TS3694 Error message "2001" when trying to restore an iPhone?

Can anyone tell me what error 2001 means, and what I can do about it? We're attempting to restore an iphone that got wet.

Also look here.
http://support.apple.com/kb/TS3694#error2001

Similar Messages

  • Loading the latest OS on my iPhone4 caused the phone to freeze. I get error message 4013 when trying to restore the phone. Any help will be appreciated

    Loading the latest OS on my Iphone 4 caused the phone to freeze and stop working. I get error message 4013 when trying to restore the phone.

    Did you already try these suggestions?
    Check USB connections
    Related errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    copied from Resolve specific iTunes update and restore errors

  • My iphone 3gs brings error message 1602 when trying to restore

    My iphone 3gs brings error message 1602 when trying to restore factory default

    See here  >        Check USB connections

  • Error message 3014 when trying to restore ipod touch

    error message 3014 when trying to restore ipod touch, i have tried everything, any suggestions?

    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.
    The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

    I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

    Did you already try these suggestions?
    Check USB connections
    Related errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    copied from Resolve specific iTunes update and restore errors

  • My iphone says an unknown error occurred (9) when trying to restore in iphone recovery mode

    my iphone says an unknown error occurred (9) when trying to restore in iphone recovery mode

    Hey there ejs11201,
    I see that you are getting an error code when attempting to restore your iPhone. Here is an article that addresses that specific code with some troubleshooting steps and will help you resolve the issue:
    Check your security software
    Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
    Get help with iOS update and restore errors - Apple Support
    https://support.apple.com/en-gb/TS3694
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • I get an error message (-54) when trying to sync my iphone 6 plus wiht itunes, how do I correct this?

    I get an error message (-54) when trying to sync my iPhone 6 plus with iTunes on a window based computer, how do I fix this?

    I actually meant to post this link in my other post and now see I didn't.
    http://docs.info.apple.com/article.html?artnum=304893
    It may be of no use if you're up to date with software.
    Google also throws up these.
    http://www.google.com/search?client=safari&rls=en-us&q=ipoderror48&ie=UTF-8&oe=UTF-8

  • Getting the error message 13019 when trying to sync my iphone. how can i correct this?

    how do i solve error message 13019 when trying to sync my iphone?

    I received the same error message after I had recently updated iTunes to 10.5.1 and I had wirelessly updated 13 apps.  I had to go into iTunes and select Apps, on the bottom right it said I needed to update 13 apps.  I updated the apps via iTunes and then synced again without an issue.
    iPhone 4S / OSX 10.6.8 / iTunes 10.5.1

  • TS3694 error code 3194 when trying to restore my ipad?

    error code 3194 when trying to restore my ipad?

    Hey bfcjamie,
    Thanks for the question. Error 3194 usually occurs when iTunes is unable to communicate with the update-and-restore server. The following articles may help to resolve your issue:
    iOS: Restore error 3194 or 'This device isn't eligible for the requested build'
    http://support.apple.com/kb/TS4451
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    1. Install the latest version of iTunes.
    2. Check security software and ensure that communication to gs.apple.com is allowed. Follow these steps for assistance with security software.
    3. Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow the advanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
    4. Try to restore from another known-good computer and network.
    5. If the errors persist on another computer, the device may need service.
    Thanks,
    Matt M.

  • Unknown Error Message (9) When trying to restore Ipad 1

    Hi, recently i purchased an iPad 1, and am having problems when trying to restore the device. I put it into restore mode as it was going to sync every app on itunes which i didn't want, so i had to try and set it up as a new ipad again. Now the ipad is in restore mode, when plugged in to my laptop, iTunes does not recognise the iPad until i put it into DFU mode, by holding down the home button and Power button simultaneously, then releasing the power button until the 'connect to itunes' symbols appears. iTunes then recognises the iPad in restore mode and asks me to restore it. When i click to restore, it always stalls just after the 'waiting for iPad' message appears on iTunes, then the error 'Could not restore Ipad, an unknown error occurred (9)' appears.
    I have tried downgrading my firmware and restoring my iPad to v3.2 but then the error 3194 appears. Also by trying to restore the firmware to the newest version using a downloaded firmware also returns this message. After some research on the matter, i read a few people claiming the problem is the USB ports. I have since tried restoring on another laptop and a PC, but still the error 9 message occurres, therefore suggesting it isn't a problem with the USB. My understanding it that it is either a problem with the iPad, or with the Firmware i have downloaded, and iTunes does not recognise this. As further information, the iPad is a first generation ipad which had the latest firmware updated on (v 5.2). It seems to be whenever i try to restore to a firmware i downloaded seperately, i get the error message 3194, and when i just click the restore button, and automatically updating to v5.2 i receive the error 9 message
    Any suggestions as to how i can fix this problem?
    Thanks

    i pulled this from another post on these forums.
    thy this:
    "First try to turn off your iPhone, with the sync cable not plugged in.
    Then hold down the home button (iPhone still off) and plug in the sync cable. (Keep holding the home button until iTunes pops up).
    You have now entered force recovery mode.
    Now try to update the iPhone, using iTunes, as instructed.
    That should work. "
    From: https://discussions.apple.com/thread/2668731?start=0&tstart=0

  • Get error message 1603 when trying to restore mini

    Hello,
    am getting error message 1603 while attempting to restore Ipod mini using latest version of iTunes.  Running Vista totally updated.

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
     Cheers, Tom

  • HT201210 I am getting an error message 3014 when trying to restore my iPad, help?

    I am getting an error message #3014 when I try to restore my ipad from the new itunes.  I also just downloaded and installed osx.  help?

    http://lmgtfy.com/?q=iPhone+error+code+2003

  • TS3694 I get an error 2001 when trying to restore my iphone 4 and it won't reset, what can I do?

    does anyone know how to restore an Iphone 4 to factory settings? I receive an error code 2001 and it won't restore ...now my I have a dead phone

    Also look here.
    http://support.apple.com/kb/TS3694#error2001

  • TS3694 I got error message 1015 when trying to restore settings on iphone 3g any suggestions?

    Can Anybody help me here?  I tried to update the operating system, via Itunes,  on my (second hand) iphone 3G and an error message came up.  I then tried to restore but to no avail.  I got another error message (1015).  I am now unable to use the phone at all.  Any suggestions would be greatly appreciated.

    I did search to try and find a solution.  As yet no luck.  Someone a little more technically minded might be more successful.  However, I haven't given up.

  • TS3694 I keep getting this error message 3194 when trying to restore my ipod. Pass code has me locked out and am trying to restore

    I am locked out by the pass code and am trying to restore, I keep getting this error message 3194 . PLEASE ADVISE !!!

    See:
    iOS: Restore error 3194 or 'This device isn't eligible for the requested build'
    How to Fix iTunes Error 3194?
    Fix Error 3194 from iTunes during iPhone restore

Maybe you are looking for

  • Private key from a file

    dear all I want to create rsa private key from .key file. I searched a lot but could not find a way to do so. how can i do that ???

  • IDOC error - Receiver of IDoc is its own logical system

    hi, i have a requiremnt to generate the IDOC for the same and same client. actually i have to get the data from application server and i have to generate the IDOC. for this i have created a Zreport and passed the data from application server to segme

  • CVD 1 % Higher education cess

    Dear all, We are having a problem in import purchase where in the 1% Higher education cess on CVD does not default during MIGO. As a result of which the system loads it on to the material during MIGO. Have done the following settings maintained in pr

  • How do I get an icon glossary.

    I have no idea what some of the icons mean.  Is there any way to get text instead of icons, and if not where do I get an icon glossary.

  • Using Levels in Aperture

    In photoshop you can use level adjustments to select a point in an image to be absolute black and another to be absolute white. Is this possible in Aperture? Thanks