TS3694 after i was trying to fix my iphone 3gs recovery mode an error occured saying error 1015
hello i failed to fix my recovery mode error 1015
Bad news first and we hope for good news as well
The device is in Recovery Mode and the data has already been deleted, you need to restore the device with iTunes in order to get the iPhone back into a working state
When the iPhone is restored you can then restore it from your latest backup using iTunes or iCloud and regain some, if not all, of your data.
The good news part only happens if you had a backup.
Similar Messages
-
I was trying to sync my iPhone 3GS and it is now stuck, saying I'm in recovery mode. I am thoroughly confused now after researching online. I'm scared to restore to original settings as I don't want to lose everything, apps, contacts, etc. Help! Is there a way to get it all back if I do restore?? Can I my stuff back through iCloud??
Bad news first and we hope for good news as well
The device is in Recovery Mode and the data has already been deleted, you need to restore the device with iTunes in order to get the iPhone back into a working state
When the iPhone is restored you can then restore it from your latest backup using iTunes or iCloud and regain some, if not all, of your data.
The good news part only happens if you had a backup. -
hi, I was trying to update my iPhone 3gS but when I turn it on again iTunes send me a message that says error 3194 occurs, please help me!!
If the screen shows a plug going to itunes, then you have no choice, It's in recovery mode. You'll be given the chance to restore from a backup either from itunes or icloud.
I assume when you got the message to update (was this for the ios or update some apps?), that was before the device when dead. At any rate, doing a restore does not change the ios. -
hi. i was trying to update my iphone 3gs but it was stop and don't let me , cold you pleas help me if is possible
What is the exact wording of any error message you received?
-
i was trying to update my iphone 3gs ios but in iphone it is saying that iphone could not be activated because the activation server is temporarily unavialable so now what should i do now plz help mee
usually that means the iPhone was hacked to unlock it from the original carrier
-
I have the latest iTunes 12.1.2.27. However, I am unable to restore my iphone4s. iTunes was able to detect an iPhone in recovery mode.
The error is something like "Unable to restore the iphone. Make sure you have the latest iTunes and try again." This is the latest version that exists currently.
I am using MAC OS X 10.7.5.
Please advise.
I have tried all the steps in the apple support.There is nothing to backup.
If the device is showing the Connect to iTunes screen, there is nothing on the device to backup.
The first step in the update process is a backup... restore the device using that backup and try again. -
I was trying to shut off my iphone 3gs and now it is stuck in shut down mode. How do I shut it down?
Try to reset by holding the sleep and home button for about 10sec, until the Apple logo comes back again.
After the phone is started again, shut it off as usual. -
I'm trying to update my iphone 3gs with itunes but just getting windows error message
I am trying to update itunes to 5.0.1 version but get an error message at end saying
There is a problem with this Windows installer package, a problem required for this install to complete could not be run.
I am clueless as to what i have to do!Is your iPhone 4 GSM type or CDMA ?
-
TS3694 How do I restore my iPhone from recovery mode when I get an error 3194 message
I am trying, unsuccessfully, to restore my iPhone 4 from recovery mode. When I attempt to restore through iTunes I get a message telling me the process cannot be completed because of an error 3194. There is no documentation or information on what this error means - and how to restore the phone when this message appears. Can anyone help?
This usually means you previosly used an iPhone hacking utility such as tinyumbrella, altering the hosts file on your computer, and blocking access to the apple server, gs.apple.com.
"Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service."
iTunes: Specific update-and-restore error messages and advanced troubleshooting -
I have an iPhone 4 thats i was trying to fix and now it will not turn on at all is there anyway that i can access my pictures and contacts from my new phone or pc? Aslo the are both on the same apple id but i dont know if that would help or not.
Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created. -
I'm trying to sync my Iphone to get some new music but getting error message 'itunes was unable to load data class info'. How do I fix it (my husband's 2 devices work fine on the PC). It's driving me mental and has stopped me putting anything new on for months. Help!!!
http://support.apple.com/kb/TS2690
-
I was trying to upgrade my iphone 4 to the isos 5, everything was done on the PC. After it was done i thought it was working,but the screen went blank and this wat it says. SIM not Valid... please help me, that's the only phone i have.
If your iPhone was hacked to be unlocked to use with any carrier's SIM card, you just re-locked the iPhone to the carrier the iPhone was sold as carrier locked when new.
-
i was trying to download latest version of itunes and my computer is saying software requires mac os x 10.6.8 or later. how do i fix this?
The latest iTunes which is 10.7 does indeed require Mac OS X 10.6.8 or newer. What version of Mac OS X are you running and on what model Mac?
-
I was trying to fix my screen resolution and now it's stuck on auto detect cannot display this video mode. I tried another monitor and it still won't show anything. I'm locked out
Reset the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
Next try Safe Mode boot and and then normal boot
OS X: What is Safe Boot, Safe Mode? -
After updating my iPod 4 and my iPhone 3gs to 5.1 it keeps turning itself off whenever I'm trying to load a larger web-page, or doing some hard operations. Is there anything I can do to fix this?
Have yu tried the standard fixes:
- Reset. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Restore from backup
- Restore to factory defaults/new iPod.
Maybe you are looking for
-
How do I turn off the requirement to enter my password everytime I delete a file in finder?
-
I was prompted to install an update this morning which I did. After that, Firefox will not open at all. I click the icon and nothing happens. I tried uninstalling it and then re-installing it with no results. == This happened == Every time Firefox op
-
Reinstall or Repair Elements 6
I open E6 in Edit and open 5 images. I go to create->photo collage. There is nothing in Theme or Layout. I have selected a size and changed the page # at the bottom and click Done. Nothing happens! What am I missing? In my original posting I inadvert
-
Deployment script not installing 10.1.53.64
Hi, I'm trying to script at startup a silent installation for Adobe Flash Player ActiveX 10.1.53.64. The script manages to successfully uninstall the older version, but then when it comes time to install the new version, it throws an error in the log
-
Query: creating client side handler
how can I create a client side handler for a webservice on weblogic 9.2 workshop