TS3682 Is it a problem to restore a backup from an iPhone 4 with IOS 7.1 to iPhone 5S with IOS 7.0.1 ?
Is it a problem to restore a backup from an iPhone 4 with IOS 7.1 to iPhone 5S with IOS 7.0.1 ?
Yes. You cannot Restore a Backup to an Earlier version of iOS.
Your iPhone 5s needs to have iOS 7.1 to match your iPhone 4 on iOS 7.1
Similar Messages
-
Problem Restoring iTunes backup from DVD
I've searched and haven't seemed to find an answer to my particular issue, so if this has been asked and answered apologies. Here's my situation:
I am able to backup my entire library on my windows computer to move everything over to my imac. During the backup I didn't get any error messages. I restore the backup from DVD but for some reason one of the disks just will not restore and I have to keep skipping it. I can open it up and I see the files there, compilation folder with songe folders inside, some audio books, an album or two purchased from iTunes and a few albums from CDs that I actually own the physical media. I presume something is corrupted but don't know what.
My question is this: has anyone else experienced a similar situation and if so, were you able to get the disk to restore? If not, is there a way that I can select just the items from this bad disk to backup so that I don't have to do the entire back up again? As previously mentioned, I can browse the "bad" DVD and can see the items and folders? At the very least, I'd like to backup and restore the itunes purchased music and audio books and compilations; the other items I can just import from the cds that I own.
Thanks...I'm really getting frustrated after having tried this five or six times.can somebody help i/m basically having the same problem but my error message says an unknown error occurred
-
I recently downloaded the latest iOS 7.1. A few days later I had an unrelated problem with my phone and Apple Store provided me with a new iPhone 5. However, when I tried to restore my backup from the Cloud, it said that iOS7 is required. what do I do?
Update your iphone to ios 7.
-
Faced with the problem of restoring a backup!
Faced with the problem of restoring a backup! Requires a password, the friends God knows, I did not set it, or should be able to set that do not fit! There is a solution to my problem?
If you do not know the password you will need to restore the device.
You can restore it with your last backup iTunes made that has no password.
See this,
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device -
when i want to restore backup from icloud this message will appare on my iphone 4s *move your mobileme account to icloud* whats mainig of this message?
Apple has shutdown MobileMe. You have to switch over to iCloud.
-
hello, can not restore my backup from computer to my iphone because the iphone has ios 6 and the backup was done on ios 7
I just changed my iphone for some problems so my last backup was done under ios 7 and the new iphone has ios 6 that i would like to keep
-
I have problems with the iMessage activation with a new iphone 4S I buy a new iphone 4S with another company (movistar) and restored my backup from a 4 (telcel) and on the imessage activation I get incorrect activation but I can get imessage with my apple id what can i do ?
I restored it and activated it as a new iphone and tried to activate imessage and is the same error
Also I am receiving a message from +44 7860 015000 with REG-RESP?v=3;...........
But I can't get the activation -
I restored a backup from my ipod to my iphone, now my iphone thinks it's my ipod
Hi all,
When I got an iPhone 5, I restored a backup from my iPod 5 over the top of the iPhone.
Now my iPhone thinks it's my iPod.
Really, my only problem is when I use iMessages through my iPhone to my iPod, I get the message on the iPod but also right back on the iPhone like it's an incoming message.
Any ideas?Really, my only problem is when I use iMessages through my iPhone to my iPod, I get the message on the iPod but also right back on the iPhone like it's an incoming message.
If you go to Settings -> Messages, you should see a list of addresses under "You can be reached by iMessage at." Uncheck the email address that the iPod uses and you should stop getting those iPod-only messages.
While you're there, also check the "start new conversations from" on the iPhone and make sure it's your number. That setting has a tendency to shift to an email address after a restore, which might be exacerbating the situation
(While you're still there, Settings -> General -> About -> Name to rename the iPhone to something besides the iPod's name!) -
After moving from Canada to the US, getting a new iPhone 5C, and restoring my backup from iCloud, I can't update my apps. I get an error message that my account is not valid in the Canadian App store and I must change to the US store. How do I do that?
Change here:
Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region.
You must have a verified billing address & be located in the country whose store you are trying to use. -
When restoring my backup from my old iphone via my computer to my new iphone, it gets all the way through the restore and then at the end it says there was an error and doesn't restore. Doesn't say what error.
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Also... See Here > Configure security software -
Restore the backup from tape to some other server
Dear All,
I need to restore the backup from tape to some other server.PLease suggest the command and setp to do that.
Regards,
KumarHi,
I went through as per your action plan it is giving below error I found a solution on meta doc id 559190.1 but i am not able to understant how to start observiced as it is mentioned in the doc id.
allocated channel: t1
channel t1: sid=2386 devtype=SBT_TAPE
channel t1: Data Protection for Oracle: version 5.4.1.0
Starting restore at 09-MAY-10
channel t1: looking for autobackup on day: 20100509
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 05/09/2010 11:57:01
ORA-27191: sbtinfo2 returned error
Additional information: 2
RMAN>
Thanks, -
How do you restore a backup from preferences
HI Everybody:
I am trying to restore a backup from iTunes from my backup. However, it's telling me that the backup is not valid. So I am in preferences, and under Preferences>Devices there are all my backups...
How do I restore from one of those ones?
Thanks in advance
PaulAre you restoring to new phone?
~Lyssa -
Can anyone help please? Backed up Iphone 4s to icloud and received the replacement one. So I am trying to restore from icloud. Unfortunately, the phone tells me that the IOS system (showing 6.1.2 required) is incompatible and so are the previous 3 backups... I dont have the laptop to hand in order to backup to itunes either. I'm guessing I cant set up as a new phone, get the latest IOS system update and then restore the backup from icloud... or can I?
On your new phone: Settings>General>Software Update. Once done: Settings>General>Reset>Erase All Content & Settings. You'll now be able to use your backup.
-
HT1766 when restoring the backup from itunes the iphone refuse the request
When restoring the backup from itunes the iphone refuses the request. How to restore to its original OS version?
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Also... See Here > Configure security software -
Steps to restore RMAN backups from tape to disk
Hi All,
using Netbackup Veritas Volume
DB:10.2.0.3.0
OS:AIX 64 bit
Could nayone please share the steps to - restore RMAN backups from tape to disk.
An early reply would be appreciated!!
Thanks for your time!
Regards,Hi,
I went through as per your action plan it is giving below error I found a solution on meta doc id 559190.1 but i am not able to understant how to start observiced as it is mentioned in the doc id.
allocated channel: t1
channel t1: sid=2386 devtype=SBT_TAPE
channel t1: Data Protection for Oracle: version 5.4.1.0
Starting restore at 09-MAY-10
channel t1: looking for autobackup on day: 20100509
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 05/09/2010 11:57:01
ORA-27191: sbtinfo2 returned error
Additional information: 2
RMAN>
Thanks,
Maybe you are looking for
-
To get mail to access my exchange email I have to use a private smtp server as the passing in the settings for our actual exchnage server have never worked. But that does at least work. With iCal I have never been able to access my exchange calend
-
How do I print out the value returned by a method in main??
I'm a total newbie at java, I want to know how I can print out the value returned by this function in the "Main" part of my class: public int getTotalPrice(int price) int totalprice=price+(price*0.08); return totalprice; I just want to know how to pr
-
ExportPDF does a poor job when converting pdf tables to MS Excel tables - Any advice?
ExportPDF does a poor job when converting pdf tables to MS Excel tables. The resulting file had several lines merged into one and had strange font sizes and line heights and widths. If needed, I can send both files to show what happened. I am using A
-
Hi, Can anyone guide me about automatic task list pop up while creating maintenance order. Thanks DM
-
SQLException :Too many client tasks problem
Hi, In my Standalone Java Swing application, iam using connections to the MS-Access Database using Connection pooling..Iam initializing around 10 connections. After executing, performing some operations on application, after sometime...i get the SQL