TS3682 i upgraded to ios 7 to see if i liked it. i do not like ios 7 and i would like to go back to ios 6 that works just fine. need ansirs thank you. ou812vh@live.ca

down graded from ios 7 to ios 6.1.4

Sorry, Apple has no approved method to downgrade the version of iOS on your iDevice. You can voice your displeasure with the iOS by leaving feedback at the appropriate subsection from the link below.
http://www.apple.com/feedback/

Similar Messages

I have quicktime pro and it does NOT have the screen record mode that Quicktime is suppose to have. Can I uninstall it and go back to an older version that would have screen recording? If so, how? Step by step needed. Thank you for your time.

I have quicktime pro and it does NOT have the screen record mode that Quicktime is suppose to have. Can I uninstall it and go back to an older version that would have screen recording? If so, how? Step by step needed. Thank you for your time.

Did you remove Quicktime X?
On a normal install Quicktime 7 is installed in the Utilities folder and Quicktime Pro in the main Applications folder.
You will need to reinstall OS X to get Quicktime X back if you have deleted it.
I notice yor profile says 10.5.8. Quicktime X is only available on 10.6 and above.

Upgraded to IOS 7 when I put my headphones in it gets all crackly and I can't hear the voice but without headphones it works just fine

When I put my headphones in it gets all crackly and I can't hear the singing but when there's no headphones in it works perfectly fine

It could be bad headphones. Try another pair. It could be gunk in the headphone jack. Try cleaning it out. It could be a bad headphone jack. Make an appointment at the Genius Bar at your local Apple Store.

Hello. I need to define a mesure in a picture: I took a picture of an object with a ruler and I want to signify to photoshop "this segment = 1 cm". How to do? Thank you!

Hello. I need to define a mesure in a picture: I took a picture of an object with a ruler and I want to signify to photoshop "this segment = 1 cm". How to do? Thank you!

That's a good precaution, norm. It should be no problem is you have an object on a flat surface next to a ruler. It gets trickier in security camera frames.
Anyway that is one example. Anne can look further into the measuring tools of Photoshop Extended to see if it helps.
A note on the screen resolution thing. When I calculate the screen resolution, I go into Photoshop > Preferences > Units and Rulers
and enter it here in place of the default 72 ppi. Then when I use View > Print Size, the on-screen rulers will match a physical ruler.
That's if you wanted to look at the actual printed document size onscreen.
Gene

Hello, I'm using the same apple id on my Ipad and Iphone, and anything i do and my ipad reflects on my iphone. if i download an app on my iphone it also downloads on my ipad. Can i stop this from happening. i need help. thank you.

hello, I'm using the same apple id on my Ipad and Iphone, and anything i do and my ipad reflects on my iphone. if i download an app on my iphone it also downloads on my ipad. Can i stop this from happening. i need help. thank you.

Yes, under the Settings for the store, you can turn off the auto download for purchases, that way if you purchase an app on another device it will not automatically download on that device. You would need to do this on both your iPad and iPhone.

HT5219 I would like to use my iMac 7,1 as a monitor for my Mac mini 2012. Is that possible and if yes, what type of cable connection do I need? Thank you.

I would like to use my iMac 7,1 as a monitor for my Mac mini 2012. Is that possible and if yes, what type of cable connection do I need? Thank you.

No. Your iMac only has DVI video connection. You would need an iMac with Thunderbolt.

Hi, I would like to deactivate CS6 from my old laptop and reactivate it on my new one. In order to re-activate it, what is the process? Do I need to download the product like the first time? Is there something to be careful of? Thank you!

Hi, I would like to deactivate CS6 from my old laptop and reactivate it on my new one. In order to re-activate it, what is the process? Do I need to download the product like the first time? Is there something to be careful of? Thank you!

Hi petrosk47967892,
In order to reactivate this product on a new machine, you can simply download & Install the product on the new machine using the following link and enter the serial number when prompted. Make sure to deactivate the product from your old machine by launching any one of the products, go to Help>Deactivate/signout.
Download CS6 : Download CS6 products
Cheers,
Kartikay Sharma

Lost all email gmail deleted by mistake need help thank you

lost all email gmail messages deleted by mistake need help thank you.

Mail 2.x doesn’t store mail in standard mbox format. The only way you might find Mail messages in a “recovered” mbox file is if it was a Mail 1.x file that Mail 2.x left there after the conversion to the new *.emlx format when you upgraded from Mac OS X 10.3 or earlier to Mac OS X 10.4.
If you’re running Mac OS X 10.4 (Tiger) and don’t have a backup, what you should have tried to recover are as many *.emlx files as possible. Data Rescue II may be able to do that, but the documentation doesn’t say so. The only data recovery utility that I know for sure can currently recover deleted *.emlx files is FileSalvage.
That said, you may still try to import those mbox files as Other (not as Mail for Mac OS X), and hope that they don’t contain garbage that causes Mail to crash — you may look at their contents with a text editor first to check whether there are actually any emails there.
Beware, however, that anything you do with the computer may cause the deleted *.emlx files to be overwritten if you don’t try to recover them first.

Hello, I use photoshop cc 10 days and I did a lot of files with layers and channels. For two days in two different locations that only happens in some documents when you reopen the job done no more .. Example 6 channels on the facts I see only one .. Than

Hello, I use photoshop cc 10 days and I did a lot of files with layers and channels.
For two days in two different locations that only happens in some documents when you reopen the job done no more .. Example 6 channels on the facts I see only one ..
Thank you for your attention.
Annalisa

Don't understand what you writing here. Screen shoots would be most helpful.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

After last update itunes wouldn't open on my laptop (windows 7). i uninstalled it but now it won't re-install but just takes me to 'thank you' page - help to reinstall please...

Recently i updated my the itunes but after doing so although it would open on my computer for a bit, it wouldn't recognise it - ie, syncing phone or I could open the program but when trying to redeem a gift voucher it didn't recognise the program on my PC and suggested i install it!. Today it wouldn't open at all so I tried to uninstalled it so i could reinstall it from scratch but now it won't re-install but just takes me to 'thank you' page.
- help to reinstall please...

Hey Elaine07!
I have an article here that can help you with that issue. This article will help you make sure you have uninstalled iTunes correctly and help you troubleshoot the launch issues you are seeing:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Take care, and thanks for visiting the Apple Support Communities.
-Braden

My iPod is up to a 4.1 ios, and it won't update to a 5.1 which I need for some of my apps for school. It keeps saying that my internet connection is bad; but, it works just fine. What do I need to do?

My iPod is up to a 4.1 ios, and it won't update to a 5.1 which I need for some of my apps for school. It keeps saying that my internet connection is bad; but, it works just fine. What do I need to do?

If you get a network timeout error, then disabling the computer's security software duirng the download and update usually resovles that error.
If that is not the error what is the wording of the error message.
Note that only a 3G or 4G iPod can go to iOS 5. A 2G iPod can only go to iOS 4.2.1

I lost my iphone 5 yesterday and i tried using find iphone and i found it offline. What is best to do? Please help me. Thank you..

I lost my iphone 5 yesterday and i tried using find iphone and i found it offline. What is best to do? Please help me. Thank you..

If you forgot (or don't know) your passcode, restore the device from backup on the last computer it was synced with when the passcode was turned on... this will remove the passcode. If you do not have access to the last computer it was synced with, or you don't have a backup, you will have to force it into recovery mode & restore as a new device.
See this for more info... http://support.apple.com/kb/HT1212

I open a file - playback - the audio is there - doesn't appear in timeline, but I hear it, after 1 edit, the audio disappears. I have to reboot to get it back then it happens again. All suggeswtions welcome. Thank you, Randy

I open a file - playback - the audio is there - doesn't appear in timeline, but I hear it, after 1 edit, the audio disappears. I have to reboot to get it back then it happens again. All suggeswtions welcome. Thank you, Randy

Is your Premiere Elements 12/12.1 running on a Windows 7, 8, or 8.1 64 bit computer or a Mac computer?
What is the brand/model/settings of the camera recording your video?
Windows 7 64 bit PC
Footage taken from DVD through Adobe Premiere Elements
Are you sure about the Frame Width and Frame Height that you gave 720 x 484? Did you mean 720 x 480?
Yes, my err. 720X480
For the Frame Rate, was it really 29.97 frames per second and you rounded it off to 29 frames per second? Or,
is the frame rate really 29 frames per second?
If the properties that you just posted are representative of your source file, what project preset did you or the
project set for the project preset? If you are not sure, please tell us the readings for Editing Mode, Timebase, Frame Size,
and Pixel Aspect Ratio under Edit Menu/Project Settings/General.
Still having problems - haven't been able to edit project.
Thank you for your help.
Randy Klein

When I have two clips, one above the other, I would like to hear the audio from one at a time. How do I suppress temporarily one of that, in a easier way? Thank you.

When I have two clips, one above the other, I would like to hear the audio from one at a time. How do I suppress temporarily one of that, in a easier way? Thank you.

I would think you would drop down the audio level lines in the "Stereo" tab (FCP 6.0.6 view to me) in the clip's video window.
But then again, in my old version, I can't play two clips at once. But I figure if the newer FCP allow you to do that, then that's what I would do.

Hi, I have a question, I would like to ask how to get into Photoshop CC 2014 English language? Thank you Dana

Hi, I have a question, I would like to ask how to get into Photoshop CC 2014 English language? Thank you Dana

First, download and install the Creative Cloud Desktop Manager if it is not in your computers Programs list since your are a CC member.
Free Creative Cloud | Download Adobe Creative Cloud free trial
Then launch it, click on Apps. Then from the menu, select Preferences.

TS3682 i upgraded to ios 7 to see if i liked it. i do not like ios 7 and i would like to go back to ios 6 that works just fine. need ansirs thank you. ou812vh@live.ca

Similar Messages

Maybe you are looking for