TS3694 1015 error how do i resolve this please
1015 error how do i resolve this please
You find an answer elsewhere or you buy a new phone that's not jailbroken.
You can't get help here per the terms of service.
Similar Messages
-
TS3694 2006 error how do i resolve this problem
how can i fix 2006 error please
Did you try actually reading the article you linked from?
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service. -
I have one itunes account with two phones assigned to it, sons and daughters, (5s). When i phone one of the numbers both phones have started to ring, only when connected to wifi at home. The problem does not occur when not connected to wifi. How do i resolve this please? texting is fine it is only when ringing one of the numbers.
<http://support.apple.com/kb/HT6337>
"To turn off iPhone Cellular Calls on a device, go to Settings > FaceTime and turn off iPhone Cellular Calls." -
I cannot shut down my iMac (for days now) as I get the following message: "Photos are being imported to the photo library."
Now as far as I know there are no photos being imported and even if there were 5 days is crazy. How can I resolve this please?
JLB284Open Activity monitor in Utilities, go to the CPU tab>All Processes, and note any process that would appear to be related to importing photos, such as iPhoto, and use Force Quit. This may only be a temporary fix, as it may start all over again when you reboot. If that happens, we need to do some more investigating.
Also, close all open Applications, then open Terminal in Utilities and copy/paste and hit return, then post the output of this command.
lsof -l +L -R -V | grep / -
New Error--How do I resolve this issue?
How do I resolve this issue?
Hi
As you have already posted similar issue on your last post , I would carry on that thread.
Please respond to the previous thread.
Thanks,
Sanjit -
No Disk Error - How do I resolve this...
Every now and then while using itunes or connecting my ipod I get a box popping up saying:
header; iTunes.exe - No disk
There is no disk in the drive. Please insert a disk into drive \Device\Harddisk\DR5.
I try and click cancel or continue and sometimes it resolves itself. How can I get this msg to go away permanently???
I'm not much of a computer guy so hopefully you can spell it out for me!
Thanks!As long as it is a MacBook Pro labelled DVD analyzing a MacBook Pro, Disk Utility should be fine as far as analyzing basic directory structure issues with the Repair Disk and Verify Disk functions. I say basic, because Alsoft Disk Warrior when it repairs the disk directory is much more thorough in its efforts to construct a brand new directory to replace one which is damaged than Disk Utility or fsck. Regardless of the method used, directory damage can have the same symptoms as a dying hard drive. Even a modern MacBook Pro is not immune from its drive dying quickly. And since repairing the directory is a much more invasive routine than pure data recovery, I only recommend fixing the directory on a machine that has been backed up, or you have at least attempted a data recovery with Prosoft Data Rescue.
-
When I close labview I get a Visual C++ runtime library error, how do I resolve this issue?
I am using Labview 2012 (64 bits) on a Windows 7 OS.
The error code is R6031 - Attempt to initalize the CRT more than once. This indicates a bug in your appilcation.There are a couple of potential problems here:
- What is the definition of the Struct parameter? The boolean used in the struct may have a different representation than LabVIEW's boolean. Confusingly, on Windows, BOOLEAN is a byte, and BOOL is an int. (https://msdn.microsoft.com/en-us/library/windows/desktop/aa383751%28v=vs.85%29.aspx) In LabVIEW, a boolean is a byte. If the representations don't match, you'll have problems.
- The "arg4" array parameter contains only a single value. How large should that array be? You need to pre-allocate the array to the correct size (using Initialize Array), or at least set the minimum array size parameter in the Call Library Function Node configuration.
- Check the numeric representation of the "arg4" parameter. You build an array of a 32-bit int, but pass it as a 16-bit array. LabVIEW will coerce to the type specified in the Call Library setup (as indicated by the coercion dot), but it would be a good idea to get the data type right instead. -
How do I change the "sign on to Revel" box when trying to get my PC to update my Ipad. An incorrect email seems to be permanently ensconced there preventing me access?
You are not going to be able to run your old system from the backup on this old computer as the hardware is incompatible.
You need to get a new computer or a refurbished one. -
I CAN NOT RECEIVE TEXT MESSAGES FROM PEOPLE USING IMESSAGE
On an iPhone your iMessages will go to your phone number.
You can select another email to use on iPod or iPad.
Go to settings
Messages
Send and receive
Check your phone number and uncheck the common Apple ID you share so your messages will not go to other devices. -
That doesn't make sense, unless you are trying to buy it as a gift, or don't have enough store credit to pay for it.
What is the message it says? -
How can I resolve this please?
Add To Salesforce
Add to Salesforce with the following:
File attachments: 0 of 1
You can't add to Salesforce until a person is selectedHave you tried restarting your WiFi router, and checking with the manufacturer to see if there are any firmware updates available for it?
-
while updating iphone, itune gave me error of 1015 which tells that my iphone is much better than from which that i am updating. But now my iphone is still in restoring mode how i can resolve this problem.please tell me
I just had the same problem with my iphone, only thing i could do was completely restore factory settings, lost a bunch of pics and contacts in the process... hope you have better luck than me
-
The iPhone "iPhone" could not be restored. An unknown error occurred (1015)......How do I resolve this issue to be able to use my phone? Rather its restored back to 4.3.3 froom 4.3.5...I just want to be able to use my phone!
mazunzo tembo wrote:
"the iphone could not be restored, an unknown error occured(1015).
Unauthorized modification of iOS > http://support.apple.com/kb/HT3743
ERROR 1015...
This Error Code is indicative of the Device being jailbroken / Hacked...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere. -
I am getting error code 3194 when i try to update my iphone 4S to IOS 6.1.3. How can i resolve this?
Here you go: http://lmgtfy.com/?q=iphone+error+3194
-
hello good samaritan out there ! am trying to restore my ios for for i phone 3G, but toward the end of the process, i am receiving an error message like "the iphone could not be restored, an unknown error occured(1015). Kindly help me resolve this problem, my iphone has been down for a we
mazunzo tembo wrote:
"the iphone could not be restored, an unknown error occured(1015).
Unauthorized modification of iOS > http://support.apple.com/kb/HT3743
ERROR 1015...
This Error Code is indicative of the Device being jailbroken / Hacked...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere.
Maybe you are looking for
-
I am working on some books that I have had no problem creating in Indesign and this week, I was doing something and got an error message and had the program crash while I was working on something and lose my unsaved work. It happens all of a sudden
-
How to use modem port on WRT54GS
Hi, I have a network like this: ADSL -> THOMSON wired modem -> LinkSys SR2016 wired switch -> LinkSys WRT54GS wired/wireless router My problem is with the connecction between the SR2016 -> WRT54GS. As you probably will know the WRT54GS has 5 ports,
-
I would like my music to appear organized in the same way on my iPad as I have done it on my Mac Book. (and on my iPhone as well) Since it is in the cloud, why does it not appear the same way in all devices?
-
All, We have just released a new beta release of Kodo JDO 2.3.0. This beta includes functional managed transaction integration, WebSphere support, many bug fixes, documentation improvements, and more. We are planning on releasing Kodo JDO 2.3.0 RC1 o
-
Reader enregistrement emplacement réseau
Bonjour, Mon problème est simple, Depuis la dernière mise à jour Adobe Reader 11.0.10 du 09/12/2014, J'ouvre un PDF depuis un emplacement réseau "\\adresse_ip\partage\nom_du_fichier.pdf" J'ajoute une note depuis l'outil commentaire Et quand je clique