TS3694 I am having a problem with updating and restoring my iPhone 5 , I received an unknown error (3004)

I am having a problem updating my iPhone 5, it keeps giving me a message stating that it was unable to restore my phone and the error is an unknown error (3004)

Hello Norm Baines,
Go through the section 5. Verify that the Apple Mobile Device USB Driver is installed from the link below
http://support.apple.com/kb/ts1538

Similar Messages

TS3694 I cant update and restore my i phone to tunes unknown error 1015 comes up and my phone is frozen , any advice , thank you.

Unable to update and restore my iphone to itunes, unknown error 1015 pops up and my iphone has frozen and unable to reset.

https://discussions.apple.com/message/15021399#15021399

Problems with updating and restoring iphone 4s

So yesterday my iphone 4s said there was an update available so I started to update it, but cancelled the update by holding the home and lock button because I wanted to update it later instead.
It then told me to connect to itunes and restore it so I did that.
After and during restoring the connect to itunes screen stayed there and when I connected it to itunes again after restoring it, it told me it was in recovery mode still and needed to be restored.
I just restored it again hoping it would work this time but the connect to itunes button was still there,
What do I do now? All my phone will show it connect to itunes

Connect to iTunes. You should probably try to enter recovery mode as described here. You may have to try this more than once to succeed. Let iTunes do the update.
http://support.apple.com/kb/HT1808

TS5376 I'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly.

'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?

Try Troubleshooting issues with iTunes for Windows updates.
tt2

I'm having a problem with coreaudiotoolbox and corevideo.dll.

I'm having a problem with coreaudiotoolbox and corevideo.dll. PC was corrupted, I restored. Now when I launch Safari, I run into errors, can't find these two dll files. Itunes won't download at all because it says something is missing but won't say what. Now what do I do? Apple won't help because they want $50 dollars just to talk with me and I've been down that road before and to no satisfaction. Help please!!

Taken at face value, you're having trouble with Apple Application Support program files there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept, so an AAS problem can affect both iTunes and Safari.)
Let's try something relatively simple first. Restart the PC. Now head into your Add or Remove programs control panel, select "Apple Application Support", click "Change" and then click Repair.
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post (although it's for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things):
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a window pops up saying that the prograam has encountered a problem and sh...

HT1386 I recently updated and restored my Iphone on a Mac. My music was erased, therefore, I am trying to sync all of the music from my computer into the iPhone, but it says that I need to use the original computer/itunes in order to sync, but it is the s

I recently updated and restored my Iphone on a Mac. My music was erased, therefore, I am trying to sync all of the music from my computer into the iPhone, but it says that I need to use the original computer/itunes in order to sync, but it is the same computer and iTunes account. The error reads: The iPhone, "Name" is synced with another iTunes library. Do you want to erase this iPhone and a sync with this iTunes library? If I click "Erase and Sync," will it delete my contacts, apps, etc?

The following may help: iOS: Device not recognized in iTunes for Windows

TS4242 since updating and restoring my iphone 3gs it no longer can find my sim itunes cant activate it because no sim inserted can anyone help

since updating and restoring my iphone 3gs it no longer can find my sim itunes cant activate it because no sim inserted can anyone help

That usually means the phone was hacked or jailbroken to unlock the phone and when you update the phone it locked back up again.
Only way to resolve this issue, is to find out who the orignal carrier was and have them unlock it. If you bought this from a 3rd party contact the seller and have him/her unlock it for you by contacting the phone carrier.

I have updated and restored my iphone and now it wont go bask the connect to itunes screen what do i do?

I have updated and restored my iphone and now it wont go bask the connect to itunes screen what do i do?

So what happens when you connect to iTunes?

Problems with updating Apple ID on iPhone and iPad

Hi! I had to change my email address, so I changed my Apple ID online, in iTunes, and on my iPhone 5 and iPad 2 (in the Store area). I am able to purchase/update Apps, etc on both devices. My problem is that both my iPhone and iPad still will get a random pop-up with my old Apple ID asking for my password. This happens pretty frequently. Thanks in advance!

Hi Friend,
While your idevices still having apps downloaded by the old Apple ID, Apple Store will ask you for the old Apple ID and password to updated them. But, if you delete all apps downloaded by the old Apple ID, then download again by the new Apple ID, Apple Store will not ask you anymore for the old one.
Hope it helps

Problems with updates and the App

Hi all
I'm new to the Creative Cloud, and while I'm enjoying all it has to offer I am having some problems. Every time I use the app to update any software, I can't 'update all' I have to update one, quit the app and then re-launch it to run the next software update. As you can imagine this is frustrating and time consuming.
Has anyone else had this problem, or is a common issue? Any advice or a point in the right direction would be welcome. I've done searches but havn't found what I'm looking for.
Many thanks.
Neil

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

I am having a problem with Java and Abode. Trying to play Pogo.

Every time I try and play Pogo I have a problem. It pops up with a message about Java. If I hit the button it says to activate add on's which I try and do and now it will not do anything. Is my problem with Firefox or pogo. It seems that most of the problem is abode because it pops up every where.

Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
Once you're there, the site will check if all your plugins have the latest versions.
If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

Anyone else having a Problem with Leopard and Photoshop CS3?

I'm using CS3 with Leopard 10.5.4 at work and there are some very aggravating anomalies, that I'd like to nail down to a cause. Most frequently, when switching from apps to P'Shop, the menu bar stays for the previous app, i.e. when going from Finder to P'shop, the menu bar still says Finder and has Finder options. Changing from Lightwave to P'Shop, the menu bar remains Lightwave.
Occasionally, an Adobe app - P'Shop or InDesign - will simply disappear and not come back. The icon in the dock shows it as active, but no amount of clicking, Command-Tabbing will reveal the app and I have to Force Quit, losing unsaved changes.
I have a feeling it's Leopard, since, I've used CS3 on Tiger and CS4 on Tiger and never had a problem.
I'm wondering if upgrading to the latest Leopard would make much of a difference.
Has anyone come across this and found any kind of answers?
Thanks for any suggestions.
-Vincent

> Just because it doesn't happen to Phil (who may not use all of the same features of the Suite that others do anyway) does NOT mean that these problems are not real and are not mere PEBCAK.
Right. If someone is having a problem associated with Tiger, it's PEBAK. If Leopard is involved, it's automatically because of Leopard. Apparently, with Apple's latest OS, trouble shooting problems are no longer necessary - just blame it on Leopard and call it a day.
b FUD
I find the dynamics here really interesting. This thread would have been very different if Vincent had posted with problems involving Tiger. Would have gone something like this:
After admonishing him for not providing more information about his setup by posting the obnoxious big blue link on how to ask questions (ahem - we know NOTHING about his machine or configuration, such as which machine, how much RAM, scratch disk or attached peripherals), there'd be all kinds of trouble shooting advice given - "try a new user", "repair permissions", "run DiskWarrior, and on and on ...
But no, since he mentions Leopard, none of that is apparently necessary and the completely, utterly
b irresponsible
advice is given ... "that's just the way Leopard is".
Those are some serious problems he's reporting that have nothing to do with Leopard. Something is obviously hosed!
As for discounting my experience because I don't use every app in the suite as extensively as I do Photoshop, I'm FAR more qualified to discuss Leopard and CS issues than Ann or Neil who do not use Leopard at all (and have never used it as far as I know.)
"Others have problems with it", is their battle cry but it's extremely weak. Do I really need to remind you all that these forum are ALWAYS filled with people who have problems, regardless of version or OS? You act as if this forum was a ghost town when Tiger and CS3 were current!
Gee, Ann ... people are STILL reporting problems with 10.5 and CS3? How shocking! Guess what - people are STILL reporting problems with 10.4 and CS3 too! Let me make a prediction - people will have problems with 10.8 and CS9!
Vincent-
> I don't really deal with fonts anyway ...
Yes. You do. Even if you never type a single line of text, every application uses fonts to create menus and other GUI items. If one of those fonts are bad, it can create all kinds of problems, including the very problems you mention.
The fact that you don't seem aware of this and you're still using 10.5.4 leads me to believe you're not familiar with the basic practices of maintaining a healthy system. Again, how did you install Leopard on that machine?
Look, if you're simply trying to justify using CS4, go right ahead. It's a worthwhile upgrade in it's own right. However, if you install it on that machine in it's current state, CS4 will NOT fix your problems because you do NOT have a healthy system.
You asked for experiences with Leopard - I can launch every application in both CS3 and CS4 suites
i simultaneously,
and STILL not have your issues. I haven't experienced anything like your CS3 problems in Leopard - on both a 2006 Mac Pro and a 2008 Macbook.
If you'd like help to try and figure out the real problem, I'm more than happy to help. If not, Adobe will gladly take your money ...
-phil

Having a problem with "open" and "import" buttons!

Hello all,
I am having some trouble with a basic function in Logic. When I go to "file" and select "import," the window of options appears. However, when I select a file and click the "import" button, literally nothing happens. I have had a similar problem, when I go to the "file" menu and select "open." A window will appear for me to browse to the logic file I want to open, but when I click "open," nothing happens. However, if I manually go to the file and double-click it, then the file will open. The drop-down is set to "All logic document types," though I have tried "all Logic songs" with the same problem. Please help!
Best,
Jon

you know whats funny, this project has to do with arrays of objects and not inheritance. We learned inheritance last week but the lab we are doing which is this, is for arrays of objects. sorry for the confusion lol. so you can completely ignore this, it actually has it in big bold letters at the top of the web page for the lab.

Having a problem with drawImage() and dont know why...

OK, I'm having some problems drawing my image onto the frame.. It will let me draw string, add components, etc.. but as soon as it come to trying to draw an image it just doesn't wanna..
Here is my code:
import java.awt.*;
public class Messenger extends Frame {
     private boolean laidOut = false;
     private TextField words;
    private TextArea messages;
    private Button ip, port, nickname;
    public Messenger() {
         super();
         setLayout(null);
         //set layout font
         setFont(new Font("Helvetica", Font.PLAIN, 14));
         //set application icon
         Image icon = Toolkit.getDefaultToolkit().getImage("data/dh002.uM");
         setIconImage((icon));
        //add components
        words = new TextField(30);
        add(words);
        messages = new TextArea("", 5, 20, TextArea.SCROLLBARS_VERTICAL_ONLY);
        add(messages);
        ip = new Button("IP Address");
        add(ip);
        port = new Button("Port");
        add(port);
        nickname = new Button("Nickname");
        add(nickname);
    public void paint(Graphics g) {
        if (!laidOut) {
            Insets insets = insets();
            //draw layout
            g.drawImage("data/dh003.uM", 0 + insets.left, 0 + insets.top);
            ip.reshape(5 + insets.left, 80 + insets.top, 100, 20);
            port.reshape(105 + insets.left, 80 + insets.top, 100, 20);
            nickname.reshape(205 + insets.left, 80 + insets.top, 100, 20);
            messages.reshape(5 + insets.left, 100 + insets.top, 485, 300);
            g.drawString("Type your message below:", 5 + insets.left, 425 + insets.top) ;
            words.reshape(5 + insets.left, 440 + insets.top, 485, 20);
            laidOut = true;
    public boolean handleEvent(Event e) {
        if (e.id == Event.WINDOW_DESTROY) {
            System.exit(0);
        return super.handleEvent(e);
    public static void main(String args[]) {
        Messenger window = new Messenger();
        Insets insets = window.insets();
          //init window..
        window.setTitle("Unrivaled Messenger");
        window.resize(500 + insets.left + insets.right,
                      500 + insets.top + insets.bottom);
        window.setBackground(SystemColor.control);
        window.show();
}Im only new to Java, maybe I've left something out ? Any help will be much appreciated, thanks :)

Thanks! Got the image to display now... but, next problem.. its a strange one, whenever the application is minimized or has something dragged/popup over the top of it, those sections of text/images disappear... anyone know a reason for this? im using the d.drawImage() like displayed in my code above.. this is the final code for my image..
Image banner = null;
try {
     banner = ImageIO.read(new File("data/dh003.uM"));
} catch(IOException e) { }
g.drawImage(banner,0 + insets.left, 0 + insets.top, this);and as for my text...
g.setFont(new Font("Arial",1,14));
g.drawString("Type your message below:", 5 + insets.left, 425 + insets.top);Thanks in advance!

Having a problem with iTunes and internet radio. The programme keeps changing stations

I'm abroad at present and using a wireless connection at the lab. Itunes keeps changing internet radio stations as a function of time,
Any suggestions or os it a known problem with the current version?
Don

Try the following user tip:
"Invalid drive X:\" install errors

TS3694 I am having a problem with updating and restoring my iPhone 5 , I received an unknown error (3004)

Similar Messages

Maybe you are looking for