TS3694 after trying to update itunes I got an error MJVCR80.dll Does Apple have a fix for this?
After trying to update itunes, I got an MJVCR80.dll error,
does anyone know how to fix this?
See Troubleshooting issues with iTunes for Windows updates.
tt2
Similar Messages
-
When I tried to update Itunes I got an error message telling me to reinstall. When I try to reinstall I get a message "Apple Mobile Devide failed to start. Verify you have sufficient privliges to start syem services" I'm not sure what this means, can anyone help here? Thanks,
I tried the temp fix you mentioned, it didn't work. I could not delete all of the old itunes files, the uninstallers would crash half way through and if I tried to manually delete anything it also gave me an error, so reinstalling the older version would not work.
Frankly, this whole thing has got me ****** off. judging by the amount of complaints here, there must be a lot of people having this problem, yet Apple has let it go on for almost 2 weeks. What kind of inept coders are they employing if they can let an update that completely frags their software get through QA.
Does anyone know of any programs that will play itunes music files? I am just about done dealing with iTunes, but I've got a ton of music that I don't want to have to purchase all over again. -
This site doesn't seem to get answers. I typed the problem above, then it asks same question before post. What help is that? Needs to be clearer what it wants from me. Others seem to have same issues with iDVD's clarity of information. I have been editing for 12+ years and still can't figure out solutions more than trail and error.
Hi
1:40 - can mean 1 sec 40 frames - or - 1 minute 40 seconds - or - 1 hour 40 minutes
1 hour 40 minutes is 100 minutes and iDVD only cares about duration
• Pro Quality encoding - up to 120 minutes (movie + menu) (menu can be 15 minutes or even more
• Best Performances - up to 60 min. - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) up to 120 min. - slightly lower quality than above
Reg "Multiplex Error" - This is a tough one and can have a lot of reasons. Read on
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W -
Does apple have a fix for loss of iphone usb tethering following itunes upgrade?
Has apple or someone produced a software patch to fix the loss of iPhone usb tethering following itunes software upgrade?
1. Now about looking at the detailed usage summary online, you can not go by it to see the exalt date/time stamp of the data usage. Because, by design the cell towers will collect and store certain data usage for up to a six-hours period. After the six-hour period, then the cell towers will release the stored data usage to the company's servers. And at that time, the collected data usage will be recorded on your detailed usage summary online. For a long time, I brainwork that I had caught Verizon with their hand in the cookie jar for say. Because I knew that we were not using data usage at these odd-ball hours of the night or day. Yet, now I have learn that this is just not the case.
2. Here is a web site that may help you at http://www.iphonehacks.com/2014/09/fix-ios-8-wifi-problems.html ..... -
After updating the software on my I phone 4s it downloaded my entire i tune library to my phone. I have tried everything to correct this problem with no results. Does anyone have a fix for this. I do not want the entire lirary of music on my phone
BINGO! Thanks very much. Now I have to figure out why my video capabilities have disappeared
-
After a previous Adobe update, all of my desktop icons turned into Adobe icons. I'm not sure how it happened - I just looked away from my computer for a second and when I looked back, there they were!
Does Adobe have a 'fix' for this problem? I have had to uninstall Adobe in order to use my other programs, but I teach and I use Adobe documents quite often, so now I can't open those.Try some of the solutions here ---> Application, file icons change to Acrobat/Reader icon
-
Msvcr80.dll after trying to update itunes how do i fix?
After trying to update itunes I keep getting the message 'msvcr80.dll is missiing'.
What do I need to do to fix this?Click here and follow the instructions.
(98896) -
When trying to open ITunes, I got an error message of msvcr80.dll can not be found.
Assuming that it was an iTunes file, I reinstalled iTunes.
Trying to open again, I got an error message of an appication is trying to open a library file incorrectly.
How do I resolve this problem.
Neither my PC with Vista nor my my laptop with windows 7 will work?
ThanksHello Msvcr80.dll,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Best of luck,
Mario -
Just last 2 days started getting an APS Daemon.exe-System Error saying my MSVCR80.dll file is missing when booting up my PC with Windows 7. I tried to reinstall itunes, but got another error message. Anyone having this problem or know how to fix it?
I now see the message from tt2 and will try that. Thanks!Read this:
MSVCR80.dll missing, cannot install iTunes -
Tried to update ITunes, but keep getting error: Service "Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services."
So how do I get my ITunes back?Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
When I tried to update Itunes I get an error message that MSVCR80.dll is not available? How can I fix this? I am unable to update my iphone and Ipod. I can not open Itunes.
Click here and follow the instructions. If they don't work, perform a complete reinstallation (Windows XP, Windows Vista and newer).
(98954) -
Tried to update iTunes, then ran into errors. Windows error 126 / error 7 when I try to reinstall iTunes. Anyone help?
Me too. I read some instructions to reinstall, and delete all folders associated with Apple. Worried I will delete my library and backup.
-
I just updated itune and getting an error mscvr80,dll missing. I uninstall and reinstall and getting the same message. help
DLL files typically do not affect Mac OS X systems. Are you sure you are running Mac OS X? If you are running some version of iTunes Windows, the forum for that is here:
https://discussions.apple.com/community/itunes/itunes_for_windows -
After downloading IOS5, i can't access my itune and receive the following message "The Folder "Itune" is on locked disk or you do not have write permissions for this folder", noting that i access this folder in a normal way. Any clue ?
In my case its a new computer the old one was stolen and the time machine disk did not work for a restore but did for copying the info to the new mac
-
updated to new 2014 cc. In bridge when I go to tools/Photoshop/Image Processor....I get this message "adobe photoshop 2014 CC has quit working" Anyone have a fix for this??
I use a windows 7 pro and have no problem like that from bridge cc when I select a thumbnail then use menu Tools>Photoshop>Image Processor.. I see Adobe Photoshop CC 2014 start up then I see the Image processor dialog and that one file is selected in the bridge I the complete the dialog and click run. The image files are created. Photoshop remains open after the image files are create with no open documents. I need to click on the bridge in the task bar to bring bridge back into focus.
What does you system configuration?
Maybe you are looking for
-
Next button not working properly?
Hi, I'm new to the user groups, and only an occasional user of Captivate. I'm building an e-learning course, and I have inserted next buttons on each page to let the user control navigation. However, the slides still auto play without clicking next
-
How to get value with two parameter fro sharepoint list in SSRS reporting
Hi I am using Sharepoint list and fetching data in SSRS. Using three parameter as Department,Section and subsection. with filter everything working fine,but if i use category All and Sub category all for particular department,unable to get record. p
-
Why admin user cannot create Business Rules ?
Hi All, Why admin user can't create Business Rules. We've to create other userID and give the required roles and then we create Busines rules right ? Pls. advice
-
I think there is a big error of i phones. For example when i change the name of my girlfriend from Özlem to Merve. The place of Merve still located it '' Ö '' characters. You can understand it in pictures. İ think it is an error of iphones. And I m w
-
Hi All, we have implemted OSA and LSO integration through Free enhancement - AH-ADD_COURSE_FROM_LSO. We have a requirement to customise this badi . Can any one please let me know which badi will help us to modfiy the standard program logic.(how to fi