TS3694 Can't update iOS7 to Iphone 4 with error code 3004

Hi Support,
I can't upgrade my iphone 4 OS to iOS7. Please advise what error code 3004 means.
Regards,
Alex Man

From the article that the question was posted from:
Network connection or download errors
Errors 3000-3999 (3004, 3013, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes can't contact the update server (gs.apple.com)  on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software isn't interfering with ports 80 or 443 or with the server gs.apple.com.
Follow these steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (go to "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you're using a proxy, try again without using a proxy.
Test restoring while connected to a known-good network.
Error 3004: If you're using a Mac, you may be able to resolve an error 3004 by quitting iTunes and using the following command in the command line: dscacheutil -flushcache.

Similar Messages

  • Help me with error code 3004

    how do you downgrade an iphone 4 ios 7 to ios 6
    and get pased error code 3004 or "this divice is not elegable"

    I can't help Jessica, but I can relate. I'm having the same problem, same error message with Vista.

  • Exchange 2010 Sp2 update rollup 7 fails with error code 80070643 on Sbs 2011

    Hello Everyone,
    When i trie to install rollup 7 voor exchange 2010 sp2 (sbs 2011) it gives me error code 80070643. I cannot find much to solve this problem. Update rollup 8 installs fine. I've read on internet that every rollup must be installed to succesfully install exchange
    2010 sp3. Can anyone help me with this error?

    I just installed exchange 2010 sp3, but it does not finish. It stops at 'client access role'
    This is in the log;
    [10-08-2014 21:55:24.0121] [2] Active Directory session settings for 'Start-SetupProcess' are: View Entire Forest: 'True', Configuration Domain Controller: 'server.company.com', Preferred Global Catalog: 'server.company.com', Preferred Domain Controllers:
    '{ server.company.com }'
    [10-08-2014 21:55:24.0121] [2] Beginning processing Start-SetupProcess -Name:'iisreset' -Args:'/noforce /timeout:120'
    [10-08-2014 21:55:24.0137] [2] Starting: iisreset with arguments: /noforce /timeout:120
    [10-08-2014 21:55:31.0640] [2] Process standard output: Attempting stop...
    Internet services successfully stopped
    Attempting start...
    Restart attempt failed.
    The IIS Admin Service or the World Wide Web Publishing Service, or a service dependent on them failed to start.  The service, or dependent services, may had an error during its startup or may be disabled.
    Process standard error:
    [10-08-2014 21:55:31.0640] [2] [ERROR] Unexpected Error
    [10-08-2014 21:55:31.0640] [2] [ERROR] Process execution failed with exit code 1062.
    [10-08-2014 21:55:31.0640] [2] Ending processing Start-SetupProcess
    [10-08-2014 21:55:31.0640] [1] The following 1 error(s) occurred during task execution:
    [10-08-2014 21:55:31.0640] [1] 0.  ErrorRecord: Process execution failed with exit code 1062.
    [10-08-2014 21:55:31.0640] [1] 0.  ErrorRecord: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code 1062.
    [10-08-2014 21:55:31.0640] [1] [ERROR] The following error was generated when "$error.Clear();
        Start-SetupProcess -Name "iisreset" -Args "/noforce /timeout:120"
    " was run: "Process execution failed with exit code 1062.".
    [10-08-2014 21:55:31.0640] [1] [ERROR] Process execution failed with exit code 1062.
    [10-08-2014 21:55:31.0640] [1] [ERROR-REFERENCE] Id=ClientAccessServiceControl___ef7fa14362774cd9af8882d6287b640a Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
    [10-08-2014 21:55:31.0640] [1] Setup is stopping now because of one or more critical errors.
    [10-08-2014 21:55:31.0640] [1] Finished executing component tasks.
    [10-08-2014 21:55:31.0672] [1] Ending processing Install-ClientAccessRole
    Anyone has any ideas?

  • I have downloaded the Photoshop trial in CC when it gets to the updating stage it fails with error code 49

    It told me to retry or contact support - I have retried several times & it keeps coming back to error code (49)

    Generally, this error is caused by something running on the computer which may be locking files that are trying to be updated. First, try simply restarting the computer to close running applications and unlock all files. If that does not allow the update to complete, try disabling all applications which run in the background. Disable startup items, services | Windows or Start in Safe Boot mode | Mac OS X

  • Can't update CC:Installation failed. Error Code: U44M1P7

    This is the error message I get when trying to update CC:
    DPS Desktop Tools CS6 26.0.0 Update
    Installation failed. Error Code:  U44M1P7
    What's going on?

    Ok, I have now checked the log file according to the specifications in the troubleshoot section. The solution suggested in the error section of the log file was first to uninstall and then reinstall Photoshop. I then tried that. Bummer. BIG mistake. Now I don't have ANY version of Photoshop installed, because the Adobe Application Manager will not download and install Photoshop again because it stubbornly insist that my installation of Photoshop (which I do NOT have anymore as I uninstalled it) is up to date.
    So... now I have two paid-for versions of Photoshop. One, which is part of a Creative Suite Master Collection and the one from my Creative Cloud membership. But none of them on my MacBookPro anymore. How should I proceed from here? Reinstall the old Creative Suite paid-for-and-owned-version and cancel the Creative Cloud subscription, or...?

  • How can i update my new iphone with the data from my old iphone?

    I recently bought an iphone 3GS after my iphone 4 was stolen but when i try to sync the new phone it says the software is out of date. (when i was telling the guy at the apple store about my phone being stolen he said when you get a new phone just sync it to retrieve all the information stored on there. Is there any way i can retrieve the stuff from my old phone? I would like my messages, notes and apps from my old phone on my new one.

    Just to make sure - You're saying you had backed up your iPhone 4. When you plug in the 3GS, and try to "restore" the data from the iPhone 4 backup onto the 3GS, you get that error? Check to see if the iOS version is up-to-date, and hopefully it isn't. It might also be because your iPhone 4 wasn't, and is causing some sort of problem.
    Good luck!

  • TS3694 I TRIED TO RESTORE MY IPHONE AND ERROR CODE 1015 SHOWS WHAT DO I DO

    i tried to restore my iphone 3g but error message 1015 shows up,what do i do

    From the article that the question was posted from:
    Errors related to downgrading iOS
    The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed.   Installing an older version of iOS over a newer version is not supported.
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

  • TS3694 updating ios7 my iphone 4s has gone into restore mode and asking me to plug into itunes, im then getting an 3004 error. i have not been able to use my phone since doing this. can anyone help ?

    updating ios7 my iphone 4s has gone into restore mode and asking me to plug into itunes, im then getting an 3004 error. i have not been able to use my phone since doing this. can anyone help ?

    http://lmgtfy.com/?q=iPhone+error+code+3004

  • HT201210 I am trying to update Ios7 for iPhone 4 but there is an unknown error occurred like (-23). My Laptop OS is Windows 8. Now how can i solved this query.

    Dear Sir/Madam
    I am trying to update Ios7 for iPhone 4 but there is an unknown error occurred like (-23). My Laptop OS is Windows 08.ios 7 update which can updated and remaining  30minutes are left out. Than after error which can be show as i have mentioned above.
    How can i resolved this error? So please help me.
    Thanks & Regards,
    Vatsal Desai

    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process. Use the steps to troubleshoot security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See the steps under the heading "Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store." If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
    all of this from
    iTunes: Specific update-and-restore error messages and advanced troubleshooting

  • HT201210 what is the 'other' section of storage on my iPhone?  I can't update iOS7 due to lack of storage!!  And I have deleted almost everything.

    I can't update iOS7 due to lack of space for the upgrade.  I have hardly any songs, apps and pictures yet there is this 'other' storage which is over 4GB.  What is it and how can I reduce it?

    Thanks, I ended up just going to Apple and returning it and upgrading to a 16GB Iphone and just paying the price diffence. They had no problem doing that. So, for $100 plus 10% restocking, I got a brand new, double the capacity, Iphone.

  • TS3694 My iPad2 has repeatedly refused to update to iOS7, whether connected to a PC or not.  The error message indicates an unknown error has occurred, with error code 6.  Does anyone have any idea what the problem might be and how to solve it?  Many than

    My iPad2 has repeatedly refused to update to iOS7, whether connected to a PC or not.  The error message indicates an unknown error has occurred, with error code 6.  Does anyone have any idea what the problem might be and how to solve it?  Many thanks.

    Hi
    I followed this guy's instructions and it worked:
    http://evsiphone.blogspot.com/2009/05/iphone-iphone-could-not-be-restored.html
    I did disable the security (AVG and Zone Alarm) when I tried on my own PC. My wife's laptop which eventually got it working also uses AVG and Zone Alarm but on an XP O/S whereas my PC is Vista - maybe this is why.
    Cheers for you help.
    Andy
    Message was edited by: bigbadandy

  • HT201328 Can I Update ios7 In My Carrier Unlocked iPhone  ?

    Can I Update ios7 In My Carrier Unlocked iPhone  ?

    When iOS 7 is launched, you will be able to upgrade, as iOS 7 will be supported on iPhone 4 and newer. Open Settings > General > Software Update, and you will be able to install it when launched.
    iOS updates are launched by Apple and they don't depend on the carrier or device like Android, so iOS 7 will probably be released for all devices at the same time. It will be launched in fall

  • How can I update backup of iPhone at iCloud without wifi?

    Hi Expert, Can anyone suggest how can I update backup of iPhone at iCloud without wifi? Wifi stopped working on my 4s after upgrade to iOS7. I have iTune backup but want to update at iCloud. Any suggestion? Thanks in advance.

    You can't. iCloud backups can only be done over wifi.
    ~Lyssa

  • Can not update ios7 itunes has detected an ipad in recovery mode. why is this happening

    can not update ios7, itunes has detected ad ipad in recovery mode. why is this happening, it appears that apples answer to everyhing is to perfrom a factory reset...

    Please see: http://support.apple.com/kb/HT1808 for assistance with this issue.
    Regards,
    Steve

  • HT4623 how can I update a new iphone 5?

    How can I update my new iphone 5 with the iOS 6.1.3

    Settings > General > Software Update.
    This might be of interest:
    iPhone User Guide  (it is also already bookmarked in your iPhone's Safari.)

Maybe you are looking for