TS3694 download error message in itunes, error 9006

i am trying to download a purchased movie.  it downloads to about 375 mb's then shows a error message 9006 and the download stops.  how can i resolve this issue?

Did. you already check this discussion?
https://discussions.apple.com/thread/3814421?tstart=0

Similar Messages

  • When I connect my new ipod nano to my laptop (using windows)I get an error message saying "itunes.exe - entry point not found" I cannot access my itunes , or download a new version. Any ideas what to do or what is causing this?

    I have been given a new ipod nano to replace my much loved but old ipod. When I plug it into my laptop to sync it I get an error message stating "itunes.exe - entry point not found. The procedure entry point AVCFAAssetCreateWithByteStreanAndOptions could not be located in the dynamic link library
    AVFoundationCF.dll" I cannot acces my itunes or download a new versiona as this keeps flashing up. Any ideas? Please help, my life is meaningless without my music!!

    Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?

  • Hello Vivek here, i was trying to download apps from itunes and i could get the error message as itunes currently not available for past 2 days

    Hello Vivek here, i was trying to download apps from itunes and i could get the error message as itunes currently not available for past 2 days, is there any problem ideally or, please leave a reply
    <Email Edited By Host>

    Hi vivekanandanganesan,
    Thanks for using Apple Support Communities.  This article has some steps you can try if you are unable to connect to the iTunes Store:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Cheers,
    - Ari

  • Trying to download iTunes on my husband's windows vista laptop and we keep getting error messages that say error z, apple application support was not found, windows error 2. Tried 2 different browsers and it still would not work. Can you help? Thank you.

    Trying to download iTunes on my husband' s windows vista laptop. Have tried 2 different browsers and it almost finishes the download process and we get error messages that say "error z, apple application was not found, windows error 2" Can you help? Thank you.

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • My purchases show partially downloaded. When I attempt to resume the download I recieve an error message " an unknown error occurred -50" Itunes has charged for the download and sent a reciept however the shows wont play?

    My Purchases show partially downloaded. When I attempt to resume the download I recieve an error message: "an unknown error occurred -50". I tunes has charged for the download and sent a reciept however the shows wont play?

    I had the same problem so (assuming under the Purchased items in the Store you have a song stuck at 'Downloading'):
    I went to Music, then Artists.
    From there I chose the album.
    The song that failed to download had the cloud symbol next to it.
    I clicked the cloud symbol and the song completed the download for me.
    (Please note this was in iTunes for Windows - I expect it to be similar in iTunes for Apple)
    Message was edited by: UbergeekRFC - parenthetical note added
    Message was edited by: UbergeekRFC - added note about song stuck as downloading

  • Disconnected my iphone after software upgrade but while photos and my movies were still downloading. Now I get an error message that iTunes can't connect to the phone. How do I solve this?

    Disconnected my iphone after software upgrade but while photos and my movies were still downloading. Now I get an error message that iTunes can't connect to the phone. How do I solve this? I am using a PC and have version 4.3.4 on my iphone 4.

    In order to use ''nxm://'' links, Nexus Mod Manager must be installed and associated with the ''nxm'' protocol.
    * http://www.nexusmods.com/skyrim/mods/modmanager/
    In case of problems with this third-party program, please refer to its support forum:
    * http://forums.nexusmods.com/index.php?/forum/1413-nmm-code-development-chat

  • TS3212 itunes starts download, goes thru most of the way then stops with error message the Itunes could not be configured and won't finish downloading and installing

    itunes wont completly download and install. it starts downloading goes thru most of the download then a pop up error message says itunes couldnt be configured and tells me to press finish and it closes
    how do i get itunes to completely install??

    a pop up error message says itunes couldnt be configured
    I'd like to have a closer look at that error message please.
    Generate the error message again. While the error message box is open, hold down the Alt key and hit the PrtSc key. Paste the screenshot into an image file (using a program like Paint), and save the file.
    Start a reply here and click the wee camera icon at the top of the reply window. Click "Choose file", browse to the image file, select the file and click "Open". Now click "Insert file" to insert the screenshot into the reply.

  • I have 3 songs that will not download and the volume of error messages from Itunes about these "3" is annoying. I know my way around Itunes but cannot find a way to delete them and stop these Itunes download error messages.

    I have 3 songs that will not download and the volume of error messages from Itunes about these "3" is annoying. I know my way around Itunes but cannot find a way to delete them and stop these Itunes download error messages.
    Thank you.

    Thanks Mohammad - much appreciated.
    I also got a response from Apple who said that there was a problem related to fonts and the encryption.xml file
    Once we'd removed this we were able to upload the epub no problem.
    It's odd that the system seems to say that all is okay when it isn't. We have to rely on guesswork rather a lot using iBook Producer.
    Anyway, all sorted now and thank you again for your contribution.
    Best wishes and a Happy New Year!
    Sue

  • I want to Sync my iPhone 4 to iTunes however I get an error message from iTunes each time I connect the phone to the PC saying that I should restore to factory settings. Frustrating because it's already annoying enough that I can't drag and drop mp3's!!!

    I have never been so frustrated before in my life with any phone. I find it obnoxious as it is that I cannot simply drag and drop files (especially MP3's) straight from my PC directly into my phone, which I have been used to doing up until now. Everyone who convinced me to get the iPhone has instructed me that my frustration can be fixed by downloading iTunes and syncing it all up via that program (which I have never used before). So, I downloaded the program successfully, however when I connect the iPhone 4 to the PC and iTunes is open, I get an error message that 'iTunes cannot read the content of the iPhone "iPhone" and that I should go to the Preferences tab of the iPhone and select 'restore' to restore this phone to factory settings. First of all, I don't understand why I need to do that. I have already downloaded apps and other important things in the 2 days that I have the phone. I am also scared that it will erase my contacts. This is such a headache. Music is very imporatant to me, but I am getting so frustrated that I don't have freedom over the phone which I thought was supposed to be one of the best out there. I would really appreciate help in this matter. I am sure the phone is great but I am on the verge of taking it back and getting something else.

    Hey joshuafromisr,
    If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/HT1925
    or here:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    Best,
    David

  • Can anyone help me? The iTunes update corrupted my program. I uninstalled, and then reinstalled iTunes; only to find an error message about iTunes Helper. After several fruitless, repeat attempts, I am at a loss. Please help-

    Can anyone help me? The iTunes update corrupted my program. I uninstalled, and then reinstalled iTunes; only to find an error message about iTunes Helper. After several fruitless, repeat attempts, I am at a loss. Please help…

    Many thanks.
    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Cannot download apps to iPad since iOS 5.1 update.  Get error message "An unexpected error has occurred"

    cannot download apps to iPad since iOS 5.1 update.  Get error message "An unexpected error has occurred"

    Hi mike,
    Seems like a frustrating problem! Try restarting your device, and trying again. If that doesn't work, in settings, under store, tap your apple id at the bottom of the page, and then sign out. Sign back in again, and try again.
    Also, check you have enough remaining space on your iPad for the app you want to download, you can do this in settings, then general, then usage.
    I also reccomend buying the app in iTunes on your computer, and then syncing it to your device.
    Let me know how you get on, and I'll get back to you with further help if needed,
    Nathan

  • Ipod nano 4GB (error message in itunes)

    I receive an error message when itunes is up and my ipod nano is connected. The error message says: The file or directory\iPod-Control\iTunes\iTunesDB is Corrupt and Unreadable. Please run the Chkdsk Utility. Also, no music can be transferred to my ipod. At times a window pops-up saying: iTunesLibrary.itl cannot be read because it was created by a newer version of iTunes. I did download the latest version and still dosn't work!
    Can anyone help on the steps to solve this problem?
    Thanks!

    The only advice I can give it restore everything to it origninal setting and from your Itune snyc everything back in

  • Error messages with iTunes 11.0.1....

    I am getting a series of error messages with iTunes 11.0.1.... (-42076) & (-50) and cannot download any app updates...everything else seems to be fine.....
    anyone any ideas.......

    Mmmmmm how strange.... have just closed and reopened and problem seems to have cleared.....

  • And when i try to Re-install itunes i get a message from itunes ERROR 7 (windows error 1114), now how do i sort this out ???

    and when i try to Re-install itunes i get a message from itunes ERROR 7 (windows error 1114), now how do i sort this out ???

    Hey deepakmenonfrompune,
    Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following resource may help to resolve your issue:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
    Symptoms may include:
    "The program can't start because MSVCR80.dll is missing from your computer"
    "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
    "Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
    "Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    3. Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    1. Uninstall iTunes and all of its related components.
    2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
    3. Re-download and reinstall iTunes 11.1.4.
    Thanks,
    Matt M.

  • Error message: The iTunes Library file cannot be saved. An unknown error occurred (-54).

    I opened iTunes and downloaded 2 songs from http://www.reverbnation.com. Shortly after I started getting this error message: The iTunes Library file cannot be saved. An unknown error occurred (-54). Anyone dealt with this before?

    == Error -54 ==
    From an OS9 reference, error -54 is a software lock on a file or a permissions error. (Some of the old codes still apply to OSX although there is no formal list of OSX error codes.)
    First, try simply restarting your computer.
    iTunes Library cannot be saved (Error -54) - https://discussions.apple.com/thread/1912814

Maybe you are looking for

  • Get date between 1st of current year and 31st Dec of current year

    Hello: I have a query where there is a check on date that has to be between 1 jan curr year and 31 dec curr year. How can I have that since the year component will be changing from year to year?

  • Photoshop Album 2.0 Catalog problem

    I have been using Photoshop Album 2.0 on my old computer (Windows XP) for some time. My new computer is Vista 32bit. I have installed Album 2.0 on the new computer. I have used Easy Transfer to transfer the Photoshop Album Catalog to the new computer

  • SAP to 3rd party: EDI and XI: Needed advantages and disadvantages

    HI All, I have a requirement to sent PO data from SAP to 3rd party Vendors.(more than 30 vendors). Client insists on using EDI.!! I have completed the config on SAP R/3 side and IDOCS are created in SAP R/3. Since we have XI in the landscape, I have

  • Unable to connect to adobe servers on CC

    Hey I payed for CC a couple nights ago and have yet to be able to download and install any of the programs.  I have followed all the trouble shooting directions on the site but I still get the Download Error - Unable to reach Adobe servers. Please ch

  • TS3899 Having trouble getting email from my blue yonder account.

    ipad says searching for mail and then times out with error message, "server not working check settings". have checked settings and deleted account and re installed but still having trouble. Also tried power on off. Can send mail ok. Any help would be