TS3694 getting error 3004 when trying to update to ios7

I keep getting error 3004 when trying to update to ios7

I was trying to update my iphone 5 to IOS7 and couldnt do it for 5 times then I did the following and was able to update it right away
Clearing your DNS cache may resolve the issue and enable you to connect to the iTunes Store.
The easiest way to clear your DNS cache is to shut down your computer completely and then restart. If you can't shut down, you can clear your DNS cache manually.
Click Start and choose Run.
In the dialog that appears, type “cmd” (don’t type the quotes) and click OK.
After the DOS prompt (C:\), type “ipconfig /flushdns” (without the quotes) and press Enter. Make sure you enter a single blank space after “ipconfig.”
Let me know if it solved the issue for you

Similar Messages

  • HT201210 keep getting error 3194 when trying to update ,what is this

    keep getting error 3194 when trying to update,what is this

    error code 3194 http://support.apple.com/kb/TS3694  Do you have the lastest version of iTunes? if not update.

  • I keep getting Error 17 when trying to update to 7.0.4 iPad Air

    I keep getting Error 17 when trying to update to 7.0.4 and the Ipad stays in USB Mode

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
     Cheers, Tom
    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
    Message was edited by: Texas Mac Man

  • Keep getting error 4002 when trying to update Genius

    I haven't seen anyone write about getting error 4002 when trying to update genius in itunes. I select update genius and it gathers information and sends it to the itunes store I assume. And then waits a few seconds and then I get the following message "Genius results can't be updated right now. An unknown error occurred (4002) Please try again later." I've been getting this message for well over a month and I keep hoping they'll be an update or somehow it will magically be fixed, but nothing has changed. Anyone have any insight on this one?
    The current ituned library it 123GB and is stored on external drives. It should also be noted that when I first turned on genius when it was released it went through this whole problem without a hitch. I just can't update Genius with any of the music I've added since then. I can't even get genius to recognize music that I got from the itunes store since I've had the problem.

    Be careful - this was a disaster for me. Once I did this, I got a different error - an error 4010 and in trying to recover, caused a lot of library issues that forced me to go to a backup to fix. You'll find a lot of people having the 4010 problem. Basically iTunes Genius is a disaster and Apple isn't fixing it.

  • Why do i get error 43 when trying to update iphone3

    why do i keep getting error 43 when trying to update iphone3? very frustrating please help!

    If you back up your device manually before syncing, you can restore it from that backup again. A manual backup does not include the sync process.
    To backup manually do this:
    Connect your iPod to your computer and right click on it in the device list and choose backup. iTunes will backup your iPod without syncing.
    Transfer your purchases the same way, choosing "transfer purchases" this time.
    When you connect your iPod let iTunes erase all media content and  restore your settings and app data from your manual backup afterwards.

  • HT201210 keep getting error message when trying to update iOS to 5.1.1

    I have had no trouble updating the several iPads under my charge at work, however can't update my own.  Am using iOS 5.1 currently on original iPad.  I go to settings and it looks for any updates available and I click install to 5.1.1 but keep getting error message saying there was an error when trying to update.  I am on my home wifi on my iPad.  Have done same procedure with about 5 other iPads with no trouble. What can I do?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."

  • IPhone 5 stuck in recovery mode loop, get error 9 when trying to update to ios 7 help me

    so i have tried every way (except a different computer because that option is not available right now). i wanted to reset (factory reset erase all content) my iphone 5 because it was being really wierd. id be using an app all the sudden it would just turn off, try to restart itself, never get past apple logo screen, crash, attempt restart again etc. only when i would hold home and power button it would start up the right way. anyway i went into my iphones settings> general> reset> erase all content and settings. BIG MISTAKE!!!!!!!! ever since then it just have been stuck in recovery mode. the first time i tried to restore it. i got error 3914 i think. doing a little research i found i needed to update itunes so i did (11.1.5.5). then it said i needed to download iOS 7 so i did. and when i try to restore it, i get error 9. itunes is up to date. my windows is up to date. ive tried everything i can think of and im gettin to the point where im gona throe it at the wall
    SOMEONE PLEASE HELPME

    And you have done all include here?
    http://support.apple.com/kb/TS3125

  • I get error 2324 when trying to update itunes.  Suggestions?

    I get error code 2324 when trying to install the latest itunes.  Any suggestions?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • I keep getting error mess when trying to update iPod touch 4 gen to new ios7

    I keep trying to update my iPod touch 4th generation and I get an error message or I get a message saying iOS 6.1.3 is up to date but I want to get ios7

    You cannot update an iPod Touch 4th Gen to iOS 7....
    GB

  • Getting error message when trying to update to 10.6.8

    I'm trying to update a 10.6.7 computer to 10.6.8 But I get an error message everytime.
    The error messages read:The installation failed! The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.

    Use a maintenance utility like Yasu or Cocktail to prepare existing Mac OSX. Or for more depth read this article.
    http://reviews.cnet.com/8301-13727_7-20073070-263/preparing-for-the-os-x-10.6.8- update/
    http://reviews.cnet.com/8301-13727_7-10469635-263.html

  • Keep Getting Error 1053 when trying to update/reinstall itunes

    I tried to update Itunes and keep getting the same error message about Apple Mobile Device failing. I have tried to start/stop AMD without any luck. I have uninstalled multiple times and restarted multiple times. Just need help to get my Itunes restored.

    Hi there JonR0670,
    You may find the troubleshooting steps in the article below helpful.
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    -Griff W. 

  • Getting error 3194 when trying to update to iOS 5

    I am running iTunes 10.5 and am trying to update my iPhone 4 to iOS 5. The error im getting is 3194 which is defferent to everybodys 3200. Does anyone know why this may be or how I can overcome the error?
    Thanks in advance.
    Phil

    Phil,
    Same here, tried all the suggested steps in the 'more info' link but still gave the 3194.
    A quick search of iPhone 4 discussions suggested these steps (thanks MacMan TommyC)
    Do a HARD reset of the iPhone - holding the Lock/Power button and Home Buttons until the iPhone powers down and the Apple Logo reappears.
    Make sure that your Mac (I'm assuming) has all recent security and iTunes updates completed; Safari, too, made a diff here as well.
    Do a HARD reset on the computer as well.
    Launch ITunes FIRST then connect the IPhone to the USB again.
    Upon recognition, hopefully, ITunes will want to do the Update to iOS 5 for you, do its LOOOOONG back-up, and then install the update for you and then put everything back on.
    Also added the following to the host file, not sure if it actually helped but it was came up quite frequent on a Google search
    #74.208.10.249 gs.apple.com
    Hope the above helps

  • Get error 8018830f when trying to update my device

    Hello everyone!
    I develop Windows app as an hobby. I also try to learn the whole Windows ecosystem with C# as a base. I have bought myself a Nokia Lumia 520 and a Microsoft Surface RT first generation for the purpose of this developing. The OS on the Lumia 520 is now 8.10.14176.243.
    Now, when I try to update the phone, I get error 8018830f. I have done following:
    Let the phone reach 100% charge
    Reset the phone
    Double-checked that all accounts are correct and all dev. tools are installed
    Checked this forum
    Did an Internet search
    I have not found a solution for my device, the 520, but I found some interesting threads about the 900-series. Links will come.
    If anyone has a thought, please, share? =)

    Hey, please See this 
    http://www.microsoft.com/en-us/mobile/support/faq/?action=singleTopic&topic=FA143712
    If your phone was enrolled in the Windows Phone Developer Preview Program but was reset or otherwise removed from the program, the Lumia Denim update will not be available, or reports an error 8018830f. To recover this, first check your phone for any of the
    updates for the Developer Preview and then install the Lumia Denim update.
    You may also use the Software Recovery Tool to return your phone to the latest approved version of the software. You can download the tool at www.microsoft.com/mobile/support/recovery-tool.
    "Solution suggested is enrolling back to dev preview and updating to latest OS version available, after which you should be able to update to Lumia Denim, if it is available for your device. This sort of confirms that if you are on developers preview
    already and updated to latest version, you will get Lumia Denim automatically."
    -N
    Thanks N

  • Why do I keep getting error message when trying to update iPad with ios7?

    Keep getting error message ios7 won't validate? Can I reset iPad and download again? Will I lose data on iPad if reset?

    NMAYO,
    In your project view can you right click on the chassis in the cRIO and make sure that it is set for Scan Mode and not FPGA mode? Also, In the measurement and automation explorer you can check the cRIO and verify that it has Scan Engine Support installed on it. The tutorial below shows how to reformat a cRIO and install software on it, the later steps on software will allow you to check your cRIO.
    Reformatting a CompactRIO Real-Time Embedded Controller
    Ben Sisney
    FlexRIO V&V Engineer
    National Instruments

  • I keep getting error -3259 when trying to update my iPad to iOS 5, how do I fix this?

    I have tried everything! Updating my system, using system restore, turning off all my firewalls, updating all my security programs, uniinstalling iTunes, reinstalling iTunes, googling the answer and I can't seem to find anything to do with this specific error anywhere! What do I do?

    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    http://support.apple.com/kb/TS3694#error1

Maybe you are looking for

  • Can't choose cache folder in Bridge CS6 on a different drive/partition

    Hi, I just installed Photoshop CS6 and noticed a non-critical, but nevertheless annoying problem in Bridge (Platform: Win7 x64): When I try to relocate the cache folder (Menu: Edit -> Preferences -> Cache -> Location, then pressing the button "Choose

  • When does downloading begin for Manager.createPlayer

    when you make a call to the Manager.createPlayer method using a url and the parameter passed in, when does the video begin to download. Immediately? Or do you have to call realize first to begin the download, or even prefetch. I'm trying to put toget

  • How to use Parameterized Stored Procedure in OBIEE 10 g..?

    Hi All, In my rpd, to load the data in the Physical layer, I'm using a Stored Procedure (*SQL Server Stored Procedure*). This stored procedure is using some parameters, so my intention is 1) Provide prompts for each parameter 2) Allow the user to sel

  • Add custom properties...Please help

    Hello, I would appreciate if you please let me know how can I add custom properties to documents such that they are available to all the documents, which are added to a particular datasource/repository. I added one custom property to one document but

  • Leading Zeros are Dropped?

    I have a JavaScript question, and although this is a Java Forum, I'm sorry but I don't know where else to post this. I have a form where a user enters a 3-digit number. The code takes the number and increments it by 1 as long as the number entered is