the virtual copy to another folder, LR said Nope!
So I moved the master - and the copy moved with it.
What am I missing? I've seen the reference to Smart Collections, but they seem to be based on ratings or flags, not arbitrary subject-matter groupings.
So I created a "dumb collection" (my term, in distinction from the automatic groupings), made virtual copy and copied the virtual copy to the collection.
Then I then went back to the original folder and deleted the virtual copy from the original folder.
It vanished from the collection as well.
Is a virtual copy merely a way to make and save an alternative edit of a photo - but only in the same folder as the original?

A virtual copy is virtual. It is a record of the processing settings you made held in the database. LR never makes changes to the original files and does not create copies of original files (except on import if you so choose). A new file is created on export with the processing settings recorded in the database. The folder structure is irrelevant to LR other than LR needs to know where the file is on your computer.A virtual copy does not make an actual copy anywhere on your hard drive. It takes up no space as it is just a few lines of metadata recorded in the catalog. Hence virtual copy.
The point is that you may require several different versions of the same image file, different crops, different processing settings etc. These can all be recorded in the catalog and when you require the particular version you export it. On export it can be sent anywhere you like.
I would suggest you have a look at the LR manual through the help system (press F1 when LR is open) and have a look at some of the video tutorials in order to understand the basics of LR

How do I export all the photos I imported back to their original folder

How do I export all the photos I imported back to their original folder just as they were, they haven't been modified, adjusted etc. I imported them by mistake.

You don't need to worry. You won't lose photos when the 30 day trial expires.
Lr is different than other photo editing software in that it works with a data base (called the "catalog"). Lr does not write anything into the image pixels but stores everything that you do in Lr into its catalog (=data base). That way, when the trial expires your images will still be there, but - since you cannot access the Lr catalog anymore - your photos will be in the state they were before you imported them into Lr.
When you work with Lr you have to really understand the concept of the "catalog", if you don't you will come into very frustrating situations. The concept of "catalog" involves above all that you need to think of your images based on two different files that are in different locations on your computer. One is your image file (Raw, JPG, TIFF) and the other is the data entry written for this image into the Lr catalog. Lr constantly updates this catalog (without you having to hit <save>) and constantly combines the image file with the data from the catalog. From this follows the demand that you take care of the Lr catalog as much as you take care for your image files - by knowing where they are located on your computer and by doing regular backups.
Would it be worth the investment? In my opinion definitively "yes"! I work with Lr since version 1 on a daily basis and would not want to miss it. Lr gives you superior image editing possibilities (in the Develop Module) but - as already said - is also a superb image management tool. Lr will keep track of all of your images irrespective if they are on internal or external hard drives. With Lr you have all of your images available all the time.
But Lr has also a steep learning curve. You cannot just jump in and do things because you'd create havoc and become frustrated. There are excellent books but for starters I would recommend that you watch the video tutorials on Adobe's website. You learn from them easily because you see on your screen what the instructor does, where he clicks, where the different tools are, etc.
Here are some links:
http://tv.adobe.com/product/lightroom/
http://tv.adobe.com/show/adobe-evangelists-julieanne-kost/
http://tv.adobe.com/show/learn-lightroom-3/
If you decide to buy, you can do so on Adobe's website. You will then be e-mailed a serial # that will unlock your trial version for indefinite time.

II am exporting a song to disc. The mix down is playing back in a different key. What am I doing wrong, or how do I get Garage bane to mix down in the key the song in which the song is recorded?

I am exporting a song to disc. The mix down is playing back in a different key. What am I doing wrong, or how do I get Garage bane to mix down in the key the song in which the song is recorded?

Three basic steps to get you started:
You set the tempo and Rhythm when creating your project:
Launch GarageBand and and select "New Project" from the panel: Pick a suitable template, for example "Song Writing":
Then, in the next panel that opens "New Project from Template" select a folder and a name to store the project and set the basic parameters: Song key, tempo, signature; for example for a song in C-major, 4/4, 100 beats per minute set it like this.
If you later want to speed up the song or slow it down, use the LED display at the bottom of the window. Click on the leftmost icon to change it to show the metronom for "Project View" like this. Then you can change the basic settings:
Regards
Léonie
P.S. The GarageBand Help - accessible from the main menu bar "Help > GarageBand Help" or ⌘? is quite good and should get you started easily.

Can any one tell me how can I move to a different folder pictures, that I've cloned, without them staying aggregated? They all come together to the other folder and I don't want that- thanks

Can any one tell me how can I move to a different folder pictures, that I've cloned, without them staying aggregated? They all come together to the other folder and I don't want that… thanks

There's more to it than that.
Folders in Aperture do not hold Images. They hold Projects and Albums. You cannot put an Image in a Folder without putting it in a Project or an Album inside that Folder.
The relationship between Projects and Images is special: every Image must in a Project, and can be in only one Project.
Images can be in as many Albums you want. Putting an Image in an Album does not move it from the Project that holds it.
You can make as many Versions from a Master as you want.
What you want to do may appear simple to you, but it still much adhere to how Aperture works. I still can't tell exactly what you are trying to do (specifically: Images don't live in Folders; moving an Image from a Folder is non-sensical).
It can be very confusing (and frustrating) to get going with Aperture -- but it does work, and can be enormously helpful. If you haven't, take a look at the video tutorials on Apple's Aperture support site.
I feel as though I haven't helped you much -- but we need to be using the same names for interface items in order to get anything done -- and my sense is that you still haven't learned the names of the parts.

Archiving file in different folder in sender file adapter

Hi,
I have a requirement in witch i have to pick 7 different file from seven different folder.
for this I am using advance selection tab and defining all the other folder path.
but my problem is I have to archive the different file in different folder .
For exm..
/folder1/file1.txt need to be archive in /archive_filder1/file1.txt
/folder2/file2.txt need to be archive in /archive_filder2/file2.txt
/folder3/file3.txt need to be archive in /archive_filder3/file3.txt
can any one tell me that how to define the dynamic archive folder path??.
regards,
Navneet

Hi Navneet
In File Access parameters --> Target Directory
Use this type of Directory name
\XIDEV_STORES\%store%\sapoutbound
here %store% will be changed accordingly
e.g. if file will come for store 001 then this %Store% will be replaced by 001 and file will be placed in this 001 folder and if file will come for store 002 then this %Store% will be replaced by 002 and file will be placed in this 002 folder over FTP.
For to achieve this Go to Advanced tab
For Variable Substitution check mark Enable
Now speciofy the parameter values for Variable Name and Reference
Under Vriable name specify = store
Under Reference specify = payload:WP_PLU02,1,IDOC,1,EDI_DC40,1,RCVPRN,1 -
You have to give full path name here that where this store variable is located into IDOC.
Hope this example will help you
Regards
Dheeraj Kumar

How to take pix out of a slideshow and back into a simple folder in iPhoto?

I was only experimenting with slideshows and now have 61 photos in a slideshow which I want to revert back to a simple folder of pictures. I do not want those pictures in a slideshow.
How can I get all of the 62 pictures in that slideshow to revert back to 61 photos in a regular folder in iPhoto '08?
I guess I should have duplicated the folder of 61 photos before I made it into a slideshow. Then I could have just deleted the slideshow. Yes or no?
Lorna from Southern California
web.mac.com/lorna6

Lorna:
You can reduce the number of Events by creating Smart Albums with criteria that you would like to have the photos grouped by. If you'd like the events to be by year and month, set the smart album's criteria to be Date is in the Range 01/month/year to 30/month/year. Then select the contents of that SA and use the Events->Create Event menu item to create an event with those photos. Then change the date to the next month and do the same. You can use any criteria you want for the SA but Events are time based and work better that way.
P.S. are you in So Cal. permanently or just visiting. Wanna trade houses?
OT

Going back to the last folder while browsing music

Hey.
I don't know how comprehendable the subject was, but it's very hard to explain.
Anyway, I copied my iTunes library from my PC to my new iMac, and I don't want to re-add all the music that's in my Library, because I want to keep all the plays. So, I have to manually right click on each song, manually locate the file, and then add it through there. I'm sure you know what I mean.
However, it's annoying to have to browse all the way to the exact same folder each and every time I do this. Somehow, do not ask me how I did it, but I managed to make every time I browsed a new song it took me back to the last folder I was in, which made this a LOT less time consuming. I have no idea how I managed to do this, but alteast I know it's possible now.
My question is, how do I make iTunes go back to the last browsed folder, when adding new songs like I mentioned? I want to fix my music once and for all, but it takes so much time doing it like this so I just can't find the strength.
I'd appreciate any answer.

Really need help with this, and sorry for bumping.

TS3682 back up in different folder

Similar Messages

Maybe you are looking for