TS3694 Fail to upgrade OS 4 to 6. Anyone can help ?
I had always encountered error -5000 while trying to upgrade the OS via iTune. I had tried numerous time and it's still the same error message..any help would be very much appreciated.
It can't be 4S for which initial shipment was iOS 5.0
Check here
http://support.apple.com/kb/ht3939
For error -5000
See http://support.apple.com/kb/TS3297
Similar Messages
-
When I launch my iTune 10.6.1 , it suggests an update to 10.6.3 . But when I click to update , it fails to detect any latest version . Anyone can help ? Thanks .
or download the standalone installer here:
http://www.apple.com/itunes/download/
Regards. -
After Upgrade of Iphone 4 to IOS7 i cannot restore from backup Anyone can help?
Have backuped up my iPhone 4 and then upgrade to IOS7.
Unfortunately have lost all the information since itunes is failing when trying to restore backup.
Anyone can help?http://support.apple.com/kb/ts2529
-
hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus
Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support. -
Hi i don't no if anyone can help me, i have a ipad 1 and have been trying to upgrade it to the latest version and cant find anywhere. on my phone it is in the settings to upgrade, iv been online and looked but cant find any link. can someone send me a link or direct me the right way many thanks.
Upgrading the iOS "over-the-air" was introduced with iOS 5. If you are currently running an iOS version < 5.0 you can only update through iTunes. Connect your iPad to your PC or Mac. Open iTunes and click on "Check for updates"
-
I tried to download a book I bought but failed. The error message contains "The operation couldn't be completed. (Product Integrity error 9918)". Anyone can help?
If this is something you attempted to purchase and download through the iTunes store, then contact iTunes support. http://www.apple.com/emea/support/itunes/contact.html
-
I need to upgrade to mac os snow leopard from 10.5.8, and have the lion OS usb. I can't upgrade to snow leopard as my father doesn't remember the admin password. If anyone can help it would be appreciated
Restart with the Mac OS X 10.6 DVD in the drive or with the Lion USB drive connected, hold down the Option key just after the restart, tab to the installation disk, and press Enter. If the computer has a firmware password set, it needs to be provided for this to work.
(66822) -
Hi,recently bought an apple tv to connect to my macbook,which is recently been upgraded to os x mountain lion version10.8.4.But i can't connect to that with my apple tv.Anyone can help me ????
not all macs support airplay mirror
http://support.apple.com/kb/ht5404
installing mtn lion is not! enough if your video card does not support it then you need to live without mirror or take your chances with airparrot -
Hi, my iphone could not be activated after upgrade it from IOS4 to IOS6, it shows that is due to activation server is unavailable and no sim card in the iphone. Anyone can help me please?
It is 99% hacked/jailbroken iPhone to use a different carrier than intended. You have to put the sim from the original carrier or ask them to unlock the iPhone. We as well as Apple cannot help you with this.
-
Tried to use iphone connecting to wifi but failed dispite password correct, cable connection ok, and even reset network setting in iphone. Anyone can help?
Kin ChiI get in now with the following procedures taken:
1. Reset network as suggested in Apple app.
2. In the wifi connection, instead click in the user name as shown in the screen, I click Others and re-type the user name as appeared before. In the security, instead of none, I click WEP. It will then prompt you to put in password. I then put in password as I know for that user name again.
Then, it joined the wifi..
Hope this can help someone who get this problem.
Kin Chi -
Since I upgraded to iTunes 10.7, I can no longer sync my iPhones nor my iPad.
For all devices, iTunes says "could not back up ... because a session could not be started".
I'm on w7x64, updated.
I have already tried to re-install, reboot, stop/restart Apple mobile devices service, without success.
Thanks!I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
I hope this helps you and any other users. -
Done several option for my freezing Macbook Air but still fail. Anyone can Help me?
Hi there..My MacbokAir freeze when login. Only display apple icon and spinning wheel. ok..dis some cronology why m yMBA freeze for da 2nd time.
I’m using da mobile USB broadband. My MBA shutdown coz forgot to turn on da power. Then power’s on. Log in normally but it’s become to slow/stuck somewhere. So i restart then can’t log in.
1st time i ask my friend to hav a look then he said need to format. so i fromat it to OS 10.6.7. and now da same problem repeat for the 2nd time just for a few week only. So i wanna do it myself.
I’ve done the: 1)safe mode fail(can’t enter). 2)go to disk utility(Hold C key) then repair permission stated this statement...
Warning: SUID file “System/Library/CoreService/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAge nt”has been modified and will not be repaired.
Dunno what is it and just repair the disk and i restart, still fail. And i try 3)reset da NVRAM (COMMAND OPTION P R)..also fail. Then I try 4)reset the system management controller-SMC (shift-ctrl-opt)+power key,also fail.
Can anyone here help me what to do. Coz it’s was 2nd time i’ve got da same prob. And i believe dat if i format again, then da same problem will come again.
My MBA detail: year 2009/10, 13.3 inch, 1.86GHz intel core 2 duo(6Mb shared level 2 cache), 2GB DDR3 SDRAM, 120Gb HD,got partition for window 7 (window7 working properly).
Please help me..ur help is most appreciated.TQLooks like you have created a nice mess.
Make an appointment with your local Apple Store or AASP while the machine is still covered by warranty and they can help bail you out.
Regarding the Repair Disk statement you received please read Disk Utility's Repair Disk Permissions messages that you can safely ignore
BTW: Please don't use slang such a coz, da, ur etc. it's not cute and makes your post more difficult to read and understand.
Roger -
HI after i upgrade to new Os x Mavericks i found that i cant open my WINDOWS in my BOOTCAMP, its always appear asking me to windows running or not well shut down properly message, after i try to go to RUNNING WINDOWS NORMALLY it stil cant open and auto open and running on MAC. anyone please help me. Thank you
Ok this worked to solve the error.
Use cmd prompt in windows 7 or 8 and run as admin:
sc config lanmanworkstation depend= bowser/mrxsmb10/nsi
sc config mrxsmb20 start= disabled
No need for all that power shell nonsense as shown elsewhere for windows 8.
That's it. Also force smb2 disabling on the apple side for good measure.
With the above I was able to network mavericks and windows 8.1 pro flawlessly. He issues I had before where I could not read video, ISO and audio files (but could open documents and pictures from the windows machine connected to an apple network share folder went away. -
I downloaded IOS 8 and I cloud drive has been upgrading for 2 days anyone can help me
I Downloaded IOS 8 and the I cloud drive has been upgrading for two days can anyone help
Hi there,
You may want to take a look at some of the troubleshooting steps found in the article below.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
-Griff W. -
Hi,my problem is call failed. anyone can help me.
I have problem in outgoing calls. when i call to any number it show to me call failed.
Try resetting network settings. Go to Settings> General > Reset and choose Reset Network Settings. Then test a call again.
Maybe you are looking for
-
How to track down duplicates record in BPC 5.1
All, We had a consultant who builds up a script which pulled all the data files from different sources and finally load in SAP BPC. We are seeing duplicates in our SAP BPC for excel reports. We looked at couple of tables at SQL level and eve
-
Complex Query which needs tuning
Hello : I have a complex query that needs to be tuned. I have little experience in tuning the sql and hence taking the help of your guys. The Query is as given below: Database version 11g SELECT DISTINCT P.RESPONSIBILITY, P.PRODUCT_MAJOR, P.PRODUCT_M
-
[PLEASE HELP] How to get Microsoft Outlook Rules to work on my Z10
Hi, My organization recently started deploying Z10 for work. We use Mircosoft Outlook 2010 and I receive many e-mails throughout the day that I filter by setting up rules. These Outlook rules do not seem to transferr over to my Z10 e-mail account a
-
CreateEntityManagerFactory throws NullPointerException for ejb3 jse client
This question has been posted to the Toplink/jpa forum without any reply. Dear experts! I am trying to create a java standard edition client, to test outside the weblogic server, my ejb 3 entities, declared as shown in the following persistence.xml.
-
I can retrieve my voice mail the indicator icon does not appear on my screen. Also, I just changed my profile setup to vibrate and make a noice when I have a voicemail. Just tested and nothing happened. Please help