TS3694 I am trying to restore my ipad2 but i have the error message "The IPAD could not be rerstored. The device cannot be found"
I am trying to restore my ipad2 but i have the error message "The IPAD could not be rerstored. The device cannot be found"
Can anyone help me?
Are you using the latest version of iTunes?
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: “Not enough free space” alert when trying to sync
http://support.apple.com/kb/ts1503
You may need to delete iTunes on your computer and then reinstall.
How To Completely Uninstall and Remove All Traces of iTunes
http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
Cheers, Tom
Similar Messages
-
I am trying to update my iPod touches and keep getting an error message saying iTunes could not back up my iPod because a session could not be started. I have followed all trouble shooting advice found on the apple website, unplugged and replugged the device, restarted my computer, etc. Any suggestions would be much appreciated. Thanks
I have the same issue, except I can't even sync.
-
im trying to activate my ipad and an error message'your ipad cannot be activatewd because the activation server cannot be reached.
How do I connect?You don't have access to a computer, some other options are...l
Wait for a while and try again
Try activating your iPad using another WiFi network
Ask someone who does have a computer running iTunes for help.
Take your iPad to an Apple Store and ask them for help. -
trying to restore my iPad 2 but it says "turn off Find my iPad" on your device.
How its possible to turn it off since my iPad is in Safe ModeWhat do you mean by 'safe mode', do you mean that it's in recovery mode ? You should be able to log into your account on http://www.icloud.com and remove the iPad from the Find My iPhone section of your account
-
Ok I need help. I went to use my phone, put in my passcode, emergency dial came up, then the phone said I didn't have an imei #. I hit the back button and then I was told I needed to restore and update using iTunes. I tried several times to do this and my phone is still not working. It acts like it's updating, but once the bar reaches the other side of my phone, iTunes tells me there was an error. I used all the ports on my pc, changed cables, restarted my pc, and still nothing. Can anyone please help me. This phone is my life and I can't afford to get another one.
Sounds like you might need to take it to an Apple Store but if it is an iPhone 3G it would no longer be under warranty.
Looking at the Apple Store online you can get an iPhone 3GS from $49 on AT&T if it comes to having to get a new one. Your other option is second hand. -
I get a message that an update is available and when I install it the update stops half way through and I get the error code: U44M1I210 for Camera Raw and Elements 13.1 updates. I get the message "UPDATES COULD NOT BE APPLIED" Can someone help with this? Thank you. David
drmeyers381
Thanks for the follow up.
Is your Premiere Elements 13 on Mac computer?
I have not seen much in the way of alternatives coming from Adobe on the Premiere Elements 13.1 failed updates.
But there seems to be several discussions on U44M11210 in the CC products...one
Update failure. (U44M1I210) | Adobe Community
You could try the uninstall, free ccleaner, reinstall with antivirus and firewall(s) and then try for the Help Menu/Update for 13.1..
If Mac, https://www.piriform.com/mac/ccleaner
If Windows, CCleaner - PC Optimization and Cleaning - Free Download
The CC people seem to have the advantage of an online download of their update as well as the one via the Help Menu/Update.
Premiere Elements does not have that perk - update only via Help Menu/Update.
Please review and consider and please let us know of your progress as your schedule permits.
Thank you.
ATR -
I was trying to installed new ios update and suddenly my WIFI connection got desconnect. now I am trying to restore my Ipad2 but getting error saying "the Ipad could not restored, An unknown error accured (3194)". so please help me out to resolve the same.
When I restart my iPad the connect to iTunes comes up and stays on until it shuts down again, I have read a report from Apple support suggesting I reinstall iTunes so I might try that again and also your suggestion which i shall also try, but thanks again - rg1547
-
Hello,
When I am trying to restore my iphone I a getting an error message that reads, " The iPhone "iPhone" could not be restored. An unknown error occurred (2001)."
What does that error message mean?
v/r,
A Concerned customerGoogle is your friend.
http://support.apple.com/kb/ts3694#error2001
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service. -
Following updating my ipad2 to OS7 it asked for a passcode which I entered, when I turned the ipad off it requested the passcode but does not recognise the one I (thought) entered , the ipad is disabled. I tried to restore in itunes but wanted me to turn find my ipad off, as I can't get into the ipad i can't do this. Any suggestions as to how I can fix this?
For any of you with a similar problem, apple was able to help, you need to keep the round quite button press in while you connect your cable (which is it self connected to pc itunes) the ipad will then restore. hope this helps
-
Hello can someone please help? Trying to restore ipod and I keep on getting error message: The IPod software update server could not be contacted. The network connection was reset. Make sure your network is active and try again.
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem -
My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
I,m trying to restore my phone but I keep getting Error code 21.... help please iPhone 4S
Take a look at this Apple doc -> iTunes: Specific update-and-restore error messages and advanced troubleshooting
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
You could just update or uninstall the security software on your computer and then test again. -
I have a problem that my ipad could not connect or sync to my pc, my iphone could but my ipad couldn't. I tried more than step all of them didn't work,restore or launching in safe mode or reboot, all of them didn't work, help please
I have a problem that my ipad could not connect or sync to my pc, my iphone could but my ipad couldn't. I tried more than step all of them didn't work,restore or launching in safe mode or reboot, all of them didn't work, help please
-
hi,am trying to restore my ipod but i am getting this message each time:the ipod could not be restored-an unknown error occured,what should i do?
Was the complete wording of the error message? Usually an error number or other information is also provided
-
how to resolve error 21? my iphone 4 just showing apple logo... when i'm trying to restore it... it is showing error 21 n that's not letting me restore it pls help
From the article that the question was posted from:
Error 1611
This error typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
Try reading the solutions you find in the future and follow them.
Maybe you are looking for
-
G41 Fails to boot after updating BIOS
I hope that somebody has some suggestions, and thank you in advance. I am helping out a friend who has inherited a 2881-22U. I have managed to successfully upgrade to an 120GB HD and copy the Recovery partition to the drive. (Hey, you use what you
-
FF 5.0 uses all my CPU's. Can't even run simple news video clips in sync. I just don't like it's look, setup or speed. I have both 3.6.12 and 3.6.3 in my downloaded files and 3.6.12 on a backup thumb drive. I'd ''really''' like to go back to when the
-
Please help... Photoshop crashes whem opening raw files.
I am a professional photographer from Portugal, i have 6 macintosh to work with photoshop. My last machine, Mac Pro Identifier pattern: MacPro2, 1 Name of processor: Quad-Core Intel Xeon Processor speed: 3 GHz, with 9Gb of ram, OSX 10.5.5 ..... and j
-
Tabbing through form fields in app doesn't work in Firefox.
Is there a setting in Firefox that permits tabbing through form fields so that one doesn't have to use the mouse? This works fine in IE. for the same app without any configuration, but not in Firefox.
-
Bug in 9.1.1 release : In mail from iphoto changing size not shown in MB
Could someone figure out how to report back to apple that we LIKE the 9.1.1 release that fixes it so you can select the size of your photo (smalll, medium, large, actual and optimized now) BUT the problem is that when you have preference MAIL FROM I